Equipment For Sale

$50,000 - $88,800 Needs Assembly - We can Assemble or Buyer May

Klamath 7' Band Mill Model: BS-72 S/N:671

1994 KMC1000 -Tree tow grapple -Clark winch -353 Detroit with blower and turbo -3 speed Clark transmission -New injectors -Hours are unknown -New paint

2016 KMC 2100 Skidder, Includes a 1,000 Gallon Water Tank, Detroit 653 Engine with Less than 1,000 Hours, Rebuilt Clark Powershift, Undercarriage is basically new, Transmission Rebuilt, Clark Winch, New Bushings in Tracks, Ready for the Woods. Gross Vehicle Weight: 27,250lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

KEN MILLS ENGINEERING 12 BAG Dust Collector w/ Airlock and AugerSpecifications: -- 20 HP CORAL blower with 7,000 CFM -- 12" Inlet. -- (12) Filter bags. -- Air Lock w/ 1 HP auger for waste removal.

KMS 3 Saw Edger 30" x 4" Capacity Laser Lights

KNIGHT l76119 Scissor LiftSpecifications: -- Pneumatically operated 4,000 Lbs. capacity. -- 75-3/4" x 118-1/3" Top platform. -- Lowered height 8-1/2", raised height 26" for total travel of 17-1/2". -- Full safety skirt with pneumatic control pedestal.

KNIGHT CL2444-3000 Scissor LiftSpecifications: -- Pneumatically operated 3,000 Lbs. capacity. -- 24" x 44" Top platform. -- Lowered height 7-1/4", raised height 24-1/4" for total travel of 17". -- Full safety skirt with pneumatic control pedestal.

Kobalt 1 Phase 5HP Air Compressor

Kobelco SK200 LC Runs and operates

MLS Number 10846369 2018 Kobelco SK260LC-10 Excavator 185 HP 4-Cylinder Engine Variable Hydraulic Pumps 1170 Hours 85% Undercarriage with 36” Triple Grousers 60,000 lbs. Machine Factory Warranty through 8-29-21

KOBELCO SK350-9 Crawler ExcavatorSpecifications: -- Engine: 270 HP (Diesel) -- Number of cylinders: 6 -- Esco Bucket: 54"; Equipped with: -- A/C -- LCD display -- Auxiliary Hydraulics -- Good Undercarriage -- Hours: 9,701

2018 Kobelco SK140SRLC excavator track hoe, joysticks controls,enclosed cab, heat and air cab, 24 inch pads, nice tight and dry machine. 8,417 hrs. $52,000.... Call eddie at 931-seven 04-7852

Bucket Counterweight Engine Enclosures Lift - Standard Lighting Mirrors ROPS - Enclosed Steering Type - Wheel Ultra Low Sulfur Diesel Fuel

Kobelco Crawler Crane CKE2500 -18200 hours -2 Winches -250 ton crawler -200’ of boom -Mitsubishi engine -Rooster sheave -Heat and air -Removal counterweight system -LMI -Anti tube block -Block and ball

Kobelco 115SR Excavator, 5700 Hours, Blade, Mechanical Thumb, Bucket

2004 KOBELCO 135SR EXCAVATOR 13,600 HOURS THUMB RUNS GOOD SOME LOOSE PINS GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

KOCH SBD-8 BORING MACH. (FEED THRU DBL END TRIM, BORE & DOWEL): -- Specifications:0.6" - 1.18" (15 - 30 mm) Material thickness; 0.9" - 9.8" (23 - 250 mm) width; & 10" - 98.4" (254 - 2,500 mm) length cap.; -- Working pass height 36.2" (920 mm); Capacity of approx 25 Work Cycles/Min. -- Features:Motorized opening with digital setting. Automatic hopper feed with hydraulic stock feed beam and automatic return conveyor to operator. -- Each side equipped with: Trim saw units, Boring units with horizontal and vertical drilling, & Dowel insertion. -- Linear path control for stock transport with low profile machine bed and linear guides. Fixed stock stops. -- Adjustable working stations with Manual & motorized adjustments. -- Horizontal Drilling:Each side with (1) 2.7 HP (2 kW) - 3,400 RPM Boring unit. -- Each horizontal boring unit has a (3) Spindle Type D-1277 drilling chucks on 32 mm centers. -- Drilling Chucks hold 10 mm dia shank & 70 mm max bit length. -- Each head moving on linear guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holes. -- Top Vertical Drilling:(2) Top Vertical Boring Units with rotating device. Each unit 2.7 HP (2 kW) - variable speed from 3,000 - 6,000 RPM. -- Each Drilling chuck with mechanical digital read out for manual finite adjustment. -- Drilling Chucks hold 10 mm dia drill bit shank & 70 mm max bit length. -- Each head moves on guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holes. -- Each vertical unit can be equipped with Boring blocks (swivel 0° - 90°) with pneumatic locking. -- All Vertical units are equipped with pneumatic locking & individual adjustment of the boring block. -- Distance position readouts on all heads for finite "X"/"Y" adjustments; and "Z" axis boring depth control. -- Doweling:With (2) total dowel Inserters, (2) inserter on each side, with vibrating dowel bowl feeders. -- Includes automatic dowel measurement, pressurized glue tank, & back-wash rinsing tank. -- NOTE:This machine is currently setup for 0.437" dia. x 1.75" long dowels (11 mm dia. x 44.45 mm long dowels). Other sizes & additional dowel injectors can be purchased from Koch, at additional cost. -- Operating Features:Mechanical digital readout setting for all drill stations for "X"/"Y"/"Z" axis positioning. -- The stationary machine side is on the LH side (seen in transport direction) and not adjustable. -- The RH is adjustable via motorized movement along the "X" axis. -- The machine is equipped with Hopper Feed & has a part stack capacity of approx 9.8" (250 mm) & working capacity of approx 48 Pieces/Min. -- Stock infeed belts move the workpiece through an intermediate hopper to the stock support. Then the workpiece is transported through the working stations by means of transfer belts with lateral stock alignment. -- Work pieces are automatically feed and positioned to pneumatic stops then clamped prior to trim, drilling or insertion. -- Compl

