Hogs and Wood Grinders For Sale

Hogs and Wood Grinders 

Band Mills (Wide) (40) Band Mills (Thin Kerf) (38) Debarkers (82) Edger-Boards (55) Forklifts (33) Gang Saws (57) Hogs and Wood Grinders (216) Log Loaders (2) Portable Sawmills (10) Resaws-Band (197) Scragg Mills (44) Trim Saws (97) Unscramblers (33) Wheel Loaders (47) Wood Chippers - Stationary (129)
Air Compressors (127) Airlocks (32) Banding-Strapping Machines (48) Blowers and Fans (124) Boilers (22) Bolter Saws (1) Carriages (Sawmill) (26) Carriage Drives (Sawmill) (52) Chip Bins (19) Chip Cyclones (22) Chip Screens (42) Chipping Canters (3) Chop Saws (56) Circular Saw Husks (8) Circular Sawmills (62) Conveyors (93) Conveyors Board Dealing (79) Conveyors Deck (Log Lumber) (192) Conveyors General (55) Conveyors-Auger (5) Conveyors-Live Floor (9) Conveyors-Lug Loader (1) Conveyors-Run-Around (4) Conveyors-Vibrating (50) Conveyors Belts (197) Conveyors-Barn Sweep (31) Conveyors-Live Roll (116) Dip Tanks (4) Drum Dryers (18) Dry Kilns (43) Dump Hoppers (3) Dust Collection Systems (248) Edger Tailing Devices (4) Edgers-Gang (45) Edgers-Slab (8) Edgers-Vertical (6) Electrical (165) Gang Rip Saws (120) GenSets (18) Hammer Mills (8) Hydraulic Power Packs (90) Knife Grinders (18) Laser Lights (6) Log Home Machinery (14) Log Merchandising Systems (17) Log Turners (Sawmill) (37) Lumber Carts (28) Lumber Sorters (5) Lumber Stackers (21) Lumber Stickers (1) Magnetic Separators (2) Mat Equipment (2) Metal Detectors (33) Misc (107) Operator Cabs (29) Package Saws (3) Panel Saws (3) Parts and Parts Machines (12) Plywood OSB and Panel Boards (5) Post and Pole Peelers (18) Power Units-Engines (2) Radial Arm Saws (25) Resaws-Circular (2) Round Tables (3) Scanning Systems (2) Scissor Lifts (57) Screening Systems (5) Setworks - Sawmill (6) Shapers (1) Sharpening Equipment (118) Shavings Mills (16) Slab Saws (6) Stake Pointers (1) Straight Line Rips (4) Tie Processings (3) Tilt Hoists (15) Wrap and Packaging (12)

Filtering

Reset All 

thru
 Used     New
Viewing Page 2 of 11
216 Results Found
Sort By 
Recently Added Items
2019 Weima Beaver 300 Horizontal Grinder with Vibrating Infeed
Call For Price
2019 Weima Beaver 300 Horizontal Grinder with Vibrating Infeed
2022 Weima WL6 Wood Grinder
Call For Price
2022 Weima WL6 Wood Grinder
$ 72,500

Cresswood Model EF 50-100A Horizontal Shredder 100 HP 12' Vibratory Conveyor (2) Feed Rollers Screw Auger Discharger Inclined Conveyor with 10" Magnetic Head Pulley Discharge Height 116" Crossbelt Magnet Soft Start Extra Set of Cutters 2 New Screens 1/2" Screens

Mitch Stevens
828-773-6986
Call

Call for Price

Ellison Sales, Inc.
503-244-0161
Call

Call for Price

GENOX V600 New Single Shaft ShredderIn Stock - Ready to Ship!Features --Shock Absorbing Gearbox that reduces stress on Drive Components -- 25 HP Motor -- Hopper Opening - 48" x 43" -- Rotor Diameter - 9" -- Rotor Knives that can be used on four edges before replacement. --Durable Counter Knives that adjust to maintain cutter clearance --Quick Change Screens for accurate particle size control --Segmented Shredding Chamber Floor with Brass Guides --Twin Speed Hydraulics with an integrated air cooler --Stand-alone Electrical Control Panel with Siemens PLC Control System --Tested, Approved, and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

Jim Reedy
800-374-5009 ext:455
Call

Call for Price

GENOX V800 New Single Shaft ShredderIn Stock - Ready to Ship!Features: -- Shock Absorbing Gearbox that reduces stress on Drive Components -- 50 HP motor -- Hopper Opening - 59" x 56" -- Rotor Diameter - 15.75" -- Rotor Knives that can be used on four edges before replacement. -- Durable Counter Knives that adjust to maintain cutter clearance -- Quick Change Screens for accurate particle size control -- Segmented Shredding Chamber Floor with Brass Guides -- Twin Speed Hydraulics with an integrated air cooler -- Stand Alone Electrical Control Panel with Siemens PLC Control System -- Tested, Approved and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

Jim Reedy
800-374-5009 ext:455
Call

$ 157,500

GRANUTECH-SATURN - 96-50: Dual Shaft ShredderSpecifications -- (4) 100 HP Motors. -- Feed Opening: 96" x 50". -- Dual shaft with: Independent driven shafts. -- Dual power units with: Oil coolers. -- Loaded onto your Trucks.

