Equipment For Sale

The “Twin NXL” is a heavy-duty double head notcher designed to fill the gap between today's entry-level single head pneumatic notchers and high-end, expensive, auto-feed double head notchers. Notch new or recycled material or even 6" wide cants.

2023 Go Fast 6x12 Resaw Has minimal use

UpSTAK Board Stacker machine for sale. Includes unscrambler, 7.5HP Motor, 15 layers per minute package, 7' Outfeed, and HMI controls. CLICK ON VIDEO TO SEE MACHINE UP CLOSE.

Machine Details: • (2) 10” Diameter Steel Brushes (Side Sweeping), 3/8" – 2.5" Tall • (2) 6-1/4” Wide • 18” Minimum Length Capacity • Self-contained 5 GPM System • 10-Gallon Hydraulic Fluid Reservoir • Variable Belt Speed: 0–700 FPM • Machined Eccentric Press Cam Board Knocker • Adjustable Feed Belt Height: 27”–36” • Exit Pinch Roller Height: 34” • 5 HP Motor (230V 1PH / 60Hz TEFC) • Includes motor starters with start/stop buttons and circuit overload protection • 13.4 FLA • Dimensions: 90” L x 29” W x 59” H • Weight: 1,400 lbs

Go-Fast double end trim saw, electric drive, 4" x 8' capacity, good working condition

GoFast 2-Head Resaw 10 HP main motors Go Fast Board Deduster

TWIN NXL Pneumatic Notcher - (2) 12” Diameter X 9” Wide Index-able Notching Heads - 0"- 2-1/2" Tall Notch Capacity - Up to 6” Material Width, 4” Material Height (Other Heights Available), Up to 112” Material Length (longer available) - Production: Up to 1750 Stringers Per Hour - Center boot quick adjust from 14” to 18” Wide via Hand Crank - Center boot adjustable from 10" to 22" Wide via with additional setup - Can optionally be used as a single head notcher for other center boot widths - Dual 2" Bore Tie Rod Air Cylinders for Clamps & Table - Heavy Duty 3/8” Thick Steel Table Top - Twin Top Clamps - 1-1/4" Linear Bearing Slide Assemblies - Air System Includes: Dual Hand Safety Controls, Lockout Valve, and Regulator - Operating Height: 37” - Dimensions: 120” L, 60” W, 51” H - Approx. Weight: 2650 lbs - (2) 20 HP Arbor Motors (230/480/3/60 TEFC) - Completely Pre-wired for 230V, Motor Starters with Start/ Stop Buttons and Circuit Overload Protection - Panel Face Mounted Rotary Disconnect - Panel Location: Lower Left Side - 96 FLA Will need dust chutes if not using with waste conveyor

6x8 Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 20” Band Wheels - Air Tensioned Blade Mechanism -1" Blade - 15 HP Motor (230/480/3/60 TEFC) - Completely Prewired for 480V - 18.1 FLA

15 HP Motor | ~2017 | 6x6 capacity

New April 2024 - Very low use Go Fast board deduster w/ side brushes, debur and board knocker, D3 Series 6" wide 1/4 - 2 1/2" thick boards, 5 HP 480 V (3) phase, 5 HP variable feed hydraulic self-contained, So new packing slip still attached, Ref #204, Contact Jackie Kittrell 931-698-3342

Board Deduster

10HP Notchers available with 3 phase or single phase motors. Great for notching NEW wood stringers. The design is compact, low maintenance, and easy to operate. Notches up to 72" long material, extension kits are available. Profile Technology cutting heads. Units are typically in-stock. Manufactured in New London, WI. Dust Collection is recommended, but not required.

- (2) 10” Diameter Steel Brushes (Side Sweeping) - 3/8- 2.5" Tall, 2- 6-1/4” Wide, 18” Minimum Length Capacity - Self Contained 5 GPM System - 10 Gallon Hydraulic Fluid Reservoir - Variable Belt Speed 0-700 FPM - Machined Eccentric Press Cam Board Knocker - Adjustable Feed Belt Height: 27”- 36” - Exit Pinch Roller Height: 34” - 5 HP Motor (230/480/3/60 TEFC) - Completely Pre-wired for 230V, Motor Starters with Start/ Stop Buttons and Circuit Overload Protection - 13.4 FLA -Dimensions: 90” L, 29” W, 59” H - Weight: 1400 lbs

3 Head | 6x8 Resaw Model | 480V

Used NXL Notcher -230V 3PH -Dust Chutes -Standard Teeth NXL Pneumatic Notcher - 12” Diameter X 9” Wide Index-able Notching Heads - 0" - 2-1/2" Tall Notch Capacity - Up to 6” Material Width, 4” Material Height, Up to 60” Material Width (longer available) - Production: Up to 800 Stringers Per Hour - Top Hold Down Clamp - Dual 2" Bore Tie Rod Air Cylinders for Clamps & Table - Heavy Duty 3/8” Thick Steel Table Top - 1-1/4" Linear Bearing Slide Assemblies - Air System Includes: Dual Hand Safety Controls, Lockout Valve, and Regulator - Operating Height: 37” - Dimensions: 60” L, 90” W, 50” H - Weight: 2000 lbs

The Go Fast Firewood Wrapper is the only industrial duty firewood wrapper available on the market today. This machine can wrap a bundle in under 12 seconds, making it the perfect solution for banding firewood bundles. The wrap is tensioned by a standard nut that ensures tight bundles and maximum wrap usage. Our firewood wrappers are simply better by design and unlike other manufacturers, we use high speed farm duty motors along with lubed bathed gear boxes. This allows us to get a higher amount of torque from our energy efficient 1/3HP motor. These components have proven themselves to outlast the light-duty, low speed motors that are commonly found on other firewood wrappers.

Go Fast Resaw 15 HP Motor Put under power to test, never put into production.

PRICE REDUCED 6x6 Master Return Resaw - ¼” – 6” Tall Cut Height, 6” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Powered Belt Return w/ Adjustable Height Sheer Plate - Top Mounted Powered Tire Hold Down Wheel - Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min) - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 132” L, 96” W, 53” H - Approx. Weight: 1840 lbs 6x8 Slave Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Self- contained Hydraulic System Runs off First Saw - Easy Crank for Adjustable Blade Position - Top Mounted Powered Tire Hold Down Wheel - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 60” L, 90” W, 48” H - Approx. Weight: 1340 lbs Additional options included: -Air holdover -6” fence -1.25” blade and guides - (2) 15 HP Motors (230/480/3/60 TEFC) 2 HEAD Resaw Control Panel - 480V Line Voltage Location: Salem, MO

The Go Fast NXL Single Head Notcher is a compact, heavy duty, and SAFE machine for your notching needs. Notch new or recycled material or even 6” wide cants. A dual hand control check valve requires that the operator has both hands on the push buttons while the table is moving through the cutter. The cutter head is well guarded and never exposed to the operator. In addition to a front clamp, a top clamp is included to help hold the material down while it is being notched. Unfortunately many other notchers do not include this feature which results in you replacing more cutter tips and spending more money.

The Go Fast TS10 Trim Saw is a heavy duty and compact machine, perfect for trimming boards to size. The easy to use moveable length stops are quick to adjust and allow for multiple, simultaneous board sizes. SIMPLE, SAFE AND STURDY: The easy stop system makes it SIMPLE for the operator to cut boards to length. The operator can SAFELY cut boards without ever having to stand on the blade side of the machine or have their hands near rotating shafts and sprockets. STURDY is one thing Go Fast had in mind when making the TS10 Trimmers. Weighing approximately 1,600 LBS with 3X3 tubular framing, you can bet that these saws will be around for the long run!