Equipment For Sale

MULTICAM 3000 SERIES 3-103-R 4 X 8 with ATC:50" x 100" Fixed table, moving gantry machine in a front-to-back configuration with a multi-zone vacuum table supported by a 16.9 HP vacuum system . -- Equipped with:(1) 13.4 HP HSD Routing HSK spindle, variable speed by inverter up to 23,000 RPM with 6-position rear mount tool changer.. -- Full table coverage:On X- & Y-axis, rack & pinion gantry drive with brushless Servo motors using integrated 25 mm linear roller bearing rack system, 6" Z-axis travel via lead screw drive; 1,400 IPM max. cutting feed, 2,500 IPM max. rapid traverse rate on X- & Y-axis. -- Control:The MULTICAM CNC controller is a stand-alone RISC/DSP system. The controller includes a keypad interface with hot keys for repetitious functions and DNC access to host computer. Memory for instant job replay, 32-bit processor, 12 MB RAM & 2 MB flash memory, interprets HPGL and M & G codes, RS-232 interface for PC communication. -- Complete with:16.9 HP vacuum pump, assorted tool holders, PC and manuals.

MULTICAM 3000 SERIES 3-204-R, 5' X 10' TABLE WITH ATC SPINDLE AND BORING BLOCK60" x 120" Fixed table, moving gantry machine in a front-to-back configuration with ATC, boring and multi-zone vacuum table.Equipped with: 10 HP "HSK" automatic tool change spindle, variable speed by inverter up to 24,000 RPM. 8 position tool rack 4 spindle drill block in long axis direction Full table coverage on X- & Y-axis Rack & pinion gantry drive with brushless Servo motors using integrated 25 mm linear roller bearing rack system 8" Z-axis travel via lead screw drive. 1,000 IPM Max. cutting feed, 1,700 IPM max. rapid traverse rate on X- & Y-axis.Control: MULTICAM CNC controller Is a stand-alone RISC/DSP system. Controller includes a keypad interface with hot keys for repetitious functions and DNC access to host computer. Memory for instant job replay, 32-bit processor, 12 MB RAM & 2 MB flash memory, interprets HPGL and M & G codes. RS-232 interface for PC communication. Includes: Assorted collets and tool-holders.

MULTIQUIP GENERATO MODEL DH-04801 45KW GENERATOR IS ON A 2004 DUOLIFT TRAILER WITH ON BOARD FUEL TANK LOW VERY QUIET GENERATOR

(2) Saws sold as a pair Used for ripping 48" plywood and wafer board Saws can be adjusted anywhere on the shaft. Single Phase motors and variable speed drive motor, 2hp on main shaft.

2015 Multitek 2040XP2 Firewood Processor Cab Circular saw 8 way, 10 way, and block wedges Incline conveyor 9800 hours Using daily

Multitask 2040XP Firewood Processor John Deere 125 HP Diesel Shuttle Grapple 30' Conveyor 60" Carbide tipped circle saw (new teeth) 6 & 8 Way wedges 4-Leg live deck Max log length 40' Max log diameter 23" 35 Ton Splitter

4.5 - 7 Cords per hour 100 HP Electric drive 40’ max log length 23” max log diameter 60” circular saw 16-way splitter head cab with joystick controls numerous spare parts Infeed and outfeed included

4.5 - 7 Cords per hour 100 HP electric drive 40’ max log length 23” max log diameter 60” circular saw 16-way splitter head cab with joystick controls Numerous spare parts infeed and outfeed included

2018 Multitek 2040XP2 Firewood Processor 2500 hours Circular saw 30' conveyor Stock image. Photos coming soon

Multitek 40KW Generators: 40KW 3-phase 240 volt generators (8 available). All have approximately 27 hours of testing. These are new units available for $16,000 each.

MULTITEK - TRC 460, ...Rim Crusher: ...Less than (300) Hours!Features & Specifications:• Tough MULTITEK® products; simple and strong. Truck Rim Crusher makes wheel salvage easier. • Powered by: Fuel-efficient 25 HP liquid-cooled diesel engine with operator instrument panel control.• The powerful MULTITEK built 6" (15.2 cm) diameter hydraulic cylinder features a Heavy-Duty aluminum piston for continuous duty cycle application.• Power-assisted hydraulic wheel lift arm means less work to load heavy truck wheels.• Powerful 70,000 Lbs (31,752 kG) of crushing force.• Simple: Minimal training and maintenance required.• Standard 2"; ball hitch.• Dimensions: 80" (203 cm) W x 171" (434 cm) L; weight: 3,400 Lbs (1,542 kG).• Engine: Liquid-cooled Diesel with electric start.• Cycle Time: (35) Seconds.

New John Deere motor New clutch New blower motor Grapple support strengthened Most hoses replaced 4-way - 10-way - 12-way splitters 24 foot American conveyor working daily and available for inspection.

