Cutler-Hammer For Sale

NORTH AMERICAN PL-30 ROTARY PHASE CONVERTERPro-Line is the Professional Series, digital start, CNC rated, general purpose single phase to three phase rotary phase converter designed to take standard single phase energy and supply full running current to three-phase equipment.Equipped with: -- Control Panel -- NEMA 1 Enclosure (Indoor) -- Built-in Motor Starter -- Digitally Controlled and Protected Start Circuit -- ABB / Baldor Idler Generator Motor -- ODP (Open Drip Proof) – Indoor Rated -- Soft Start -- 10-Year Parts / Lifetime Labor Warranty

Northern Automation Lumber Stacker with Lift Table. 3 phase. 36"-192" capacity. #C935

Has (2) Blades Will cut up to a 12 x 12" Powered by (2) 20 HP 460 Volt 3 Phase motors Runs (2) 1 1/4" band blades Excellent Condition, (new condition with less than 4 hours use).

16 HP 12 filter bags up 4 collection bags lower Lots of pipe

Norwood LumberPro HD36 23hp (627cc) B&S V-Twin OHV electric start gas engine , 4 ft. bed extension for 16 ft. total , log rolling ramp, auto dog assist. Used as hobby mill - low hours. Includes any new blades available jack stands for levelling Stationary now but can easily converted to mobile.From Mgf.

The HD36 Norwood Band Mill is a used band mill tailored for precision and efficiency. It is equipped with a 1 1/2" band saw, allowing for precise thin kerf cutting. The mill offers a generous cutting length of 16 feet, suitable for large-scale lumber milling tasks. It is powered by a robust 23 HP Briggs gas engine, ensuring dependable performance during demanding operations. This model operates entirely manually, giving users full control over each cutting session. The mill is in good working condition and has been maintained to ensure continued reliability. Ideal for those in need of a cost-effective solution for their lumber processing needs, the Norwood HD36 is a dependable choice for both hobbyists and professional sawyers alike.

Nova Dry Kiln 26’ wide x 25’ deep holds 5500-12000 board feet propane or Natural Gas fired

NOVA TTF-6200 Dry Kiln System; Unassembled Front Load Kiln Designed to hold 5,100 bd. ft 4/4 Lumber, or 6,120 bd. ft 8/4 Lumber, Using 3/8" (9 mm) stickers. -- Specifications: Interior Dimensions: H 10' 3,5" (3.14 m), D 7'2"(2.19 m), W 25' 3" (7.7 m). -- Loading Door Opening: H 9' 10" (2.85 m), W 25' 3" (7.7 m). 1/8 " Aluminum sidewall bumpers, side hinged doors, exterior installation. -- Average 4/4 capacity: 5,100 bd. ft (12 m3) with 3/8" (9 mm) stickers. -- Average 8/4 capacity: 6,120 bd. ft (14 m³) with 3/8" (9 mm) stickers. -- Price shown is for kiln only. -- High horsepower heat requirement: 128 k BTU/hour. -- Heated Floor System, manuals and blueprints. -- Electrical Requirements: 230 VAC, 1 Phase, 60 Cycle, 25 kw/Hr max.

(2) Unassembled front load Kilns only System with high HP heat and exhaust designed to hold 8,461 bd/ft (20 cub.m) of 3/4" (25 mm) lumber and 10,475 bd/ft (25 cub.m) of 8/4" (50 mm) lumber (35 cbm). -- Kilns internal dimension: Height 12'3-1/2" (3.75 m), Depth 16' (4.88 m), Width 21' (6.4 m). -- Loading door opening of 10' (3.05 m) x 21' (6.4 m); 1/8" aluminum side wall bumpers, side hinged doors, exterior installation. -- High HP will service the heat requirements up to 245k BTU/Hr. -- Electrical requirement of 230 VAC, 3-Phase, 60 Cy; 7.21 kW/Hr. -- System includes: Timber Dry management automated Dry Kiln Controls for each kiln, touch-screen operator interface, data recording, optional remote access, and networking capability, Replacement part kit for a kiln. Manuals & Blueprints

