Hogs and Wood Grinders For Sale

Excellent condition Less than 6 hrs on machine

REINBOLD AZR 600 S Hopper Feed Low Noise GrinderSingle shaft compact shredderSpecifications: -- Opening 600 mm X 800 mm H (23.6" X 31.5") approx .6 cubic meter -- Rotor diameter 252 mm (9.92") with 90 RPM -- Main motor 11 Kw (15 HP) -- (15) Knives -- Discharge 160 mm (6.3") with screen 15 mm holes -- Hydraulic pumpimng unit with 3 HP -- Machine weight 2900 lbs

REM - CC10, ...Used Can FlattenerThe REM Can Crusher is a complete separating, crushing, and blowing unit for aluminum cans.Specifications: -- Efficiently processes: 1,800 - 2,000 Lbs per hour. -- Load cans in the hopper and the conveyor carries the cans across the magnetic head pulley separating the steel from aluminum. -- The aluminum cans are crushed between a steel pressure plate and the rotating crusher drum with hardened steel bars; the cans then drop into a high-velocity air stream and are blown into a trailer or storage container. -- Features: 16" Wide belt; Crusher with: 10 HP 240/480-Volt, 3-phase; Blower with: 7.5 HP 240/480-Volt, 3-phase.

2005 Rotochopper Cp118 -1600 hours -120 hp engine -Lights and tires -One belt needs a patch(will be repaired)

RotoChopper S824E Grinder S/N 10-2446

Manufacturer’s Specifications Dimensions - Length: 46' 4? – 52' 6? - Width: 8' 6? - Height: 13' 6? - Weight: 42,000 – 47,000 lbs. Power Supply - 535 HP diesel engine - 200-gallon fuel capacity - PT Tech hydraulic clutch - Reversible radiator

SANDVIK QJ241 Jaw Crusher --New in 2015 - Tier 3 Engine --Productivity - Highly productive 1000 x 650 mm / 40"; x 26"; jaw opening for maximum throughput -- Hydraulic CSS jaw setting adjusted using control panel or handset, to avoid interruptions --Load sensing system for feeder drive and jaw level sensor ensure continuous crushing --Ideal for recycling with reverse crush, overband magnet and hydraulic raise and lower facility on main conveyor for rebar clearance

SAS SCORPION ENGINE PULLER Model SC40 DescriptionIncrease cash recovery from your recycling operationsSAS Forks Scorpion High Speed Motor Puller – Scrap Yard Engine Puller – Auto Recycling Engine Puller – Excellent for self service yards processing vehicles before crushing.Generate revenue:Process end of life vehicles in less than 60 seconds.Pull scrap engines and transmissions in 30 seconds.30% more revenue by separating metals from bodies.1000% more revenue per lb. on wire harness from engine compartment and dash.80% more visibility with a direct line of site from the operator’s window through the forks.Cycle time less than 15 seconds from park to full extension.Serviceable for long life. Replace blades in 3 hours or less.estimated only.Engineered & built for optimum performance:Engineered tough for continuous prying and durability.Hardened pins and bushings and grease-able pivot points for extended service life.Hydraulic hoses and cylinders are protected to minimize potential damage from sharp objects.Built with high strength blades and carriage skid plates for extended service.Clean up of ground debris is a snap with center plow blade.Speed is paramount in this design. Operator uses grapple from the cab, no torches, no personnel needed to hook up chains to pull or move engines. Safer, quicker and less costly removal of engines and transmissions.

Schutte model 280.100 Hammer Mill Includes: 125 HP Motor - 480v Includes: (3) Screens: Approx 1", 3/4", 3/8" (to be confirmed) Includes: Stand

SCHUTTE 280.100 HAMMERMILL -- Type 13100P -- Rotor 24" dia. x 48" wide -- Housing 3/4" thick -- Shaft speed 3,600 rpm -- Heavy duty, statically and dynamically balanced rotor -- (96) Standard notched heat treated hammers 3/8" thick -- Also included; two screens -- Motor 125 HP -- Applications; Planer shavings, dry wood chips, etc. etc.

Schutte Pallet Hog - Model 56-35 heavy duty horizontal hog.   Features 50 inch wide horizontal feed  opening with top and bottom powered rolls; 50  2-way, reversible swinging hammers with hardsurfaced tips ; 250 HP direct drive electric motor; 3/4" thick screen with 1-3/8" diameter holes;    Rear discharge.   Electrical cabinets included.   Hammers are approximately 1-3/4" x 5" x 8".    Serial #0506071.

Schutte Swing Hammer Grinder

SCHUTTE-BUFFALO 15 Series, Model 15300 Wood Grinder;Complete with the following components and features: --Carbon Steel Construction. --Rotor approximate 44" diameter x 72" wide. --Approximately 3" wide Swinging Hammers, tip speed 20,700. --Top feed, bottom discharge. --Bottom screen approximate 5040 square inch area. --Clam shell housing. --500 HP, TEFC, 3/60/460 volt, 1785 RPM drive Motor with coupling and shaft guard. --Mounted on a heavy-duty steel Factory Frame. --NOTES: Largest model of the 15 Series. &#9679 Machine weight 16,000 Lbs.

Grinder. This machine is a Shutte grinder. With Webster vibratory infeed. Item #C625

Schutte Hammer Mill #40 S/N 111375-R

Schutte Hammer Mill 40-HZF with 100HP Electric Motor. No. 172 Attached Blower.

SCHUTTE BUFFALO - Model WA16L, ... HammermillModel# WA16L, 3500 RPM, with filtration system and multiple grates for destruction sizes. -- It also includes Electrical panel. -- This system is apart and palletized. All you have to do is pick it up and transport it to you. -- System was in perfect working order when it was taken apart and palletized for transport. -- The system is perfect for the destruction of computer hard drives and different types of media.

SHREDPAX AZ-45 Dual Shaft ShredderSpecifications: -- QTY 2 20 HP Motor -- Voltage 480 V, 60 Cy, 3-Ph. -- Dual Shaft -- Support Stand IncludedLoaded on your truck

SHRED-PAX - AZ-80, ...Shredder -- Dual Shaft Shredder. -- Motors: (2) 40 HP. -- Blades: 1" Width; (26) blades total. -- Crescent Moon Ram Assist. -- Ram rebuilt. -- Loaded onto your Truck.

Sprout-Bauer Hammer Mill 38-12.4 H-Mill S/N 88-1530 W/ 100HP Electric Motor.