Equipment For Sale

KUFO LS-1000E Self-contained Dust CollectorDesigned for use in industrial environments for extracting different kinds of dust and dry shavings from single or multiple dust sources. It can be installed directly without any additional fire or explosion protection measures.Specifications: -- 10 HP Direct drive blower with backwardly curved blades and 5,239 CFM air flow rating; Inlet dia. 12". -- 5 Micron Top Filters -- Blower is located on the clean air side. -- Top sound reduction cover at 83 db from original 90 db. -- Fire control system with built-in Fire Sprinkler featuring auto-temperature activation (requires a water line hook-up). -- Pulse jet filter cleaning with compressed air. -- (2) Dust collection tank containers.Options: -- Built in Fire Extinguisher (2) with auto temperature activation. -- "Y" Adapter with 9-3/4" inlet opening with 4" x (5) fitting.

KUFO UFO-103H Dust Collector. With 1-micron dust filtration efficiency this collector will make your shop cleaner, healthier, and more productive. -- (3) Fabric filter top bags are mounted above individual plastic collection bags. -- The multi-bag system is placed on sturdy steel legs in a horizontal series. -- 3,125 CFM Output with single-stage blower. -- Heavy Duty 5 HP motor with push button control and motor starter. -- 14" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in rings for easy installation and removal of bags. -- Filter bags filter out dust particles down to (1) Micron in size; 6 mil thick plastic bottom collection bags are standard.

KUFO UFO-104H1 Dust Collector. Radial-finned 8-bag Dust Collector. -- 6,627 CFM single-stage collection system. -- Heavy Duty 10 HP induction motor. -- Steel impellers that are dynamically balanced. -- Deflection baffles and bag hooks. -- 30-Micron 23-3/4" bag filters. -- Ready to operate with (8) upper filter bags and (2) lower cloth collector bags. -- Plenty of storage space with (2) bottom bags holding 29-3/4 Cu. ft.(Installed dimensions - 91" L x 32" D x 135" H)

Kuka KR60-3 Robot System KR C4 Control System Kuka Programming Smart Pad Robot Enclosure (3) Heavy duty conveyor racks

KUNDIG DUPLEX 53-RC-E Wide Belt Sander (2) Heads; 52" Width cap. Drum, Combination Head.Head Configuration1st Head: 7-1/4" Dia. rubber covered contact roll, 25 HP motor.2nd Head: Combination head with rubber covered contact roll and segmented finishing platen, infeed sensors sense the panel and electronically control the platen height with timers, variable edge control can also be set, 20 HP motor.Specifications: Abrasive belt size 54" x 75" with air tensioning and electronic abrasive belt tracking, both heads with abrasive grit thickness adjustment, 2 HP Variable feed drive. -- Conveyor belt speeds 9 - 45 FPM, controlled by electronic inverter & adjustable on the control panel; infeed & outfeed rubber covered holddown rollers.Equipped with & Features: -- Workpiece thickness cap. 1/8" - 6-1/4", motorized thickness adjustment with LED readout. -- A joystick controls the conveyor opening and start/stop of the feed, automatic "over-thickness" protection and automatic conveyor belt tracking. -- Constant passline of conveyor height at 35". -- Air blow off of second head abrasive belt. -- Emergency stop button, motor load meters, magnetic controls.NOTE from the seller: There is a small leak in the air bladder . The sander has 6,541 working hours

KUPER FLI 1250 INNOVATION Series Feed-Thru Veneer Splicer with top & bottom heating.Automatic linear splicer with an integral glue applicator. Can glue/join the edges of strips or similar pre-glued veneer. UREA-based glue is preferable with veneers exposed to high temperatures during subsequent processing. Features: -- Gluing system to join veneer edges passing through a high speed of PVAC or urea "disc style" glue application zone or will join pre-glued veneers for an immediate tight hold and joint. Heating system with high efficiency and an effective heating width of only 12 mm. -- Size capacity: Can handle veneers, 0.3 - 2.5 mm (0.012" - 0.098") veneer thickness; min. veneer strip length approx. 350 mm (13.8"); min. strip width 45 mm (1.77"); max. width. 49.2" (1250 mm) on throat side. -- Equipped with: Heating elements top/bottom with individual temperature control, approx. 3/4" (19 mm) wide narrow heating elements. -- Feed Chain/Drive: Maintenance-free high-efficiency plastic chains prevent heat conduction and stains. With dual upper & lower feeding transport chains made of low-heat conductive fibre. Direct Drive variable feed speed from 40 - 180 FPM, 1.5 HP (1.1 KW) feed drive, disc roller drive feeding system w/thickness compensation. -- Complete with: Stainless & Chromed work surface, operator controls in rotating eye-level height control panel, and digital temperature settings & thermostats. Heating temperature approx. 220° C max. Length of heating section 1200 mm (47.2"). -- Includes: Chiller "which prolongs the glue pot life". -- Floor space: Approx. 115" x 78" x 58" high (2900 x 1960 x 1470 mm). -- Services required: Connected load: approx. 11.8 KVA. Clean/Dry air supply: 1.2 CFM (30 NL/min) @ 90 PSI (6 bar) -- OUTSTANDING FEATURE: Comes with a selection of spare parts including a brand new feed chain!. One of the cleanest machines of its type you will see for resale in recent times!

