Hogs and Wood Grinders For Sale

Believe Champion Swing Hammer Hog 30"

(2) CME #18 chipping heads, 125hp motors: $25,000

CRESSWOOD HF-60-75 Hopper Fed Low RPM GrinderRecommended for wood waste, whole pallets, plywood, particle board and other similar products. Equipped with: -- 75 HP motor; low noise, 78" x 60" cutting chamber, 60" ram stroke, 16" dia. rotor x 60" long, 98 RPM grinding speed; Features: -- 1" Steel frame thickness, 4-1/2" shaft diameter, (100) cutting tooth "Destroyer" cutting head, replaceable anvils; 5/8" screen. -- 14' x 10' Floor space, approx. 18,000 Lbs shipping weight.Includes: -- Inclined discharge conveyor with crossbelt magnet; 9.5' x 8' x 3' extended hopper opening; electrical control panel, PLC controlled hydraulics, 3 HP hydraulic unit, fluid clutch on drive; auger discharge..

?Cresswood EF-60 Grinder 100 HP 60” Wide Feed Opening Includes 60”W Vibrating Conveyor (shaker table)

Cresswood Model EF 50-100A Horizontal Shredder 100 HP 12' Vibratory Conveyor (2) Feed Rollers Screw Auger Discharger Inclined Conveyor with 10" Magnetic Head Pulley Discharge Height 116" Crossbelt Magnet Soft Start Extra Set of Cutters 2 New Screens 1/2" Screens

CRESSWOOD HF-30-30 SR Low RPM Waste GrinderEquipped with: -- 30 HP Drive motor, 10" Rotor dia; 30" Rotor length, (42) indexable, replaceable cutter inserts. -- The cutting chamber is 30" x 39", hopper volume is 1.25 cu. yards, and floor area of the unit is 89" x 66". Features: -- Ram assembly includes a machined ram with a 26" ram stroke, premium quality top and bottom guides, and an oversized cylinder rated for 3,000 PSI (over twice its operating pressure). Complete with: -- PLC control with load sensor; hour meter, digital cutterhead amp meter, auto-reverse at start-up.Note: the knives might need to be replaced. The knives on the rotor are "flats" designed for particle board shredding. To do hardwoods/softwoods, he will need to rotor a new full set of cupped inserts/knives

FCM - RS-30: 30 HP Vertical Feed Hammer HogSpecifications -- Intake: 14" x 18". -- Drive motor: 30 HP. -- Extraction: 8" Diameter. -- Screen with: 3/4" Holes. -- Magnetic starter.

GENOX V800 New Single Shaft ShredderIn Stock - Ready to Ship!Features: -- Shock Absorbing Gearbox that reduces stress on Drive Components -- 50 HP motor -- Hopper Opening - 59" x 56" -- Rotor Diameter - 15.75" -- Rotor Knives that can be used on four edges before replacement. -- Durable Counter Knives that adjust to maintain cutter clearance -- Quick Change Screens for accurate particle size control -- Segmented Shredding Chamber Floor with Brass Guides -- Twin Speed Hydraulics with an integrated air cooler -- Stand Alone Electrical Control Panel with Siemens PLC Control System -- Tested, Approved and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

GENOX V600 New Single Shaft ShredderIn Stock - Ready to Ship!Features --Shock Absorbing Gearbox that reduces stress on Drive Components -- 25 HP Motor -- Hopper Opening - 48" x 43" -- Rotor Diameter - 9" -- Rotor Knives that can be used on four edges before replacement. --Durable Counter Knives that adjust to maintain cutter clearance --Quick Change Screens for accurate particle size control --Segmented Shredding Chamber Floor with Brass Guides --Twin Speed Hydraulics with an integrated air cooler --Stand-alone Electrical Control Panel with Siemens PLC Control System --Tested, Approved, and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

GRANUTECH-SATURN - 96-50: Dual Shaft ShredderSpecifications -- (4) 100 HP Motors. -- Feed Opening: 96" x 50". -- Dual shaft with: Independent driven shafts. -- Dual power units with: Oil coolers. -- Loaded onto your Trucks.

JEFFREY 30 WB Hammermill Specifications & Features: -- 60 HP Motor. -- Rigid, welded, all steel construction provides rugged housing for the toughest applications; assures long life, low maintenance, and operating costs. -- Welded Screen Bar Sections: Fabricated from alloy steel allowing more discharge area for greater capacity. -- Large dia. Hammer Pins increase pin wearing area; promote max. life. --Adjustable Hinged Breaker Plate allows exact settings for varying product sizes and accommodates plate wear; improves end product quality and maximizes liner life. -- Drilled & Tapped Rotor Shaft permits hydraulic bearing removal; reduces maintenance time and increases production time. -- Double Sealed Roller Bearings take the load and resist contaminants; promotes longer service life. -- Replaceable, hardened/heat-treated Liners guard against wear and heavy impact; Liners are drilled, tapped, and bolted from the outside; assures integrity, resulting in less downtime and lower repair costs. -- Heavy-Duty, disc type Rotor mounted on high strength, alloy steel shaft with self-aligning roller bearings; Rotor is balanced statically and dynamically for smooth operation; delivers long service life. -- Swing hammers are available in several configurations and are interchangeable for various product sizing; assures longer life, consistent product sizing, and lower operating costs. -- Readily accessible rear doors open to allow access to the Hammermill for inspection and maintenance; cuts maintenance time and simplifies repair efforts. -- Large, clean out Inspection Covers and Doors are easily accessed. -- Extended lower housing with: 180º Product discharge area; aids movement of material and reduces the tendency to plug; increases effective capacity, reduces horsepower requirements, and lowers operating costs. -- JEFFREY's Hammermill Frame constructed from: Heavy plate; assures long service life. -- Bearing fill block: Permits easier bearing removal and eliminates the necessity of removing the rotor; reduces maintenance time and costs.

Jeffrey Hammer Mill 30WB S/N 14168

Jeffrey 34WB Hammermill Hammer Hog S/N 11979, Top opening is 21" x 33", Bottom discharge, No drive, Includes 35" x 55" x 60" tall Hopper

Jeffrey waste grinder, 34" wide capacity, top feed/ bottom discharge, includes new set of hammers and screens, very good condition and ready to work

Jeffery waste grinder, top feed opening is 44" wide x , swinging hammer style, includes blower and infeed belt conveyor, blower and belt are hyd powered, good working condition

Jeffery waste grinder, top feed opening is 27" x 33", swinging hammer style, bottom discharge, working condition

Komptech Terminator Shredder Approx 3700 Hours

LAMB 23x27 inch opening grinder with 150 HP motor, 1 3/8” screen and starter control. 460 volt 3-phase

Leadermac /Cantek JF330 Profile Grinder New never used Maximum length of straight grind 12? Maximum length of profile grind 12? Maximum diameter of swing 12? Max. depth of profile with 140mm hub 1.6? Max. depth of profile with 110 mm hub 2? Grinding motor 3 HP Grinding wheel size 225 mm dia. x 60 mm bore Machine dimensions 41 x 44 x 59? Machine weight 1850 lbs