Equipment For Sale

Fughum shaker screen/ cyclone, 7' x7' screen, 5' dia cyclone, working condition

5' X 5' screen, electric drive, very good working condition

8' x 8' screen, electric drive, good condition

8'X 8' screen, electric drive, working condition, CALL FOR REBUILDING OPTIONS

Fulghum 60" 6 Knife with 150HP Electric Motor

air exchange horizontal tank mount air compressor, (2) 15 HP dual compressor, Ref #204, Call 931-797-6284 New coupling and electrical switch repair ready to work. Dual Air compressor (2) 15 HP pumps

Furnas MCC Panel 800 Amp (14) Starters and Breakers

G & P - EPN, ... Pump Sander (Double-Sided), -- Double-end direct-drive pneumatic Drum Sander. -- 2 HP Motor - 3,600 RPM motor speed. -- (2) 1-1/4" Dia. x 10" long shafts.

G-Tek Band Resaw with 12"x12" Capacity, 40hp Motor s/n: 84.124.0804.27.C.0.B.0.0.1.1.36 model: Runaround

G-Tek Band Resaw with 12"x12" Capacity, 40hp Motor s/n: 84.124.0804.27.C.0.B.0.0.1.1.36 model: Runaround

G Tek Grade Runaround Band Resaw with Complete Runaround System

G Tek Single Head Grade Band Resaw With Complete Run Around System, Cab and Set works, 5 Way Seperator. Just about the Same as a Brewco B-1600. Additional Pictures available on Request

New Galvanized or painted 47’ 3 Axle 5 Bunk Log Trailer All Alum. Wheels, Front and Rear Axles Lift, 30k Axles and Suspension, LED Lights - Lighter and Stronger!

New Crib & Rail Pup Trailers Lightweight, high strength 130ksi beams. Rail or Crib style available

Complete 5 Bunk Kit with easily removable Aluminum Stakes and End Gates for Flatbed or Rail Trailers Kit includes: 10 Galvanized Bunk Bottoms, (20) Alum. 8’ Stakes, Alum, Front and Rear Gates, Mounting Kit, $7,750 Galvanized Bunk Bottom w/(2) 8’ Aluminum Stakes and Hardware $620 Alum. Stake 8’6..........$145

Complete Truck Rack Bunk System Kit 4 Galv Bottoms w/Up To 9’ Alum Stakes, Winches, Alum Front Rack Up To 9’ Tall, Galv Low Grapple Carrier, 2 8’ Alum Grapple Guards for in Between Bunks. Includes Mounting Lighter and Stronger!

CUSTOM LOG BUNKS FOR TRUCKS AND TRAILERS - GALVANIZED STEEL BOTTOM WITH TWO ALUMINUM STAKES - Lighter and Stronger!

LOG BUNKS - GALVANIZED STEEL BOTTOM WITH ALUMINUM STAKES - EASY TO INSTALL - Lighter and Stronger!

GANNOMAT INDEX 280 TREND CNC BORE, GLUE & DOWEL INSERTER: -- Specifications:CNC Controlled horizontal Point-to-Point Drilling, Gluing & Dowel Inserting Work Center for absolute, incremental, variable (parametric) programming of boring patterns. -- Working Field(4) Independent zones for individual processing of (1 - 4) pieces. Pneumatically activated Stop system (side fences) consisting of: Right-hand, left-hand, and center stop. Max. single part Length 2,800 mm (110"). As a 2-zone: LH & RH is 1,400 mm (55") each part. As a 4-zone with center fence: LH/RH is 700 mm (27.5") each part.Min/Max. Material Thickness 0.50" - 3.125" "X" Axis Positioning Speed 246 FPM (75 MPM) and driven by rack & pinion for fast acceleration/deceleration of working unit. "Y" Axis is set by mechanical digital counters. "Z" Axis is NC controlled height adjustment for boring/inserting units. -- Hold-down Clamps:Total of (10) pneumatic, "quick change" Hold-down Clamps. -- Dowel driving & horizontal boring:Integrated into (1) station; the Dowel Driving Unit is located alongside the Boring Station; both units are mounted on (1) support. -- Horizontal Drilling Spindle:Can be setup for 6 - 8 or 10 mm; dowel length from 25 - 50 mm. -- Doweling Station includes:Vibrating hopper with: (1) Single drop device and (1) outlet tube; insertion head & dowel driving with air impulse.Mechanical dowel diameter & dowel length control prevents the insertion of any oversized dowels. -- Glue Valve/Amount:Controlled via software and can be adjusted by milliseconds; (2) standard separate stainless steel 1.5 gal. pressurized tanks (one for glue, one for water to clean/purge the glue tubes. -- Operator Interface:GANNOMAT + BECKHOFF "C3640 Twincat" PLC Operating System.15" Touch-Screen color monitor; network card (for online operation); serial, parallel, USB ports. -- Actual model is: GANNOMAT INDEX 280 TREND. NOTE: Machine is currently setup for 8 mm dia. x 35 mm long dowels.

GANNOMAT - CONCEPT 70/170 EASY: Case Clamp (Semiautomatic)Specifications: Solid platen Case Clamp specially designed to save space; time & labor in all production situations.Whether your only Clamp or a 2nd Clamp, "Easy 70" is a faster cabinet assembly production Clamp.Features -- Minimal floor space required; length: 79"; width: 32"; height: 82.6". -- Pressing force exerted along the horizontal axis of the dowel joint by the side pressure beam. -- Continuous working surfaces: Fixed sidewall & side pressure beam; eliminates setup time for carcasses with: Fixed shelves, stretcher rails, etc., and small carcasses like drawer boxes.Working Capacity -- Min. clamping width: 6";; max. clamping width: 51.2";; max. clamping height: 66.9". Equipped with: -- Adjustable Clamping cycle time w/auto. opening. -- Simple operation by directional push buttons. -- Potentiometer for stepless adjustable pressing force. -- (3) Pressing velocities & adjustment rates: 5, 10, & 25 MPS (with fine positioning or creep feed). Actual Model: GANNOMAT - CONCEPT 70/170 EASY