Equipment For Sale

SMW Horizontal Single Head Band Resaw w/Maximum Cutting Width 16", Maximum Cutting Thickness 4.5", Maximum Processing Thickness 8", Saw Wheel Diameter 24" and 20HP Motor

PE-1500 - SMW Double End 2HD Heavy Duty Trim Saw - Cuts 15 3/4"-59"L x 3/8"-15 3/4"W x 3/8"-4 3/4"T, 17 3/4"dia Saw Blade, Each w/ 6.5hp Motor, Feeds 99' per minute, 2000-3000 pieces per hour, Dual Feed 1hp Feed Motors, Dimensions 7' 6"L x 6'W x 4'D, Weighs ~3300lbs.

PB200 - SMW Wood Pallet Plywood Nailing & Block Cutting Machine - Automatic Feeding, Cutting & Nailing, Raw Lumber from 39"-118"L, Cuts from 1 1/2"-8"L x 1 1/2"-4 3/4"H x 1 1/24"-4"W, 13"-16" Cutting Blade, 2 Planer Blades, 1-3 Nailers, Touch Screen Control & Pneumatic Operation, 380V 3 Phase, 10hp Motor w/ Dual 3hp Feeding Motors, Dimensions 18'L x 4' 6"W x 5' 3"D, Weighs ~2650lbs.

DZ-450 - SMW Automatic Cut Off Saw - Cutting: 3/8"-4 3/4"H x 1"-8"W x 4"-8"T, 18"dia Saw Blade, 1/64" Cutting Tolerance, 4" Dust Collection Hole, 3000rpm Spindle Rotation Speed, 40 pieces/min, 16'-100' Feeding Speed, 6' 6"/13'/19' 6"L Feed Table, 47"L Discharge Table, Cylinder Press w/ 73"-102"psi, Schneider Electronic Components, Siemans PLC Touch Screen, 3 Phase 380V 50Hz, 1hp Servo Motor/11hp Cutting Motor. Also Available: DZ-600 - SMW Automatic Cut Off Saw - Cutting: 3/8"-5 1/2"H x 1"-12"W x 4"-12"T, 23 1/2"dia Saw Blade, 1/64" Cutting Tolerance, 4" Dust Collection Hole, 3000rpm Spindle Rotation Speed, 45 pieces/min, 16'-100' Feeding Speed, 6' 6"/13'/19' 6"L Feed Table, 47"L Discharge Table, Cylinder Press w/ 73"-102"psi, Schneider Electronic Components, Siemans PLC Touch Screen, 3 Phase 380V 50Hz, 1.5hp Servo Motor/15hp Cutting Motor.

ZHW800-70- SMW Gang Rip Saw - Saw from 3/8"-2 3/4"T x 31 1/2"W, 11"dia Saw Blade, 1-10 Blades, 29hp Motor. Also Available: ZHW800-80- SMW Gang Rip Saw - Saw from 3/8"-3 1/4"T x 31 1/2"W, 12"dia Saw Blade, 1-10 Blades, 40hp Motor. ZHW800-100- SMW Gang Rip Saw - Saw from 3/4"-4"T x 31 1/2"W, 14"dia Saw Blade, 1-10 Blades, 49hp Motor.

MJ1300G - SMW Gas Powered Horizontal Band Sawmill-Wide Cut - Cuts up to 51"dia x 12"T x 14' 9"L, 27 1/2"dia Saw Blade, 1 1/2"-3 1/8"W Blade, 40hp Motor, Machine is 19' 6"L,and ~4850lbs. Also Available in Electric. Also Available: MJ1300E - SMW Electric Powered Horizontal Band Sawmill-Wide Cut - Cuts up to 51"dia x 12"T x 14' 9"L, 27 1/2"dia Saw Blade, 40hp Motor, Machine is 19'L,and ~2875lbs.

