Equipment For Sale

FRUILMAC RANDOMAT E - End Matcher; --÷For End Matching flooring or cabinet & entry door rails or tongue and groove. The feed-thru system allows continuous feeding of random length parts with any kind of profile.÷Capacity & Description: --÷ Width cap. 1-3/16" x 9-7/8'; length cap. 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. -- -- Approx. (10) cycles/Min depending on part length & width; --÷ Feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors. --÷ Positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. --÷ Parts are conveyed past the 1st & 2nd shaper head, automatically reversed and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time the 1st shaper head would be coping the 1st end of another part. --Equipped with: -- -- Twin 7.5 HP - 7,500 RPM high-speed shaper motors which pneumatically traverse in tandem for each cutting cycle. -- -- Cutting station with overhead hold-down wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps. --Controller & Operator Interface: Key Pad SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation, variable feed speed conveyor line, and shaper head advance with LED readout on the controls. --÷Includes Infeed and Outfeed Conveyors

FRUILMAC RANDOMAT E - End Matcher; --÷For End Matching flooring or cabinet & entry door rails or tongue and groove. The feed-thru system allows continuous feeding of random length parts with any kind of profile.÷Capacity & Description: --÷ Width cap. 1-3/16" x 9-7/8'; length cap. 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. -- -- Approx. (10) cycles/Min depending on part length & width; --÷ Feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors. --÷ Positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. --÷ Parts are conveyed past the 1st & 2nd shaper head, automatically reversed and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time the 1st shaper head would be coping the 1st end of another part. --Equipped with: -- -- Twin 7.5 HP - 7,500 RPM high-speed shaper motors which pneumatically traverse in tandem for each cutting cycle. -- -- Cutting station with overhead hold-down wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps. --Controller & Operator Interface: Key Pad SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation, variable feed speed conveyor line, and shaper head advance with LED readout on the controls. --÷Includes Infeed and Outfeed Conveyors

FRIULMAC - Dual-Feed, ...Double End Cut-Off SawFor squaring workpieces and for transportation to a Planer or Moulder with a straightening table.Specifications: -- 79" Max. (2,000 mm) opening from Saw to Saw. Motorized opening with LED readout on the control panel; left-hand fixed with left-hand fence line. -- Hopper Magazine - material capacity: Min. length: 7.87" (200 mm), max.: 79" (2,000 mm); width: 1-1/8" (30 mm) to 6-3/4" (170 mm); and thickness: 0.59" (15 mm) min. up to 2-3/8" (60 mm) max.; hopper stack height: 23-1/2" (600 mm).Each side is equipped with: -- (2) Trim saw motors, 5.36 HP each; saw blade dia. 9.84" (250 mm). -- Hydraulic feed drive unit: 4 HP (3 kW) motor. -- Trimming & throughput capacity: Up to (55) pieces/Min.NOTE: Voltage transformer for 600 Volts available with the machine

FRIULMAC Quadramat Single End TenonerSingle end tenoner with (4) heads with Jump cope, cope, disc sanding and disc sandingSpecifications: -- Workpiece Length: 125 - 1500mm -- Workpiece Width: 125-1500mm -- Workpiece Thickness: 13 - 40mm -- Configuration: Jump-Cope, Cope, Wheel-Sanding, Wheel-Sanding -- First Station: 7.4 HP Jump-Cope/Profiling Unit with 40mm Diameter Shaft, 6000 RPM Rotation -- Second Station: 7.4 HP Cope/Profiling with 40mm Diameter Shaft, 6000 RPM Rotation -- Thirds Station: 4.7 HP Sanding Wheel -- Fourth Station: 4.7 HP Sanding Wheel -- Variable Speed Control of Sanding Stations from 750 - 1400 RPM -- Feed Speed: 13 - 98 FPM

FRIULMAC Quadramat Double End Tenoner:This machine is set up with (4) four profiling units left and right for a total of (8) eight -- 1,500 mm (59") Max. x 95 mm (3.7") min. opening -- Loading space 1,041 mm (41") -- Thickness 10 - 100 mm (0.4" to 3.9")Equipped With: -- Hogging/ Trim - Hogging/trim - Jump cope - Cope. -- Motorized opening with LED readout on the control panel, approx. 25" infeed in front of hold downs. -- Variable speed feed 6-28 M/min. , feed motor 4.5 HP -- Feed chain 2-7/8" wide with rubberized pads -- Top pressure with non-stainable stretching wheels driven by gear motor and inverter with speed adjustment synchronously to chain feeding speed -- Infeed fence on left side -- Machine left side fixed, right side adjustable -- Complete control panelWorking Stations: -- 1st station: Profiling unit J-33 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 2nd station Profiling unit J-32 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 3rd Station : Profiling unit J-33 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 4th Station: Profiling unit J-32 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm NOTE: machine will require some rebuilding and maintenance in regards to ball screws and Dovetail Guides per statement by current owner. They are replacing it with a new machine.

