sawmill Equipment For Sale
.gif)
3711 Results Found
Call for Price
1989 Nicholson A-5 22" Ring Debarker w/ Self Leveling Infeed, cab, Controls S/N 5930, 42' Barn Sweep, Package or Separate Your choice.
Call for Price
Nicholson A5 Ring Debarker Ring already removed from the machine. May have a Cambio Indeed/Outfeed as an option
Call for Price
Nicholson A5A 27" Dual Highspeed Automatic Ring Debarker w/Controls S/N 6326, 3Hp Hyd Power Pack, 3 Phase, Automatic Lubricating Systemw/(2) 250 Gal Reservoir w/Lubricating Oil
Call for Price
2007 Nicholson A6 35" Ring Debarker S/N N7555
Call for Price
Approx (7) pallet of parts for a 22" Nicholson A7 Debarker from a GP plant.
Call for Price
2018 Nicholson A8 22" RH Tandem Ring Debarker
Call for Price
Nicholson 26" Ring Debarker
Call for Price
Nicholson A-5 22" Ring Debarker
$ 1,200
Call for Price
3 phase, 110V, will grind 24" - 30", will do alternate bevel, good condition
Call for Price
NORDFAB NFK Series Modular Dust Collector with (8) Modules, reverse air cleaning and drag chain unloading into a Rotary Air Lock (RAL) --23,000 CFM approx. capacity based on filter area and desired Air to Clothe Ratio. With 50 HP. + 40 HP (was used as a transfer blower) Consisting of (248) filter bags of 8.7" dia. x 77.2 " long(220 mm x 1,960 mm long) also (8) filter bags of 8.7" dia. x 54.1" long.(220 mm x 1,375 mm long) - located at cleaning fans - for a total of 3,680 sq. ft. of filter area. -- Consists (8) modules and (1) inlet blank module. Fan inlet approx 26" dia. -- Bottom conveyor chain with scrapers carrying the dust to one end and fed into the RAL -- Includes NRS-10 Rotary Air Lock and Transfer Blower to convey the dust to an enclosed waste container (not included). -- Electrical control panel with starters included. -- Overall dimensions 32' long x 7.5' depth x 13.5' high (without support steel)., Approx weight 10,000 lbs. --Actual model is NFK 8AJ/1BL
Call for Price
Nordfab Air Blower with 40HP Motor
$ 69,000
.jpg?width=300&height=200&mode=pad)
Northern Automation Lumber Stacker with Lift Table. 3 phase. 36"-192" capacity. #C935
Call for Price
16 HP 12 filter bags up 4 collection bags lower Lots of pipe
Call for Price
Has (2) Blades Will cut up to a 12 x 12" Powered by (2) 20 HP 460 Volt 3 Phase motors Runs (2) 1 1/4" band blades Excellent Condition, (new condition with less than 4 hours use).
$ 8,500
The HD36 Norwood Band Mill is a used band mill tailored for precision and efficiency. It is equipped with a 1 1/2" band saw, allowing for precise thin kerf cutting. The mill offers a generous cutting length of 16 feet, suitable for large-scale lumber milling tasks. It is powered by a robust 23 HP Briggs gas engine, ensuring dependable performance during demanding operations. This model operates entirely manually, giving users full control over each cutting session. The mill is in good working condition and has been maintained to ensure continued reliability. Ideal for those in need of a cost-effective solution for their lumber processing needs, the Norwood HD36 is a dependable choice for both hobbyists and professional sawyers alike.
Call for Price
Norwood LumberPro HD36 23hp (627cc) B&S V-Twin OHV electric start gas engine , 4 ft. bed extension for 16 ft. total , log rolling ramp, auto dog assist. Used as hobby mill - low hours. Includes any new blades available jack stands for levelling Stationary now but can easily converted to mobile.From Mgf.
Call for Price
Nova Dry Kiln 26’ wide x 25’ deep holds 5500-12000 board feet propane or Natural Gas fired
$ 47,500
NOVA TTF-6200 Dry Kiln System; Unassembled Front Load Kiln Designed to hold 5,100 bd. ft 4/4 Lumber, or 6,120 bd. ft 8/4 Lumber, Using 3/8" (9 mm) stickers. -- Specifications: Interior Dimensions: H 10' 3,5" (3.14 m), D 7'2"(2.19 m), W 25' 3" (7.7 m). -- Loading Door Opening: H 9' 10" (2.85 m), W 25' 3" (7.7 m). 1/8 " Aluminum sidewall bumpers, side hinged doors, exterior installation. -- Average 4/4 capacity: 5,100 bd. ft (12 m3) with 3/8" (9 mm) stickers. -- Average 8/4 capacity: 6,120 bd. ft (14 m³) with 3/8" (9 mm) stickers. -- Price shown is for kiln only. -- High horsepower heat requirement: 128 k BTU/hour. -- Heated Floor System, manuals and blueprints. -- Electrical Requirements: 230 VAC, 1 Phase, 60 Cycle, 25 kw/Hr max.