Hogs and Wood Grinders For Sale

SCHUTTE 280.100 HAMMERMILL -- Type 13100P -- Rotor 24" dia. x 48" wide -- Housing 3/4" thick -- Shaft speed 3,600 rpm -- Heavy duty, statically and dynamically balanced rotor -- (96) Standard notched heat treated hammers 3/8" thick -- Also included; two screens -- Motor 125 HP -- Applications; Planer shavings, dry wood chips, etc. etc.

Schutte model 280.100 Hammer Mill Includes: (2) 125 HP Motors - new 480v and used 575v Includes: (3) Screens: Approx 1", 3/4", 3/8" (to be confirmed) Includes: Stand and soft start

Schutte horizontal hog, replaced shaft w/ blower & motor, heavy duty design (ref #162) Call Amy for more information (928) 723-9449

Grinder. This machine is a Shutte grinder. With Webster vibratory infeed. Item #C625

Schutte Hammer Mill 40-HZF with 100HP Electric Motor. No. 172 Attached Blower.

SCHUTTE-BUFFALO 15 Series, Model 15300 Wood Grinder;Complete with the following components and features: --Carbon Steel Construction. --Rotor approximate 44" diameter x 72" wide. --Approximately 3" wide Swinging Hammers, tip speed 20,700. --Top feed, bottom discharge. --Bottom screen approximate 5040 square inch area. --Clam shell housing. --500 HP, TEFC, 3/60/460 volt, 1785 RPM drive Motor with coupling and shaft guard. --Mounted on a heavy-duty steel Factory Frame. --NOTES: Largest model of the 15 Series. &#9679 Machine weight 16,000 Lbs.

SHRED-TECH - ST100, ...Dual Shaft ShredderNew in 2019Specifications: -- Motors: (2) 50 HP. -- Cutter width: 1.5" Approx. -- Cutting Chamber: 32" x 60". -- Control Panel. -- Mounted on stand. -- The ST-100 Industrial Shredder is a complex, heavy-duty shredder machine that features a 32"; x 60"; cutting chamber, which enables it to handle a wide range of products as well as bulky wastes. It can tear through some of the tougher loads, such as wooden pallets, metals, hazardous wastes, passenger tires, and more.Once these products go through our shredder, they end up in a smaller, optimum shred size. It works with a large-duty throughput of up to 3 tons per hour, working much more efficiently for the business

SHRED-TECH - ST20, ...Dual Shaft ShredderSpecifications: -- Motor: (1) 20 HP. -- Cutter width: 3/4" Approx. -- Mounted on stand. -- Feed Hopper.

SHRED-TECH - ST50, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 20 HP. -- Cutter width: 1" Approx. -- Cutting Chamber: 20" x 35". -- Control Panel. -- Mounted on stand. -- Feed Hopper: 21" x 40" Opening.Can be shown under power.

SHRED-PAK - 180, ...Double Shaft ShredderSpecifications: -- (2) 75 HP Motors. -- Hook Knives: 2"; (32) knives. -- Conveyor: 60" Wide x 24 ft. long for feeding or exit. -- Control Panel: 600 - 120. -- Stand.Loaded onto Truck.

SHRED-PAX - AZ-80, ...Shredder -- Dual Shaft Shredder. -- Motors: (2) 40 HP. -- Blades: 1" Width; (26) blades total. -- Crescent Moon Ram Assist. -- Ram rebuilt. -- Loaded onto your Truck.

Sprout Waldron Mdl 2548 Hog with 200HP Motor

Sprout-Bauer Hammer Mill 38-12.4 H-Mill S/N 88-1530 W/ 100HP Electric Motor.

Sprout-Bauer Hammer Mill Model 38-12 H.M. - S/N 90-0269 W/100HP Electric Motor

SSI Model - 1200-E, Slow Speed, High Torque ShredderSpecifications: -- 50 HP Motor; twin shafts with (27) 2" knives on each shaft; 52" x 22" chamber opening; 12-1/2" cutter dia., 1" thick; 25" x 58" bottom discharge.Includes: -- Stand, feed hopper; controls with spare 100 HP motor. -- Total footprint: 145" long x 4' wide x 55" stand height. -- Excellent for e-Waste/e-Scrap; tires, rubber, plastics, metals, hard drives, wood products, batteries, and large pieces of material.

SSI Model - 1000-E, Slow Speed, High Torque ShredderSpecifications: -- 50 HP Motor; twin shafts; 40" x 25" ChamberIncludes: -- Stand, feed hopper; controls

SSI - 2400H, ...Mobile Tire ShredderSpecifications: -- Chamber Size: 60" x 40" -- 200HP Hydraulic Driven -- Mobile Shredder

SSI Model - 3000-H, Slow Speed, High Torque ShredderSpecifications: -- 200 HP Motor; twin shafts; 41" wide x 50" long ChamberIncludes: -- Stand, feed hopper; controls

SSI - SR-375H, ...Uni-Shear Shredder -- Singler rotor Shredder -- Main Motor: 150 HP. -- Hydraulic Ram Motor: 25 HP. -- Feed Opening: 49" W x 77" L. -- Soft Start. -- Speed: Medium. -- Ram: Hydraulic. -- Screen: 3" W x 6" L. -- Extra Set of new teeth (not installed). -- Ideal for: Wood, Paper, Plastics, and other brittle materials. -- Owner was shredding only plastic pails.

SSI - M-70-E, ...Dual Shaft, Low-Speed, High Torque ShredderEffective in bulky item reductio; product destruction or preconditioning (primary shredding) where output particle size variation is acceptable. Output consists of strips the width of the cutters (usually 1" - 3").Equipped with: -- 60 HP Drive motor; cutting chamber 29" x 40"; hopper opening 55" x 67"; cutting disc diameter 14.4"; cutting disc thickness 1-1/2". -- Auto reversal protects components; advanced bearing protection system assures longevity. -- Suitable for: Wood, plastics, electronic scrap, medical waste, textiles, and tires.