SMW Ultra Portable Horizontal Band Saw 26" cutting diameter, 10' cutting length, Max cutting thickness 19", Blade Size 12' 6" X 1 3/8", Machine length 13' 6", ~1100#, Packing Dimensions 7' 3" X 3' 3" X 5' 3". Available in 9hp Gas, 10hp Electric, or 8hp Diesel

EG600E - SMW Double Blade Board Edger - Saws up to 2"-24"W x 3/8"-2 3/4"T, 2 14" Saw Blades, 65'-80'per minute feed, Dual 10hp motors. Also available: EG800E - Saws up to 2"-32"W x 3/8"-2 3/4"T, 2 14" Saw Blades, 65'-80'per minute feed, Dual 10hp motors. EG1000E - Saws up to 2"-39"W x 3/8"-2 3/4"T, 2 14" Saw Blades, 65'-80'per minute feed, Dual 10hp motors.

5 HP motor with 8" or 10" blade cap. -- Features: SawStop Safety System, blade stops and retracts on accidental contact, protection is always on, performs continuous self checks, invisible protection, does not interfere with work, compatible with all standard blades; works on all woods and non-conductive materials. -- Includes bypass switch for cutting metal. European style riving knife to minimize kickback; Low profile blade guard for narrow cuts; Quick-change mount for guard and riving knife ÷Large start/stop paddle for hands-free shut off; Main power switch with removable lock-out key; Magnetic contactor motor control; Blade shroud for improved dust collection; Zero-clearance insert; Extra heavy castings ÷Widely spaced trunnions; Infinitely adjustable trunnion assembly for precision alignment. -- Also includes: Vertical slide blade elevation for increased stability; Long-lasting V-ribbed belts; cast iron handwheels; Two access doors in cabinet; Powder-coated cabinet.

SAWSTOP - ICS 73230, ....Table Saw w/Safety "Stop Feature"Specifications: -- 10" Blade cap.; 7-1/2 HP motor; 3-1/8" depth of cut @ 0°; 2-1/4" depth of cut @ 45°; 13/16" max. dado width; 5/8" arbor dia. -- Features: -- Enclosed cabinet; Heavy-Duty belt drive; cast iron trunnions; SAWSTOPS's revolutionary flesh detecting safety mechanism. -- Includes: -- 52" "T-Glide" rip fence system; side support table and laminated top; 4" dust collection port; magnetic contractor motor control; main power switch with removable lock-out key. Actual model is: "ICS 73230"

SCHELLING FM-430/410 CNC Front Load Panel SawSpecifications & Features: 169" (4292 mm) Cutting length & 165.3" (4,200 mm) pull back, 3.75" (95 mm) max. saw blade projection; 25 HP (19 kW) 4,100 RPM main & 3.4 HP (2.5 kW) 5,600 RPM scoring motor. -- Equipped with: Variable saw carriage travel speed from 0 - 278.8 FPM (85 MPM), constant return of 278 FPM (85 MPM). -- Electronically controlled overhead program fence with rack & pinion driven on both sides; forward speed from 0 - 278 FPM (85 MPM), return speed of 278.8 FPM (85 MPM); equipped with (8) gripper clamps (open up to 5" (130 mm). -- Features: SCHELLING "COMPOSER" IBM-AT Compatible Computer Control; aftermarket color monitor (displays cutting dimensions and patterns w/moving graphics) , self-diagnostic, data input by keyboard; onboard optimization program. -- Complete with: 2-3/4" to 87" (2,200 mm) Long side/cross-cut aligning zone, (1) aligner in front & (1) behind the cut line. -- (3) Front mounted air float tables for moving panel from rip section to the cross-cut section, (2) movable and (1) fixed; each with their own blower. -- Rear of machine fully enclosed for safety with man-height sheet metal panels & wire screen windows. T