Electric 3 phase unit Still being uased has a 16 way box wedge Has 3,700 hours heat and AC work. Machine is very clean Does not come with a discharge conveyor.

2022 Multitek 2040 XP-2 Firewood Processor, John Deere 125 Turbo Engine, 2,500 Original Hours, Enclosed Cab with Heat and AC, One Owner, Tip Tray, 30' Conveyor, Live Strand Deck, Ready for Work. Weight 15,500 lb Width 8' Length 30' Height 10' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 2025LDCS 1560hrs 2nd tip out pan Upgraded John Deere engine (94hp) 5” ram upgrade Extra drive chain on infeed 30’ foot chain conveyor 10 way wedge Laser option

MURPHY-RODGERS HEC-216-S/10 33,000 CFM Continuous Duty Automatic Self-Cleaning Pulse Jet Baghouse Dust Collector Equipped with: (216) 5" Dia. x 10' L Cloth filter bags for a total of 2,827 sq/ff. of filter area. (2) 42-1/2" W x 68" H & (2) 40-1/2" x 68" H Top access doors. (3) Front & (2) side 27" W x 54" H Filter access doors. (2) Square cone bottom hoppers, Each with, 25" x 25" Discharge openings. System utilizes (2) 4-1/2’ x 6’ x 4’ H Waste containers (NOT included). CHICAGO 100 HP - 1,780 RPM Roof-mounted blower, with 41” Dia. inlet. Motorized dampers for winter & summer modes. Winter mode: Directs air back into building, reducing heat loss. Summer mode: Directs air outside, cooling building. Electrical controls (as pictured). Complete with: Spare Filter Bags. NOTE: Installed Used in 2016 with "New" 100 HP motor, new bearings in blower & "New" spring mounts. NOTE: Variable Frequency Drive needs to be replaced. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

MURPHY-RODGERS MRZ 17/16L Interior/Open 6 Bag Dust Collector with Auger and Rotary Air Lock General specs: Approx. 7,600 CFM @ 8" SP. (6) top filter bags @ 24" dia. by 72" long. (6) bottom disposable plastic dust storage bags. -- Fan/Motor: 25 HP BALDOR TEFC motor direct driven fan with electrical starter. 17" diameter inlet, with lifting hooks. The bag collector motor is brand new and has never been powered on or fired up. -- Comes with: Main approx. 17" dia trunk line, shut-off, and Quick clamp removal for filter and plastic bags. -- All steel construction with rugged support legs. Air Deflectors allows operator to adjust the air flow and amount of waste evenly into the 6 waste bags. -- Note: NFPA 664 (Fire Code) states that a max. of 5,000 CFM is limit allowed for indoor enclosure-less dust collectors.

MURPHY-RODGERS - HEC-216-S/10: 33,000 CFM Continuous Duty Automatic Self-Cleaning Pulse Jet Baghouse Dust CollectorEquipped with: -- (216) 5" Dia. x 10' L Cloth filter bags for a total of: 2,827 sq/ff. of filter area. -- (2) 42-1/2" W x 68" H & (2) 40-1/2" x 68" H Top access doors. -- (3) Front & (2) side 27" W x 54" H Filter access doors. -- (2) Square cone bottom hoppers each with: 25" x 25" Discharge openings. -- System utilizes: (2) 4-1/2’ x 6’ x 4’ H Waste containers (NOT included). -- CHICAGO 100 HP - 1,780 RPM Roof Mounted Blower with: 41"; Dia. inlet. -- Motorized dampers for winter & summer modes. -- Winter mode: Directs air back into building, reducing heat loss. -- Summer mode: Directs air outside, cooling building. -- Electrical controls (as pictured). VFD needs to be repaired or replaced.Complete with: -- Spare Filter Bags.NOTE: Installed Used in 2016 with "New" 100 HP motor, new bearings in blower & "New" spring mounts.

MURPHY-RODGERS - MRSE-14-RAL: Baghouse Dust CollectorSpecifications: 14" Inlet dia.; 4,836 CFM; (63) bags with: 520 Sq./ft. filter area; 9.3:1 air-to-cloth ratio; 20 HP fan motor; primary separator built into unit; secondary separation of fine particles by filter bag section; -- Equipped with: -- Rotary Air Lock. -- Fully automatic shaker controls with: Electric shaker as standard; consists of panel box with shaker starter; transformer for 115 V circuitry; solid-state timer for fan deceleration & shaking cycle. -- All necessary relays and internal wiring inside the panel box.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5y 15 HP Fan motor, free-standing interior/exterior unit rated @ 3,900 CFM. Equipped with: (48) Filter bags having a total of 352 sq. ft. of cloth filter area in a fabricated steel enclosure; 12" dia. inlet. Magnetic starter; rotary air lock, estimated weight: 3,500 Lbs. Unit stands 13.5' tall when fully assembled, but with the legs and muffler removed, it can easily be transported on an open 5'x10' trailer. Machine State: Still in place, but disconnected NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.