KOCH SBD-B BORING MACH. (FEED THRU DBL END TRIM, BORE & DOWEL): -- Specifications:0.6" - 1.18" (15 - 30 mm) Material thickness; 0.9" - 9.8" (23 - 250 mm) width; & 4.7" - 98.4" (120 - 2,500 mm) length cap.; -- Working pass height 36.2" (920 mm); Capacity of approx 25 Work Cycles/Min. -- Features:Motorized opening with digital setting. Automatic hopper feed with hydraulic stock feed beam and automatic return conveyor to operator. -- Each side equipped with: Trim saw units, Boring units with horizontal and vertical drilling, & Dowel insertion. -- Linear path control for stock transport with low profile machine bed and linear guides. Fixed stock stops. -- Adjustable working stations with Manual & motorized adjustments. -- Horizontal Drilling:Each side with (1) 2.7 HP (2 kW) - 3,400 RPM Boring unit. -- Each horizontal boring unit has a (6) Spindle Type D-1277 drilling chucks on 32 mm centers. -- Drilling Chucks hold 10 mm dia shank & 70 mm max bit length. -- Each head moving on linear guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holes. -- Top Vertical Drilling:(4) Top Vertical Boring Units with rotating device. Each unit 2.7 HP (2 kW) - variable speed from 3,000 - 6,000 RPM. -- Each Drilling chuck with mechanical digital read out for manual finite adjustment with, KOCH's "QC" (quick change) system & rotating device. -- Drilling Chucks hold 10 mm dia drill bit shank & 70 mm max bit length. -- Each head moves on linear guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holes. -- Each vertical unit can be equipped with "QC" Boring blocks (swivel 360°) with pneumatic locking. -- All Vertical units are equipped with pneumatic locking & individual adjustment of the boring block. -- Distance position readouts on all heads for finite "X"/"Y" adjustments; and "Z" axis boring depth control. -- Doweling:With (4) total dowel Inserters, (2) inserter on each side, with vibrating dowel bowl feeders. -- Includes automatic dowel measurement, pressurized glue tank, & back-wash rinsing tank. -- NOTE:This machine is currently setup for 0.437" dia. x 1.75" long dowels (11 mm dia. x 44.45 mm long dowels). Other sizes & additional dowel injectors can be purchased from Koch, at additional cost. -- Operator & Machine Control:Beckoff SPS PLC for machine function & error diagnosis. -- Operating Features:Electrical digital setting with all drill stations arranged with readouts for "X"/"Y"/"Z" axis positioning. -- The stationary machine side is on the LH side (seen in transport direction) and not adjustable. -- The RH is adjustable via motorized movement along the "X" axis. -- The machine is equipped with Hopper Feed & has a part stack capacity of approx 9.8" (250 mm) & working capacity of approx 48 Pieces/Min. -- Stock infeed belts move the workpiece through an intermediate hopper to the stock support. Then the workpiece is transported through the working stations by means of transfer

KOCH SPRINT SELECT.LINE 3000 CNC RAIL BORE & ROUTING MACHINE: -- Specifications:NC-positioning for "X", "Y" axis, "Z" axis is manual adjustment. Horizontal drilling station, with 3 individually controlled drilling spindles with automatic step-by-step, boring into rail components, drawer parts, chair pieces, etc. at programmed random spacing. Horizontal Routing Unit for mortise, tenon, louver, strike plate, etc. type processing. -- Working Cap: Stock length (Y) from 4.25" - 31.5" (110 mm - 800 mm), stock width (X) from 0.75" - 120" (20 mm - 3,050 mm), stock thickness (Z) from 0.5" - 2.4" (4 mm - 60 mm), max. boring depth 1.1" (28 mm).120" (3,050 mm) "X" axis divided into (4) work zones of approx 29" (736mm) ea., one part can be processed, while the others are being unloaded or loaded. -- Equipped with: (10) Stock clamping cylinders; Stock clamping system for panels/rails, small parts & solid wood parts.(3) Independent Horizontal boring spindle, 7,200 RPM, 1.25 HP (.9 kW) motor. (1) Horizontal Routing Unit for Rails, mortise, tenon, louver type processing & Door strike plates, plungers, hinges, etc., 9,000 RPM, 3HP (2.2 kW) motor. -- Operator Interface:NC Front end with 15" color touch screen monitor pad & stored in built-in CNC control using Windows type operating system with graphics and online diagnostic. serial interface and USB connection. Touch screen pad at eye-level height, integrated into machine frame structure, menu driven operator interface for function control and graphic illustration of machine functions. -- Features: Positioning speed of working units at 197 FPM (60 MPM). -- Complete with:Central lubrication system; (2) Fixed fences (1-RH & 1-LH side), (2) pop up Center Fences & (4) working zones. -- Options Include:Some additional spare parts ordered with the machine & as pictured.