Equipment For Sale

2024 John Deere 2654G Processor -800 hours -Waratah 623C head -36" triple grouser pads Like New!!!!

Transmission for JD 848G, $5000.

JD 848G/660D Cooling package $2500.

ENCLOSED CAB, SMOOTH BUCKET, JOYSTICKS

Reman John Deere 6068T Mechanical Engine

Pitts carrier, CSI 264 Ultra delimber

2016 Deere 948L Dual Arch Skidder, Engine has ONLY 6000 Original Hours, Enclosed Cab with Heat and Air Conditioning, New Tire Chains around 35.5 Tires, Center Section is Tight. Operating Weight 49,418.9 lb Overall Length 333.4 in Overall Width 140.7 in Height Over Cab 136 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 John Deere 1910 -Complete Deere engine has 13,000 hrs -27,000 frame hours -Pumps have 7,000 hrs -Drive motor has 7,000 hrs -New Deere transmission has 7000hrs -Slew bearing and brass has 9000hrs -All cylinders except for one steer cylinder replaced in the last 5000hrs -Extension boom replaced and bucket replaced -Newer front window -A/C and heat work good -7 new Nokian tires in the last 4500hrs tires range from 80-99% -Boogies diffs and planetaries drain clean

2006 John Deere 548G3 -12k hours -New glass -Tires have less than 500 hours -Tight and dry -Has a set of good chains -Have a brand-new set will sell for an additional Cost Turn-key Unit!!!!

2007 John Deere 2054 Harvester with Waratah 622B Head, 17,768 hours, Recent pump, Recent sprocket and rails, New Waratah computer, runs great. Weight 69,187 lbs Length 45 ft 0 in Width 11 ft 10 in Height 10 ft 10 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

JOHN DEERE 324K Compact Wheel LoaderProductive for tight turns and extra agility in close quarters.Specifications: -- Engine Power: 70 HP -- Engine type: YANMAR Diesel -- Full-turn tipping load: 9,766 Lbs -- Bucket capacity range: 1.4–2.0 cu. yd -- Bucket breakout force: 2,364 Lbs -- Operating weight: 14,087 Lbs

2013 Deere 3754 With Waratah 625 Processor, Cab has Heat and AC, Frame Hours 14,000, New Long Block with Low Hours Undercarriage is 80%,One Owner, Ready for the Woods. Weight: 101,651 lbs Length: 32 ft 4 in Width: 11 ft 0 in Height: 9 ft 7 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 John Deere 892D-LC Excavator with 8444 hours, Thumb, The oil cooler needs some work. Weight: 65,983 lbs Length: 36.17 ft Height: 11.17 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Deere 548G-3 Grapple Skidder, Has Winch, 14,700 Hours, Well Maintained, Tires are 28L x 26, Good Tread, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 23,690 lb Overall Length 20.77in Overall Width 9.51ft in Height To Top Of Cab 9.88ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Deere 1910E Forwarder, Strong Engine, Has 27,000 Frame Hours, Motor Replaced at 13,000 Hours, Pumps at 7,000 Hours, Drive Motors replaced at 7,000 Hours for Preventative Measures, Slew Bearings and Brass replaced at 9,000 Hours, All Cylinders except Steering Cylinders Replaced at 5,000 Hours ago, Extension Boom and Bucket Replaced Newer Front Window Replaced, New Bucket, Good AC and Heat in Cab.7 New Nokian Tires Replaced the last 4.500 Hours, Boggies, Differential and Planetaries drain clean. Weight - 48,060 lb Length - 35' Height - 12.8' Width - 10.15' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Deere 703G Feller Buncher, Equipped with a FS 20 Cutter Saw Head, Enclosed Cab with Heat and AC Engine was rebuilt around 3,000 Hours ago, 15,000 Frame Hours Undercarriage is 75%, Hi/ Low Range needs some work Ready for the Woods. Weight: 45,325 lbs Length: 13' 7" Width: 10' 7" Height: 11'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

John Maye D-53 Semi Automatic Strapping Machine S/N 84763

JOHNSON LOOSE BAGGING SYSTEMOne Set of (2) Loose Fill Bagging Systems -- Was Bagging Wood Chips in Plastic Bags. -- One Hopper receiving System for the (2) Units -- Two feeding systems -- Complete with Support Legs and Bag Conveyor -- Output Finish Bag Conveyors -- One Unit is Brand New and the Other is in Very Good Working Condition -- Production Rate 6 to 10 Bags Per Minute. -- Could Bag any Type of Free Flowing Material.Price is Loaded on your Truck.

(2)Jones Superior Machine No 54T Band Saws

50 HP Jordan Dual Shaft Shredder with Infeed Conveyor --Overall Length 141" --Overall Width 56" --Overall Height 98" --Cutting Chamber Size 42"x20" --Hopper Size 1.5 - 2 Cubic Yard --Cutter Assembly Height 13.5" --Motor Horsepower 50HP --Approx Chamber Weight 4570 Lbs --The MS-4220 is our most popular mid range shredder, with the power to handle your tougher jobs and a cost that can fit into your demanding budget. The MS-4220 can be used to shred paper, plastic, passenger tires, carpet and an many other materials. It is designed with counter rotating dual speed shafts and the cutting group continuously changes knife tip position. This helps the knives grab and pull through hard to hold materials. The MS-4220 Industrial Shredder offers mid size chamber capacity and the horse power to handle many of the most demanding applications. For a cost effective shredder, this unit can’t be beat for volume reduction and material shredding. The MS-4220 Industrial Shredder is a work horse.