biomass Equipment For Sale

2016 Morbark 6600 Track Horzontal Grinder, Cat C32 1200 hp with 10,022 hours, Radio Remote, Magnetic Head Pulley. Work done. 5/23 fan pump replaced $8000 6/22 poclain feedwheel motor replaced. $20,000 4/24 Fan bearing replaced. $2000 5/24 yoke cylinders rebuilt. $500 5/24 new belly belt and all new parts associated with except the pulley drum. Shaft, b-locs and bearings replaced. Also metal siding and skirt. $8-10,000 6/24 2 new turbos. $12,000 6/24 new fan motor and side load adapter. $6500 6/24 feedwheel bearing replaced. Possibly shaft. $1500 6/24 discharge bottom bearings replaced Work done to infeed floor. Belly belt motor rebuilt. 3 injectors have been replaced. 2 out of 3 wiring harnesses replaced. Rebuilt fan motor. Has newer grates. (2) 8” hex. (2) 7x16 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Morbark 6600 Horizontal Grinder, one owner. 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Morbark 6600 Horzontal Grinder with 7,600 hours, Cat C-32 Engine, 1050hp, 5th Wheel, Radio Remote, Magnetic Head Pulley. Weight: 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Morbark 6600 Horizontal Grinder, Cat C32 1200hp with 5,596 hours, Radio remote, Magnetic head pulley. Weight: 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Morbark 6600 HG Rebuilt CAT 1000 Hp engine Approx 2100 hours Magnet Great for processing pallets, brush, green waste & more

2018 Morbark Model 4600XL Track Horizontal Grinder, Engine is a Caterpillar C-27 1050 HP Engine. Has 2,400 Hours of Running Time and 1,000 Hours Idling time, Undercarriage is 95%, Wireless Remote Control, Air Compressor, Metal Pully on Discharge Conveyor, Various Screen Sizes Ready to Work. Gross weight: 88,640 lbs. Length: 45” Height: 11’11” Width: 11’3” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Morbark 4600XL Horzontal Track Grinder, Cat C27 with 7,500 hours, Magnetic Head Pulley, Radio Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Morbark 4600xl Horizontal Grinder, Cat 1050hp, 6952 hours, Radio Remote, Magnetic Head Pulley. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Morbark 4600XL Track Horizontal Grinder, Cat 1050hp 8003 hours, Pt tech clutch, Radio Remote, Magnetic Head Pulley. Weight 88,640 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Morbark 4600XL Track Horizontal Grinder, Cat 1050hp 8003 hours, Pt tech clutch, Radio Remote, Magnetic Head Pulley. Weight 88,640 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Morbark 6400XT Track Horizontal Grinder C32 Cat diesel with 1890 hours, Cat platinum warranty 5 years or 8000 hours. 42" x 61 3/8" Hammermill System w/ 28" diamter rotor and 1" thick rotor plates 40" diameter feed roll Dust Suppression System Hydraulically operated debris containment door Rod Puller 325L GD CAT undercarriage with double grouser pads, Ready to Grind… Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Cat 3412E 860hp Engine status report shows 43% average load factor, 3317 idle hours. 8899 hours on original engine. Completely serviced and runs properly. Morlift 500 loader with tight grapple, A/C cab all nicely fitted. Auxiliary air compressor Michigan model 40 knife grinder Extra knives Very sound, tidy chipper throughout. Call for complete condition report.

2017 Morbark 50-48 Drum Chipper -6590 hours -Tight and dry -Well maintained -Just spent 100k on feed chains new chute and much more Does not need a thing

2004 Morbark 50/48 Whole Tree Drum Chipper. 11,000 hours on a rebuilt 3412 CAT engine with 760HP, Auto Feed, Fire Suppression, Radio Remote and Tether cord. Machine was repainted. Length 40'8.25" Height 12'6" Width 9'9" Gross Weight (approx.) 72,120 lb

2014 Morbark 50/48 B NCL Whole Tree Drum Chipper, Cat 1050hp with 11,000 hours, Infeed chain, Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

CAT Platinum engine warranty until 6k or Feb 2026. C27 1050 HP, Remote working in woods – hours will go up.

2019 Morbark 50/48X -5,591 hours -Brand new wet clutch -New gearbox -New EGR Cooler -The drum has new knife holders, clamps, and bolts. -Comes with 5 sets of knives and 2 sets of counter knives Hours will rise as it is a working unit!!!!!!

MLS Number 1142424 2010 Morbark 5500 Flail Debarker 4260 run time hours and 2717 idle hours 600 HP John Deere Tier III engine Reversing fan 3 Flail-Drum Build date 5/12/10; Delivered new 12/12/12 Infeed opening 23" x 55" Discharge system = 72" wide by 24" long dual folding drag chain conveyor 285 gallon fuel tank; 360 gallon oil tank. Remote control Remote tether Standalone machine 66,500 lbs. Very well maintained Good working condition. Parts/owner and engine manuals

2019 Morbark 40/36 Drum Chipper -1500 hours -C-18 CAT -Deleted -Clean Unit