Equipment For Sale

BECKER VTLF 2.250 Vacuum Pump (Oil-Free Vane):Specifications: -- (1) 6.4 kW (9 HP) Oil-less (Dry) Rotary Vane Vacuum Pump System; -- Pump has 169 CFM total 338 CFM max. 25"Hg; Heavy Duty construction, compact design, small footprint. -- 100% Oil-less vacuum pump is virtually maintenance-free with built-in carbon vanes & built-in suction filters, vacuum regulating valve, secondary suction for additional cooling, blow off valve/silencer; -- 2-1/2" BSP x 2" NPT nipple coupled to a TFC; 1,150 RPM motor.

Becker VTLF 250 Vacuum Pump: 9.3 kW (12 HP) Oil-less (Dry) Rotary Vane Vacuum Pump System, 176 CFM, max. 25"Hg; Heavy Duty construction, compact design, small foot print. -- 100% Oil-less vacuum pump is virtually maintenance-free with built-in carbon vanes & built-in suction filters, vacuum regulating valve, secondary suction for additional cooling, blow off valve/silencer; 2-1/2" BSP x 2" NPT nipple coupled to a TEFC; 190-255/330/440V, 1,160 RPM motorNote (2) unit available and the price is for each

BELFAB RPJ26-121 Pulse Jet Dust Collector with Rotary Air Lock and Transfer Fan.Specifications: -- 15,285 CFM approx. baghouse dust collector with (121) filter bags at 10-feet long with metal cages. Total of 1,884 sq. ft of cloth area. -- Filter Cleaning: Reverse Pulse Jet (RPJ) via plant compressed air that is sequenced by diaphragm valves/solenoids/manifold thru to a Venturi that injects a burst of air pressure to dislodge the dust build up on the outside of filter bags. This is a continuous process during the operation of the dust collector. (no shut down is needed). -- Main Fan: 75 HP side-mounted blower motor. with approx 26" dia. inlet. Rated at approx 15,000 CFM @ 15" SP. -- Comes with: Main starter with control panel. -- System includes: Relay/Transfer fan, steel structure support stand, low height as waste is transferred by fan, safety ladder/platform, safety railing, and approx. 20" Rotary Air Lock. -- Housing is about 8'-5" square by about 23' high overall. Weight with structure is about 8,600 Lbs. Note: Round cone section with storage capacity of about 246 cu ft may not be included. in above height and weight. -- Available in May 2025.

Belfab Pyradia NBM-OP Dust Collector (3) Systems available

84" maximum opening; 9" minimum opening on 90° trim; (2) 3 HP trim saw motors; 16" dia. saw blade capacity; 1" diameter saw arbor; (2) 3 HP boring units (boring heads not included); saws and boring units tilt 10° up, 23° down and swivel 90° for simple or complex miter work; .5 HP motorized open and close; (2) pneumatic holddown clamps; saw and boring units upgraded to hydraulic control; 5 HP hydraulic pump; retrofitted with electric brake system

Bell Ultra C Parts machine with several items

2003 Bell Ultra C Feller Buncher, Equipped with a 33" Dangle Head Saw, Engine has had a Cummins Factory Recon motor installed in past, Has 5,000 Hours on Engine, Joy Stick Controls, NEW 23.1 x 26 Tires and New Ring Chains, Enclosed Cab with Heat and Air Conditioning, Garage Kept, Ready for the Woods. Length: 34 ft 10 in Width: 8 ft 4 in Height: 11 ft 2 in Weight: 36,130 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Bell Ultra T 8104 hours Runs and operates good Call for details

1993 Bell Ultra T Track Feller Buncher, Engine Deutz 80 HP Diesel Engine, Hour meter showing 95 Hours,28" Dangle Head Saw, 3/4 " Bar and Chain, Enclosed Cab with heat Joystick Controls, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Bell Ultra T Tracked Feller Buncher, Duetz Engine, Joysticks. Nice Running machine.

Bell Feller Buncher 3 wheeler SN BCH28887 Runs good Swivel motor on head leaks a bit Rubber is weak

Bell Industries Circle Saw Grinders (2) Available

2015 Bell 6000 Firewood Processor -2048 hours -4.4 liter cat engine -Enclosed cab with heat but no A/C -8. 12. and 16 way wedge -8' live deck with 5.5' spacing -Runs and operates as it should

2015 Bell 6000 Firewood Processor, Includes a 32' Conveyor, ONLY 1,400 Hours, 60 Ton Wedge, Enclosed Cab with Heat, No AC in Unit, Caterpillar 100 HP Turbo Diesel Engine, Ready to Work Will take 40' Logs, 6 Way and 8 Way Wedges. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Bells 8000 Firewood Processor, Circular Saw, Engine has ONLY 1,100 Hours, Enclosed Cab with Heat No Air Conditioning, Wedges Include a 6,8,10,16, Has Conveyor from the rear to a Tumbler Screener, 7 Cords Per Hour, Has a 50' additional conveyor for $25,000.00 Ready for Firewood. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Bells Machining 8000 Firewood Processor -4895 hours -New box of teeth and saw tooth removal tool to go with machine!!! -Fully serviced and inspected by local CAT dealer -Has 32 ft conveyor that goes with it -Conveyor info: -New rims and tires -Had a wheel bearing seize on conveyor. They had it replaced, and rest of the conveyor was inspected. -All new metal on saw guard from Easton Made. Ready to go to work!!!!!!

Beloit ring type debarker, electric drive, working condition

BENCHMARK 205-HP3 Hot Melt Adhesive ApplicatorHot Melt Adhesive Applicator with: -- Bodine adjustable speed motor. -- Bead dispensing applicator. -- Also includes an extra Bodine adjustable speed motor regulator, for fine tuned glue application.

Benshaw 75HP Soft Start Mdl CBRDB6-124-12

Benshaw 200 hp. soft start