Jim Reedy
800-374-5009 ext:455
Call

Call for Price

Gruendler 50XD Wood Hog Pkg, s/n 21419, built in 1972, 59" wide x 73" across-the-shaft top infeed opening, bottom discharge, with estimated 2" to 3" square hole screen grates, mounted on steel subbase for direct coupling 350hp 885rpm 575vac motor with Falk coupling. Includes magnetic separation system.

 Vancouver, BC
Ellison Sales, Inc.
503-244-0161
Call

Call for Price

 Portland, OR
Ellison Sales, Inc.
503-244-0161
Call

Call for Price

 Minneapolis, MN
Ellison Sales, Inc.
503-244-0161
Call

Call for Price

Jacobson Hammer Hog Mdl 2425 With 75HP Electric Motor

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Jeffrey Hammer Mill 30WB S/N 14168

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Jeffrey 34WB Hammermill Hammer Hog S/N 11979, Top opening is 21" x 33", Bottom discharge, No drive, Includes 35" x 55" x 60" tall Hopper

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Jeffery Hammermill 34x24 w/125hp motor

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 12,500

Jeffrey waste grinder, 34" wide capacity, top feed/ bottom discharge, includes new set of hammers and screens, very good condition and ready to work

Showcase Equipment
260-250-4645
Call

Call for Price

Ellison Sales, Inc.
503-244-0161
Call

Call for Price

Jeffrey 36x36 HOG s/n 11136

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 12,500

Jeffery waste grinder, top feed opening is 44" wide x , swinging hammer style, includes blower and infeed belt conveyor, blower and belt are hyd powered, good working condition

Showcase Equipment
260-250-4645
Call

$ 9,500

Jeffery waste grinder, top feed opening is 27" x 33", swinging hammer style, bottom discharge, working condition

Showcase Equipment
260-250-4645
Call

Call for Price

Ellison Sales, Inc.
503-244-0161
Call

Call for Price

Jeffrey Rader 1500 HP Wood Hog Model 610 WLE Endurahog

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 37,500

JEFFREY - 30 WB: Hammermill Specifications & Features -- 60 HP Motor. -- Rigid, welded, all steel construction; provides rugged housing for the toughest applications; assures: Long life; low maintenance; low operating costs. -- Welded screen bar Sections; fabricated from: Alloy steel allowing more discharge area for greater capacity. -- Large dia. "hammer pins": Increase pin wearing area; promote max. life. -- Adjustable hinged Breaker Plate allows exact settings for: Varying product sizes; accommodates plate wear; improves end product quality; maximizes liner life. -- Drilled & tapped Rotor Shaft permits: Hydraulic bearing removal; reduces maintenance time; increases production time. -- Double sealed Roller Bearings take: Load; resists contaminants; promotes longer service life. -- Replaceable, hardened/heat-treated Liners guard against: Wear; Heavy impact. - Liners are: Drilled; tapped; bolted from the outside; assures: Integrity resulting in less downtime & lower repair costs. -- Heavy-Duty, disc-type rotor mounted on high-strength alloy steel shaft with: Self-aligning roller bearings; rotor is statically & dynamically balanced for smooth operation; delivers long service life. -- Swing hammers are available in several configurations and interchangeable for various product sizing; assures: Longer life; consistent product sizing; lower operating costs. -- Readily accessible rear doors open to allow: Access to the Hammermill for inspection & maintenance; reduce maintenance time; simplify repairs. -- Large, clean-out inspection covers; doors are easily accessed. -- Extended lower housing with: 180º Product discharge area; aids material movement; reduces the tendency to plug; increases effective capacity, reduces horsepower requirements; lowers operating costs. -- JEFFREY's Hammermill Frame: Constructed from: Heavy plate; ensures a long service life. -- Bearing fill block: Allows easier bearing removal; eliminates the need to remove the rotor; reduces maintenance time & costs.

Jim Reedy
800-374-5009 ext:455
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved