biomass Equipment For Sale

1995 McCloskey 621 Trommel Screen -6634 Hours -Tight and dry -Belts are good -Hoses are good -1/2 inch screens Only was used for leaf and compost

1995 McCloskey 833 Trommel -9000 hours -Meter might be faulty -Engine runs strong -Needs -Drum chain -Feed conveyor drive chain -Batteries

2008 McCloskey 412 -2500 hours -New brushes -Fluids been flushed -New coat of paint -Swivel Conveyor -Smaller job trommel

(2) McConnell 40-50 MM BTU Gas Burners available

8' x 30' MEC triple pass drum dryer with biomass burner. Perfect for pellets, shavings, grindings, sawdust, and countless other projects. Excellent condition! We can provide any additional equipment to complete or upgrade your plant!

MEC 10x40 Single Pass Drum Trunions Controls

MEC 12'x42' Triple Pass Drum Trunions Cyclone available

12x42 Triple Pass Drum Sawdust Burner Controls Cyclone Pipiing Blower

MOLLERS HSA Automatic Stretch Hooding SystemSpecifications: -- Max. pallet size: 48" x 48" x 120" -- Capacity: up to 120 units per hour (depending on load height and length) -- Main motor: 2 HPFeatures: -- Fully automatic -- Tubular film is automatically fed and stretched over the load -- Handles a variety of load heights automatically

MOLLERS HSA Automatic Stretch Hooding System with Corner Board ApplicatorSpecifications: -- Max. pallet size: 48" x 48" x 120" -- Capacity: up to 120 units per hour (depending on load height and length) -- Main motor: 5 HP -- Corner board system: -- Automates the process of placing 4 corner boards. -- Each corner board magazine can hold up to 30 corner boards. -- Carousel design, servo driven corner board applicator allows for precise positioning during corner board retrieval and for proper staging.Features: -- Fully automatic -- Tubular film is automatically fed and stretched over the load -- Handles a variety of load heights automaticallyApplications include: -- Pallets of smooth boxes or uneven containers that need to be secured on a pallet -- Cereal / grain based products -- Chemical / industrial -- Prepared / convenience foods -- Household goods -- Snack foods

Montgomery Blo Hog S/N 781 ER18" HDGM Drop Feed w/75HP Motor

MONTGOMERY BLO-HOG Top-Feed Wood GrinderSpecifications: -- 13" x 18-1/2" Top feed opening; 75 HP direct drive motor at 1,200 RPM. -- Unique cutting action involving stationary anvils positioned on the side of the machine with rotating teeth (hammers) that pass through rectangular pockets formed by these anvils. -- This positive cutting action between the teeth and anvils performs what amounts to the first particle-sizing function in a two stage process. -- The second sizing action occurs when the material cut by the action of the teeth against the anvils is directed downward and across a curved particle-sizing screen which fits underneath the rotating element. -- The machine is mounted on a elevated base providing ample room for discharge. -- Actual model is ER 18S315FHDL.

Jacobson Swing Hammer Mill, Top Infeed, Bottom Discharge, 75HP Electric Motor.

In good condition. Has 50” opening. No drive motor but would take 100-200HP depending on material being run. No screen included. Very heavy weighs approximately 4 ton.

1992 Morbark 1200 Tub Grinder -10500 hours - 1200 cat 3412 twin turbo 650hp -Mill completely rebuilt and new bearings with 200 hours on it ($33k in repairs) -Replaced turbo pedestal and rebuilt turbos -Entire mill was replaced new with new bearings -Hours are a guess meter says under 1000 I believe so I’m guessing it rolled -Hydraulic cylinders were rebuilt on boom except for squeeze cylinder on grapple -The turn motor on grapple leaks a little -One of the stiff leg cylinders bleeds down for unhooking from truck Ready to grind

1993 Morbark Model 1200 Tub Grinder, Equipped with a Cummins 650 HP Engine, Autofeed, Wireless Control, New Clutch 1 year ago, Hours are Unknown, New Turbo, New Injectors 300 Hours ago, Ready to Work. Weight 55,622 lb Length 38.15 ft Width 11.9 ft Height 12.8 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1996 Morbark 1200 -CAT motor approximately 3500 hours -Motor was replaced at 7000 hours -Engine runs great -Rollers and the Chain that turns the Tub need some work -Have the rollers for it Budget Grinder !!!!

2004 Morbark 2070XL Chipper with Cat 86HP Diesel, 1000 Hours, Good Running Chipper.

1994 Morbark Model 1200WCL Tub Grinder, Caterpillar 3412 Engine, hours unknown, Joystick Controls, Square Wear Plates, Enclosed Cab with Heat, Clutch replaced recently, 4" Screen and 2" Round Secondary Screens. Length 36 ft 0 in Width 11 ft 11 in Height 13 ft 6 in Weight 50,020 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Morbark 1200XL-WCL -7571 hours -CAT C27, 875 HP -Cab Loader Option -New Floor -Spare Rotor, Screens, Tips, and Parts Package -Turn Key Ready to Grind