L & L 400HP Belt Driven DensifierSpecifications: -- Main motor: 400 HP -- Densifier tank thickness: 3/4" Wall -- Tank dimensions: 50" Dia. x 48"Equipped with: -- Funnel-top lid with interlocked limit switch -- Heavy-Duty operator platform with stairway -- Soft Start -- Infeed Conveyor -- Mezzanine -- Was used to process PE film scrapNOTE: Unit has seen very little use.

LM Bump Rollcase Package Saw Includes waste conveyor under saw and elevated conveyor 550v/3 phase Approx 55" Bar Already dismantled and ready to load, as shown in the last two photos.

L & M Verticut 2000 Saw bars, LM unit saw bars Overall length 68”+- 5 bars available Used Saw chains available Contact us for a delivered price

2003 | Honda Engine | Needs Carburetor Work

2016 | Model# 200MP-7-SS | Honda Engine | Ran when taken out of service

LA NUOVA SCOLPITRICE 201-16 Multi-Spindle Carving Machine.(16) Cutter Stations, 55" max. workpiece length,Specifications: -- (16) Dual carving spindle heads, 8" between spindles, 20" max. working diameter. -- Each head has a roughing & finishing spindle, all heads swivel 360° with pneumatic locking. -- Upper carriage controlled by (2) High Frequency changers allowing (2) motor speeds of 12,000 & 18,000 RPM. -- Pneumatic chucking of material, stock turns 360°. Copy stylus of hardened and ground steel, adjustable for depth on either side. -- Traverse feed of carving heads was patented and requires no maintenance. -- Includes: Lot of tooling. Table for flat/horizontal copying.Note: Machine completely gone over and all heads rebuilt in 2011 and used sparingly since.Actual model is 201-16.

LACEY-HARMER LD-2002 Diode LaserEconomical self-contained Visable Diode Laser, optics housed in a sealed cell to provide added protection against contaminants and moisture; nickel plated housing. -- Specifications: 100 Millampere operating current, -20° to +40° C operating temperature, 90 V for 250 nano-sec surge protection. Beam angle 5 to 90 degrees, 5mW to 35mW output, 636 nm wave length for lines up to 20' projection. -- Options: 36" Long Diode Array Stand adjustable up to 90° from mounting surface, lines move easily and parallel to each other, micro-adjustment to make lines parallel, no tools needed. -- Optional items consist of: Crossbar style mounting bracket, please add...$ 90; axis slide brackets for easy positioning, add...$ 125 or alteratively a simple universal stationary mounting bracket, please add...$ 30.

LACEY-HARMER E-LINE Self-contained Visible Diode Laser End ShooterEconomical self-contained Visible Diode Laser; optics housed in a sealed cell to provide added protection against contaminants and moisture; nickel plated housing. -- Specifications: 100 Millampere operating current, -20° - +40° C operating temperature, 90 V for 250 nano-Sec mechanical stock. Beam angle with 5 mW - 15 mW output, 636 nm wave length. -- Options: 36" Long Diode Array Stand adjustable up to 90° from mounting surface, lines move easily and parallel to each other, micro-adjustment to make lines parallel, no tools needed -- Projects a line from approx. 12' to 15' depending on area lighting -- Consisting of two parts; (1) crossbar style mounting bracket, please add...$ 143; (2) axis slide brackets for easy positioning, add...$ 125 each or alteratively a simple universal stationary mounting bracket add...$ 30.

B21-404 | Laguna | HP 125 | 2022

B21-404 | Laguna | HP 125 | 2022

LAGUNA PX16 PLANERLoaded with features for convenience, power and versatility. The ShearTec II helical cutterhead features solid carbide inserts that produce an incredibly smooth finish and produce far less noise.Features: Segmented infeed roller lets you feed multiple boards without having individual boards stall out due to small variations in thickness -- Infeed/outfeed rollers instead of cast iron tables for a more compact footprint -- DRO and speed control are mounted on the control panel and angled toward the user for better ergonomics -- Large dust chute can be pointed left or right on the back of the machine for optimal hose routing -- Bed roller adjustment mechanism, Bed is secured by a 4-post system for consistent performance with every cut -- Infeed roller is serrated, while the pressure bar is located close to the cutterhead, virtually eliminating snipe -- ShearTec II cutterhead features 4-sided solid carbide inserts with a T-shoulder rather than a cone-shaped design, helping to prevent cracking of the inserts -- Deep gullets make dust and chips disappear quickly which produces a better finish -- ShearTec II inserts are 15 x 15 x 2.5mm, which is slightly larger and thicker than standard knives (14 x 14 x 2mm)ShearTec cutterheads have one more advantage: they are quiet!Specifications: -- Motor: 5 HP 60hz/23 Amp -- Bed Size: 16'' x 21-1/2'', Pull-Out Extension: 4'' -- Max. Depth Of Cut: 1/4'', Max. Stock Thickness: 8'', Min. Stock Thickness: 1/4'', Min. Stock -- -- Length: 8'', Max. Stock Width: 16'' -- Feed Speed: 16 – 28 FPM Variable Speed -- Dust Port Diameter: 4'' Left Or Right -- Cutterhead RPM: 5,000, Cutterhead Diameter: 3'', Cutterhead Insert #: 108 x 4-Sided Carbide, 6 Row -- Thickness Readout: Wixey DRO -- Noise (1m away): 83dBNOTE: The above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot. Shipping wt.approx 596