SCHELLING FXH 430/410 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications:169" (4,300 mm) Cutting length & 167" (4,250 mm) pull back; 3.9" (99 mm) max. saw blade projection, 23 HP (17 kW) main & 3.5 HP ((2.6 kW) scoring motor. -- Saw Carriage: Electronically controlled saw carriage with rack & pinion drive; variable travel speed 1 - 394 FPM (1 - 120 MPM), constant return of 394 FPM (120 MPM). -- Pusher Fence: Electronically controlled overhead pusher fence, rack & pinion driven on both sides; (9) Gripper clamps that open up to 3.5" (90 mm). -- Forward speed 0 - 262 FPM (0 - 80 MPM), return speed 262 (80 MPM) FPM; travel via brushless AC Servo Drive -- Operator & Machine Control:PC Front-end with Schelling "MCS" + Windows "NT" operating system.17" Color display with SVGA resolution (displays cutting dimensions & patterns w/moving graphics); virtually unlimited storage capacity, standard keyboard & mouse.Ethernet card; 128 MB Ram, 56K modem. Integrated graphical self-diagnostic, remote diagnostics by the factory is possible via dedicated phone line; data input by keyboard or possible direct downloading from office PC.SCHELLING "MCS" software displays simulation of patterns before actual cutting; graphical representations of cut-to-size parts in production shows the operator what to do in "real time". -- Complete with:2,300 mm Long crosscut fence (front-to-back), (2) automatic side/crosscut aligners for up to 87" (2,210 mm) crosscuts, (1) in front & (1) behind pressure beam cut line.(3) Front mounted air floatation tables, each table 24" x 83" (609 x 2,108 mm), rear of machine fully enclosed for safety with man-height safety fencing. -- Actual Model is SCHELLING FXH 430/410

Schneeberger 9 Sculptor Profile GrinderSwiss Made, Schneeberger Automated High Precision Grinder for Finger Joint, router bits, saw blades, straight and milling Cutters. Specifications: -- Grinding Motor: 1,500 - 3,000 RPM. -- Cooling Pump: 2,800 RPM. -- Grinding Wheel Speed: 3,000 - 6,000 RPM. -- Grinding Wheel Diameter: 50 - 200 mm. Grinding Wheel Bore: 30 mm. -- Cross Travel of Grinding Wheel: 200 mm. Vertical Travel of Grinding Wheel: 400 mm. -- Grinding Head: Swivel-able. -- Worktable Travel: 400 mm. -- Coolant Capacity: 25 liters.Dimensions: 1,226 mm length x 1,160 mm width x 1,180 mm height; Weight - 320 kG.10" Width cap., 11.5" dia., max. profile depth 5.5", radial clearance angle up to 35ø, lateral clearance angle up to 15°Equipped with & Features; -- 2 HP - 1,500 RPM motor, variable grinding speed 2,000 - 4,000 RPM, three-sided full jet cooling. -- All std. grinding equipment for HSS grinding, 1-1/2" spindle arbor, (2) wheel flanges, (1) knife holder, and dresser.

Schuetz Tool Bladder Press Specifications: (2) Shuttle tables, approx. 55” x 106” press capacity. Hot air design with 3mm silicone membrane to press veneer into profile, typical cycle time 3 minutes using proper glue that sets at 200°F. Can use PVA which would extend cycle time to approx. 15 > 45 minutes depending on the actual glue mix used to achieve 80%+ cure strength. Includes Hydraulic Pump. SPECIAL NOTE: Fully operational, however, need 4 or 5 heating rods replaced, new rod parts are included for you to install ( don't have the capability to remove them). The current average operational temperature is 150° F. NOTE: Above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

--In Auction--Starting bid: $100-- Schuetz Tool Bladder Press Specifications: (2) Shuttle tables, approx. 55” x 106” press capacity. Hot air design with 3mm silicone membrane to press veneer into profile, typical cycle time 3 minutes using proper glue that sets at 200°F. Can use PVA which would extend cycle time to approx. 15 > 45 minutes depending on the actual glue mix used to achieve 80%+ cure strength. Includes Hydraulic Pump. SPECIAL NOTE: Fully operational, however, need 4 or 5 heating rods replaced, new rod parts are included for you to install ( don't have the capability to remove them). The current average operational temperature is 150° F. NOTE: Above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

10D G60 thin kerf double arbor schurman gang edger; this item belongs with stock #729, which is also listed in our equipment for sale. Call Jeff at 574-370-5050 for more info.

Shurman 6SBA 42 S/N 1171 Gang Edger with 150Hp Motor

6"x42" wide overall, includes infeed and outfeed rollers, working condition

Schurman 6TA48 Combination Edger SN: 2121 3 phase 480 volt (2) 200 HP motors

Schurman Gang Saw Infeed Positioner