Friulmac Rondamat E End Matcher

480V | 15 HP

12 1/2' x 28' Froedge 6 Strand Green Chain

450 Froedge Deduster #C864

Model: 450 LBD, SN: 23719L, 8" width capacity, electric drive, good condition

This system is ready for immediate removal.

The 2016 Frontline Gang/Edger combo is a reliable and efficient sawmill machine designed to optimize lumber processing. Equipped with a robust 150 HP 3-phase motor, it efficiently handles 6" x 14" gang cants and accommodates board widths up to 24". The machine features both infeed and outfeed conveyors, with cant assist and holdover mechanisms, ensuring smooth handling and transition of materials. With a capacity to cut up to 12 boards, this edger provides precision and consistency, making it a dependable choice for high-volume operations. The soft start option minimizes mechanical stress during start-up, thus enhancing the machine's lifespan. This used model comes with additional parts, spacers, and blades, making it well-equipped for continued operation. Overall, the Frontline combo has proven accuracy and reliability, demonstrated by its previous operational performance. It's a solid investment for any sawmill requiring robust and consistent gang and edger processing capabilities. Contact us for further details.

Brand New 42" Grapple Frost Bite Brand hydraulic Grapple for skid steers and Tractors. Comes with either universal (quick attach), Global or John Deere mounts, your choice. All pivot points are greaseable and have bronze bushings for longer life. Designed for handling and stacking logs, loading live decks on mills and firewood processors. Can also be used for moving stones, culverts, hay bales (round or square), basically anything that it will fit around and your machine will handle. Accessories, Flat face couplers, we have a plate that goes along the bottom to pick up rocks for building rock walls etc. 5 year warranty. Cost is $2095.00. Forestry & Construction

1986 Fruehauf 45'x 96" tandem axle walking floor trailer; swinging doors; spring ride; serial number 1H2Y04523GA018363

1984 Fruehauf 48' enclosed, tandem axle, van trailer, spring ride, serial number 1H2V04821EH055933

Friulmac Dualfeed Double End Chop Saw & Moulder Feeder Friulmac Dualfeed Automatically Trims Workpieces and Feeds into a Moulder Cutting Length: 200mm - 1500mm (8" - 59") Cutting Width: 30mm - 110mm (1.2" - 4.3") Cutting Thickness: 15mm - 60mm (0.6" - 2.4") Trim Saw Motors 5.5HP (4KW) Feed Motor 3.5HP (2.64KW) Anti-Kickback Spring-loaded Top Pressure System w/ Manual Adjustment and Readout Manual Board Length Adjustment w/ Readout Manual Blade Height Adjustment w Readout Hopper Fed Voltage: 460V 3PH

- End Matcher for the Continuous Feeding of Random Length Work Pieces - Minimum Working Length: 160mm (6.3") - Working Width: 30-250mm (1.18"-9.84") - Working Thickness: 10-30mm (0.39"-1.18") - Two 7-1/2 HP, 3ph Profiling Motors - Spindle Speeds: 6,800 RPM - Spindle Diameters: 40mm - Cutterhead Feed Motor: 1 HP - Two 1-1/2 HP Motors for Infeed/Outfeed Conveyors - Infeed/Outfeed Conveyor Sizes: 123" x 11" - Sound/Safety Enclosure - New in 2004 - Current Voltage: 460V

Sanding wheel shaper for the production of profiles on the sanding wheels. -- Template carrier holds metal or plexiglass template (same as can be used on the moulder knives). -- Spindle length 5" with 1" diameter arbor for wheel support. Handles 8" diameter wheels (3) included with the machine. -- X and Y axis on dovetail slide with lineal bearing support for smooth movement during the wheel grinding. Pneumatic clamping on grinding wheels. Depth of grinding 1.5" for raised panel. -- Tilt capabilities from 0 to + 30°. -- Grinds all types of varda wheels on 1 HP motor with speed of 1,750 RPM. --You can customize this machine to you needs.

FS-Curtis 7.5HP/3 Phase Air Compressor

Curtis 30HP Air Compressor