Laguna Smart Shop II CNC Router, 4' X 8' with ATC48" x 96" Moving gantry, fixed table design in a front-to-back configuration with a 6-zone vacuum table with T-slots, including manual controls.Specifications: 48" x 96" x 9.5" Axis travel with 12" clearance under the gantry, Speeds of 900 IPM, rapid travel with 600 IPM maximum cutting speedSpindle: (1) 12 HP "HSD" spindle with (ATC), 5,000 - 24,000 RPM Range, Ceramic Spindle Bearings. Supported by Automatic Tool Changer with (8) tool position tool rack Includes assorted tool holdersAll axes: Ride 25 mm heavy-duty HiWin HG Series linear bearings and rails on all axis rack. "Helical" rack-and-pinion drives on "X" and "Y" axis, and precision-ground ball screw drive on "Z" axis. Gantry is driven on each end (two "helical" rack-and-pinion drives on "Y" axis)Control & Operator Interface: The B & R Automation (Austria) System-matched controller and drive components for easy diagnosis and exceptional reliability. -- Machine features the networking, connectivity and online troubleshooting typically found in Windows environments without the Windows baggage. -- Runs industry-standard G-Code that can be created from any CAM software package. Program transfer to the controller can be accomplished with USB, or via Ethernet transferComplete with: Expandable control system for custom applications. Spindle speed control through programming, Manual overrides of spindle speed and feed speeds during run. Centralized lubrication system for all axis, assorted tool holdersIncludes: Additional set of bits.NOTE: The above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

Laguna PSHAP 5030-0130 ShaperThe Laguna pro shaper combines a precision shaper with features normally found only in much higher-priced machines. For starters, the table measures an impressive 31″ x 39″ and is pre-drilled to accept most power feeders. The fence has a precision micro-adjustment that is aligned by a solid steel bar. Each full revolution of the turn handle gives an exact 1/16″ adjustment to the fence. Offers 3 speeds with a unique quick-change poly-groove belt system rather than the traditional V-belt. Digital readout is standard for the spindle height. The pro shaper is also equipped with a reversing switch and all controls are mounted with an easy access panel. The fit and finish on this machine is top-notch and even includes a wheel kit built right into the base. Specifications: -- Motor: 7.5 HP -- Fence: Micro adjustment -- Table size: 39 - 5/16″ X 31 - 7/16″ X 3 - 1/2″ -- Spindle travel: 4″ -- Spindle size: 3/4″ and 1-1/4″ -- Capacity under nut: 6″ (for 1-1/4″) & 4″ (for 3/4″) -- Spindle speeds: 5000 / 7000 / 10000 rpm -- Table opening diameter: 7 - 5/16″ -- Digital readout: Standard -- Direction: Forward/Reverse switchNOTE: The above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

Laguna Fusion F3 36" Fence Table SawLaguna Fusion line was developed for demanding woodworkers. Equipped with a precision fence, F3 features the Hi/Low aluminum extrusion known from European saws. The hybrid fence on the Laguna Fusion offers the best of European and American fence features. This fence is NOT designed to be used on the LEFT side of the blade! Rail or tube on the LEFT side is provided only to make the ON/OFF switch position. Permanently lubricated bearings & Acme screws are part of the internal DNA.Specifications: -- Dust Port Size: 4″, Blade Guard Dust Port Size: 1-½″ -- Maximum Blade Diameter: 10″ -- Arbor Size: 5/8" Arbor Speed: 4,500 RPM -- Maximum Width Of Dado: ¾″ -- Blade Tilt Direction: Left, Max Blade Tilt: 45° -- Maximum Depth Of Cut At 90°: 3-1/8", Maximum Depth Of Cut At 45°: 2-1/8"Features: 3HP TEFC Motor, Industrial Cabinet, Fence & Trunnions, 10 x 40 T Carbide-Tipped BladeNOTE: The above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot. Overall Width (side-to-side) 69", Overall Depth (front-to-back) 56", Overall Height 43"