Equipment For Sale

--In Auctions; https://exfactoryauctions.com/Detail/DL-230113/event/A122024$1 - NO RESERVE -- TYLER French-Type Dovetail Machine Equipped with: (2) 14-1/2” x 17” Tables. (2) 2 HP Routing heads for mounting of drawer sides. (1) 2 HP Grooving head for drawer bottom dado, (2) 2-Spindle Vertical boring heads for drawer hardware. (2) Pneumatic hold-down clamps

40? deep X 87.5? wide capacity. The Maximum opening is 49.5? and the pods will extend 9.5? for a minimum opening of 40?. The press is rated to 100 PSI and has (1) pod short of 100% pod coverage. That being the center bags are staggered. There are spring loaded bed rollers to aid in loading and unloading. The top and bottom plates are dent free and no air leaks This fully functional machine has been fully cleaned and checked and is ready to work..

TYLER 703 Power Pod Cold PressTyler Air Pod Press with a Platen dimension of 40″ Wide X 87-1/2" Long. -- The Maximum Daylight Opening is 49.5″, and the pods will extend 9.5″ for a minimum opening of 40″. -- The top and bottom plates are dent free. -- The press is rated to 100 PSI and has (1) pod short of 100% pod coverage (being that the center bags are staggered). -- There are spring loaded bed rollers to aid in loading and unloading. .This machine has been cleaned and checked and there are no air leaks.

Tyler Kerfsaver XL Resaw 1-1/4" Blades 36" Diameter Bandwheels Includes: Feed system that can tilt to mill tapered siding

TYLER - 2400: Slat-Wall Machine -- SpecificationsProduces T-slots "Slat-Wall" for architectural/store fixture panels.48" x 97" Max. panel capacity., 24" x 24" min. cap., panel thickness 1/2" to 1-1/2". Machine capable of processing up to (40) panels/Hr; depending on material density, thickness, and the slot profile. -- Equipped with:Machine is currently setup with: (18) Router spindles on 3" centers.Spindles are driven in groups of (3) with: (6) 7-1/2 HP - 3,450 RPM Motors that drive the (18) router spindles; all router spindles rotate @ 15,400 RPM.Machine can accept up to (21) router spindles & the additional spindles can be activated by adding (1) additional 7-1/2 HP - 3,450 RPM motor. -- Machine Operating SequencePanels remain stationary on top, pneumatically clamped in place while the bottom mounted router bank traverses the full length of the panel with a high-speed return,Variable feed speed control, router assembly traverses on ground & polished rails with chain drive.Panels are positioned along the 8' rear edge fence line; distance from the panel edge to the centerline of the 1st cut can be adjusted from 0.0" - 3" (1 router spindle pitch). -- Operator & Machine ControlALLEN-BRADLEY Electrical controls for the machine cycle; "setup" mode of operation.Machine cutting cycle is initiated by: 2-Hand Operator safety buttons located on the right front of machine. -- Complete with:Overhead holddown assembly with: (2) Large air cylinders; (6) arms with spring loaded clamping pads hold the panel in place.Panels are loaded from the 8' front and exit to the side for easy unloading. -- Options Include: Assortment of used "Diamond Tooling" (diamond router bits) Assortment of extra motors Spare parts Service manual & docs. -- Actual Model: TYLER 2400

HMC HD 40

Tyrone Berry 50’ (2) Shotgun Drive Cylinders

Tyrone SMA-270, 125hp electric drive, includes hyd unit and cable drum, good condition

75hp electric, double pilot pump, directional valve

213 Tyrone-Berry Feed

Tyrone-Berry Carriage Feed Drive SMA-225 60-hp Electric Motor Included

Tyrone Berry 60hp model 220 carriage drive, includes drum package with cable, includes spare pumps

213 Tyrone Berry Carriage Drive w/cable

30HP 213 Tyrone-Berry Feedworks

Tyrone Berry 215 Carriage Drive w/Drum Pkg, 60 HP Elec Mtr, Ctrl Valve in Cab

Tyron Berry SMA 213

Tyron Berry SMA 213

Tyron-Berry SMA 215 Carriage Drive with Drum & Cable S/N 27440

Tyrone Berry SMA 215 Carriage drive

Tyrone-Berry SMA 215