Caterpillar For Sale

2004 Morbark 50/48 Whole Tree Drum Chipper. 11,000 hours on a rebuilt 3412 CAT engine with 760HP, Auto Feed, Fire Suppression, Radio Remote and Tether cord. Machine was repainted. Length 40'8.25" Height 12'6" Width 9'9" Gross Weight (approx.) 72,120 lb

1998 Morbark 2400 Chipper, ONLY 1800 Original Hours, Perkins 185 HP Turbo Diesel Engine, Hydraulic Tongue Jack, Hydraulic Lift Assist Cylinder, Twin Disc SP 211 Clutch, Tires are at 50%, In Excellent Condition. Two Owner Machine, Ready for Work. Weight: 15,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Morbark 950 Tub Grinder -3000 hours -CAT 3056EATTAC engine (172hp) -Ready to work -Videos available upon request

2019 Morbark 40/36 Drum Chipper -1500 hours -C-18 CAT -Deleted -Clean Unit

1993 Morbark Model 1200 Tub Grinder, Equipped with a Cummins 650 HP Engine, Autofeed, Wireless Control, New Clutch 1 year ago, Hours are Unknown, New Turbo, New Injectors 300 Hours ago, Ready to Work. Weight 55,622 lb Length 38.15 ft Width 11.9 ft Height 12.8 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Morbark 4600XL Horzontal Track Grinder, Cat C27 with 7,500 hours, Magnetic Head Pulley, Radio Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Morbark 6600 Wood Hog Horzontal Grinder, Cat C32 with 8400 hours, Parked it 6 months ago. It ran until it was parked. Remote works. Known issues: Needs muffler Needs pto O ring Under side of yoke needs to be cut out and new plate put in. It ran till the day they cut it off so I’m sure they can get it running fairly quick. Needs a good amount of welding work under the yoke and around the mill. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Morbark Model 1200WCL Tub Grinder, Caterpillar 3412 Engine, hours unknown, Joystick Controls, Square Wear Plates, Enclosed Cab with Heat, Clutch replaced recently, 4" Screen and 2" Round Secondary Screens. Length 36 ft 0 in Width 11 ft 11 in Height 13 ft 6 in Weight 50,020 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 Morbark 1300 Tub Grinder -9000 hours meter doesnt work but has original ecm can read it -Loader -Few minor leaks -Mill in great shape -Augers are freshly hard faced -Belts in good shape -New injectors -Comes with an extra set of new hammers and tub rollers -A/c blows ice cold

1994 Morbark 23WCL 23" disk chipper With loader Good condition Includes: extra (new and used) knives, counter knives, & top plate

2021 Morbark 30/36 whole tree chipper -1884 hours -Cat Engine -Pintle hitch towed -Extra sets of knives and parts -Factory Engine warranty remaining PRICE REDUCED!!!!!!!

-400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

Cat 3412E 860hp Engine status report shows 43% average load factor, 3317 idle hours. 8899 hours on original engine. Completely serviced and runs properly. Morlift 500 loader with tight grapple, A/C cab all nicely fitted. Auxiliary air compressor Michigan model 40 knife grinder Extra knives Very sound, tidy chipper throughout. Call for complete condition report.

600HP, Advantage 3 drum, Wireless Remote, compressor, rebuilt turbo, serviced, nice machine for age

2009 Morbark 30/36 Tree Chipper -1045 Original hours -C13 440 HP -A/C blows cold -Clean tight chipper

Morbark 30-36 Portable Chipper 350HP Cummins Approx 4000 Hrs self Feeding Grapple Up to 18" Dia Material

2018 Morbark Model 4600XL Track Horizontal Grinder, Engine is a Caterpillar C-27 1050 HP Engine. Has 2,400 Hours of Running Time and 1,000 Hours Idling time, Undercarriage is 95%, Wireless Remote Control, Air Compressor, Metal Pully on Discharge Conveyor, Various Screen Sizes Ready to Work. Gross weight: 88,640 lbs. Length: 45” Height: 11’11” Width: 11’3” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Morbark 1821 Brush Chipper, Engine Ford 170HP Gas Engine, Hydraulic Winch, 2-1/2" Pintle Hitch, UCC Lighting, ONLY 187 Original HOURS , Ready for Work. Height 8'11" Width 7'3" Length 18'1" Gross weight (approximate) 8,900 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MTB BDV-1200 SHREDDER --Specifications Per Manufacture's Information --ROTOR Length: 1200 mm (47.2 INCH) Diameter: 416 mm (16.4 INCH) -- 150hp 460 volts -- The unique features of our BDR shredders allow for the most efficient size reduction of difficult material types at the lowest operating costs on the market -- Includes Stand and Hopper

MULTITEK - TRC 460, ...Rim Crusher: ...Less than (300) Hours!Features & Specifications:• Tough MULTITEK® products; simple and strong. Truck Rim Crusher makes wheel salvage easier. • Powered by: Fuel-efficient 25 HP liquid-cooled diesel engine with operator instrument panel control.• The powerful MULTITEK built 6" (15.2 cm) diameter hydraulic cylinder features a Heavy-Duty aluminum piston for continuous duty cycle application.• Power-assisted hydraulic wheel lift arm means less work to load heavy truck wheels.• Powerful 70,000 Lbs (31,752 kG) of crushing force.• Simple: Minimal training and maintenance required.• Standard 2"; ball hitch.• Dimensions: 80" (203 cm) W x 171" (434 cm) L; weight: 3,400 Lbs (1,542 kG).• Engine: Liquid-cooled Diesel with electric start.• Cycle Time: (35) Seconds.