Equipment For Sale

WESTERN PNEUMATICS HEAVY DUTY FINGER JOINTER WITH THE FOLLOWING EQUIPMENT & FEATURES: -- Right & Left Shaper Section: Thickness Capacity: 3/4" - 2" maximum; Width Capacity: 1-1/2" - 8" maximum; Length Capacity: 5" min. - 36" maximum; -- (2) Scoring Saws with 7-1/2 HP - 3,600 RPM motors; -- (2) Trim Saws with 7-1/2 HP - 3,600 RPM motors; -- (2) Shaper Spindles are hydraulically powered; direct driven @ 3,600 RPM by -- (1) 60 HP Hydraulic Power Unit with (1) cartridge unit per spindle. Hydraulic conversion was performed during the first year of operation. -- Western's 2-1/2" wide feed chain with lugs on 9" centers; 15 HP variable speed drive with up to 120-lug per min feed speeds; with angle transfer conveyor, air bag pressure head with quick-change feature & brush hold-downs -- APQUIP Extrusion Type Glue Applicator complete with mixing system. Currently arranged for 3/8 finger joints including (4) 3/8" glue combs -- Manual Corner Transfer to the assembly section. (allows for inspection and rejection of blocks for poor joint quality, missing proper glue spread, etc. prior to going into assembled boards) -- 12' Pre-Assembly Infeed Conveyor with feed speed ramp up/down; with side alignment rolls and dual top and bottom pre-assembly rolls -- Flying Cutoff Saw operating from below -- Assembly Press: 20' board capacity with hydraulically powered press -- Automatic Cycling Assembly Section: Feed speed varies automatically from 50 to 200 FPM, depending on incoming block lengths. Boards advance through the Cutoff Saw to a moveable limit switch where they are cut to length with a bottom-mounted 7-1/2 HP Flying Cutoff Saw arranged for continuous non-stop assembly. The cut to length board drops down into the squeeze chamber while the next board feeds out and above the preceding board where it is cut to length. Pressed lengths are pushed out onto material outfeed arms by the following board

1987 Western Star Log Truck Rebuilt Cat 3406B 13 speed Rear tires at 80%, fronts at 60% Barko 80 loader Using daily

1997 Western Star Sleeper Truck 150k miles on rebuilt Cat C15 475hp 13 speed Air ride Dual wetline New rubber Road ready Retiring

2007 Western Star 4900FA – 2 Units Available - $19,000 Each -800,000 And 879,000 Miles -Almost New Virgin Tires. -Several New Parts Including, Frame Shocks, Cab, Shocks, Frame Airbags, Cab Airbags, Muffler, Filters, Batteries And More! -Used Daily In A Fleet Until The Business Was Sold.

2006 Western Star 4900 Log Truck, Cat Engine, Barko 80XLE Loader only a few years old. Clean good running truck.

2016 Western Star Glider -390,000 miles -C15 -18 Speed -2124 Prentice Loader Tons of extras with truck -8 drives 2 tag and 2 steer tires -1 front axle -2 full rear axles -2 air cleaners that are extras

2016 WESTERN STAR 4900SF SEMI 405,250 MILES DETROIT 600HP 18 SPEED 46K REARS 13.5 FRONT AXEL 2 LINE WET SYSTEM HEADACHE RACK RECENT REAR END GOOD BRAKES AND TIRES 1 OWNER FLEET MAINTAINED FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

This 2018 Western Star 4700 is powered by a DD13 Detroit engine with an Allison automatic transmission, and 40,000 lbs rear ends. It has 11r24.5 tires on it. The truck has 521,866 miles. The truck is work ready, extremely well taken care of, and not one problem at all. If interested in this truck call Gavin 601/394/7796 Tim 251/366/3237 Kameron 251/242/5493 The truck is located in State Line, Mississippi, 467 St Peter St, 39362

2019 Western Star 4700 SB Grapple saw truck -34,000 miles -Copma 450 knuckle boom crane reach of 106’ straight vertical -Comes with sg160 and sg280 Mecanil saw heads -Have extra bars and chains for each -Up to date annual boom inspection and also dot inspection

Western Star Log Truck, CAT motor, 7000 Hood Loader, $80,000

2022 Western Star 4700SB Grapple Saw Truck -10000 miles -470 Horse DD13 Engine With an Allison Auto Transmission -Copma 650 Crane with 112Ft Vertical Reach -Mecanil SG280 Grapplesaw with 25" Bar -Has its own platform to mount with yard mat space beneath -Extra Large Utility Boxes with locks -Electric and Air Brakes for trailers Truck is loaded and like new!!!! -Pintle Hitch mounted and Extra Receiver Hitch

2012 western Star Log Truck Prentice 2124 loader Cummins Def deleted Recent radiator 18 speed True mileage around high 300k tac shows in the 600k Can use hour meter to figure out close true mileage Fresh fluids and rear ends checked Work ready Now using landing loader and no longer need truck

The STURTEVAT Westinghouse Industrial Blower is a robust piece of equipment designed for applications requiring effective air movement, such as handling dust and wood chips. It features a 6-paddle unit with a 48-inch diameter and 16-inch inlets and outlets, ensuring efficient air processing. This particular model, size 717 with Style W63694, is powered by a 20 HP, 3-phase electric motor, providing reliable performance for industrial environments. This blower is in good working condition, making it a cost-effective solution for industrial facilities looking to improve their air handling capabilities. Its durable construction and thoughtful design cater to high-demand scenarios, ensuring longevity and consistent operation. Ideal for factories or workshops, this blower represents a balance of power and efficiency tailored to industrial needs.

Model: VMX Series, starter for 150 hp motor, working condition

The 30" Whirl-Wind blower is a highly efficient piece of industrial equipment, ideal for a variety of applications that require robust airflow. It features a 10" inlet and an 8" outlet, facilitating optimal air movement and ensuring effective performance in demanding environments. Despite being used, this blower is in excellent condition, with minimal signs of wear, closely resembling a new unit. This blower is designed for those who need reliable performance. Its durable construction and efficient design make it suitable for both small and large-scale operations. With the reputation of the Whirl-Wind brand, you can trust in the long-lasting, dependable nature of this blower. Well-suited for environments needing strong airflow, this used blower is a practical choice for businesses looking for cost-effective yet dependable equipment. Its condition assures potential buyers of its operational integrity and wide applicability.

Brand New Whirlwind blowers in stock, 8" -14" inlet, AR-400 steel and Dodge bearings, heavy duty built, call with your needs

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i61 WHIRLWIND 1000 L Upcut Saw Specifications: 2-3/16" x 8-1/4" Cap., 14" blade cap., 3,450 RPM, left-hand unit feeding from right-to-left, 5 HP BALDOR motor. Complete with: (5 - 90) Cycles/Min; magnetic starter with low voltage controls, air filter, regulator, coalescing filter, and 4" dust chute. NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

Whirlwind Undercut Saw with Tiger Stop Fence

Whirlwind Sawdust Blower 36" fan 8 paddle fan 18" inlet reduced down to 17" 16" outlet

Whirlwind Chop Saw Model 1000 5 HP Right to Left hand 5 available