Unassembled Front Load Kiln with Standard Heat and Exhaust -- Interior dimensions: H 17' 6" (5.33 m), D 25' 8" (7.8 m), W 26' (7.9 m). -- Loading Door Opening: height 14'6" (4.4 m), width 25'3" (7.7 m). 1/8" Aluminum Bumper Walls, Top Hinge Door, Exterior Installation. -- Average 4/4 capacity: 25,459 Bd Ft. with 3/4" stickers. Average 8/4 capacity: 33,293 Bd Ft with 3/4" stickers. -- Price shown is for kiln only. -- Standard HP Heat requirement: 382k BTU suitable for drying dark hard woods; Optional high HP Heat requirement: 674k BTU suitable for drying softwood and white hardwoods. -- Electrical requirements: 480 VAC, 3 Ph., 60 Cy; 16.5 kW/Hr. Timber Management Control System with touch screen operator interface, data recording, remote access & networking capability. -- Features: Control room with heated air intake; 12'H x 4'D x 26'W. Top Hinge door opening System includes "230" electric chain hoist. Boiler Room: 12' W x 25' D x 17'6" H. 10' roll up & (1) access door. - Timber Dry Management Network Capability.

2018 Nyle 40,000 Bd Ft. Capacity Stand Alone Dry Kiln, (2) 20,000 Bd Ft. Chambers w/(4) 5hp Fans, Steam Heated & Attached Control Room w/Controls

2015 Nyle Approx. 50-60,000 Bd Ft. Capacity Stand Alone Dry Kiln w/(9) 5hp Fans, Mdl #ICP-CK955, Steam Heated, S/N 156537, Includes a 2022 Nyle HRV Unit, Mdl# HRV5000-480/3, S/N 221148, Attached Control Room & Controls

Nyle L500 Kiln (High temperature system)

Nyle Firewood Dry kiln No chamber included

OGAM Gang Rip 30HP Motor w/electrical still Hooked Up, Model PO 195, S/N 15149

Oliver Sawmill New Carriage Wheels New battery

1990 Onon Cummins MDL 500DFFB 39955F S/N J900356550 3 Phase 500 KW Genset

ONEIDA AIR SYSTEMS XXK070323 Cyclone Dust Collector w/ Rotary Air Lock: Cyclone & Fabric Filtration Dust Collection System.Specifications: -- 2,900 CFM @ 1.5" SP with 7.5 HP US Made, Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. Powder coated paint finish, weather-proof cyclone and fan blower. -- (2) High Efficient Izumi Axtar Spunbond Media cartridge after-filters for 310 sq. ft. of filter media. Filters 99.9% efficient of 0.2 - 2.0 microns, Teflon-like coating to facilitate dust cake release. -- Impeller is 16.5" Diameter, Single-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy. -- Inlet size 10" round. outlet 12" round dia. Includes: -- Rotary Air Lock, magnetic starterOptions: -- Freestanding Leg Kit with Dual 55-Gallon steel drum less Rotary Air Lock...as for pricing. MADE IN THE USA.(Actual P/N XXK070323-460-AIR).

ONEIDA AIR SYSTEMS XXK10 Cyclone Dust Collector w/ Rotary Air Lock: Cyclone & Fabric Filtration Dust Collection System.Specifications: -- 3,800 CFM @ 2.3" SP with 10 HP US Made, Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. Powder coated paint finish, weather-proof cyclone and fan blower. -- (3) High Efficient Izumi Axtar Spunbond Media cartridge after-filters for 465 sq. ft. of filter media. Filters 99.9% efficient of 0.2 - 2.0 microns, teflon-like coating to facilitate dust cake release. -- Impeller is 17" Diameter, Single-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy. -- Inlet size 12" round. outlet 12.5" x 10" square dia. -- Includes: Heavy Duty angle iron stand, magnetic starter, and Rotary Air Lock. MADE IN THE USA..

ONEIDA AIR SYSTEMS FXK041500 Cyclone Dust Collector w/ After-Filter Plenum: Cyclone & Fabric Filtration Dust Collection System. -- 3,800 CFM @ 12" SP to 6,000 CFM @ 2.7" SP with 15 HP Baldor Class F, TEFC motor with 1.15 service factor. -- High efficiency 12-gauge cyclone barrel with fully seam-welded construction. Powder coated paint finish, weather-proof cyclone and fan blower. -- (4) High Efficient Izumi Axtar Spunbond Media cartridge after-filters (hanging) for 620 sq. ft. of filter media. Filters 99.9% efficient of 0.2 - 2.0 microns, Teflon-like coating to facilitate dust cake release. -- Fan is welded carbon steel, backward incline, dynamic, two plane balanced. Same as aircraft turbine rotors. -- Inlet size 14" round. outlet 16" round dia. -- Includes: Heavy Duty angle iron stand, magnetic starter, internal silencer reduces sound to 85-87 dB @ 10'Includes Rotary Air-lock for dumping into a waste bin!MADE IN THE USA.