Equipment For Sale

MAYER - PS 80P: Front Load, Automatic Panel Saw -- Specifications125.9" (3,200 mm) Cutting length & 122" (3,100 mm) pull back; 3.14" (80 mm) max. saw blade projection.12 HP (9 kW) Main saw motor; 320 mm main saw blade (3,800 RPM); 30 mm bore dia.; 1.5 HP (1.1 kW) score blade; 150 mm (8,680 RPM); 30 mm bore.Electronically controlled saw blade height adjustment; electronically controlled scoring blade horizontal (side-to-side) adjustment; "QUICK CHANGE" main & scoring blade system. -- Saw CarriageInfinitely variable forward cutting speed from: 5 - 262 FPM (1.5 - 80 MPM); constant return speed of: 262 FPM (80 MPM).Automatic cutting length adjustment; rack & pinion drive (not chain); AC Servo motor drives on the saw carriage with rack & pinion on hardened & ground guideways. -- Pusher FenceElectronically controlled overhead program fence; forward speed: 0 - 82 FPM (0 - 25 MPM); return speed:196 FPM (60 MPM); fence retracts: 122" (3,100 mm) Behind cutting line; AC Servo motor drives on the pusher fence with: Rack & Pinion on hardened & ground guideways.(6) Material gripper clamps open up to: 80 mm (3.1"); (3) Are closely spaced in crosscut area; the other (3) are at equal distance in rip cut area. -- Operator InterfaceMAYER "PC 5400" + Windows Operating System with: "REAL TIME" graphic display; 14" Color monitor mounted in a pivoting console.3-COM Network interface: 10/100 MBs with RF45 (TP) connection; (2) serial, (1) parallel interfaces, and SVGA graphics adapter; data input by keyboard or downloading from office PC is possible.PC 5400 Control System features: Automatic cutting length (material is scanned by sensor underneath the packet on the saw bed); electronically controlled automatic cutting height adjustment (also can be used for grooving by entering depth and width of groove at control).Automatic trim calculation: Constant display of remaining material in both axis during programming (eliminates need for operator calculations during programming). -- Complete with:Left angle crosscut fence: 78.7" (1,999 mm) long;, automatic crosscut aligner from: 3/4" - 47.2" (19 - 1,199 mm) with automatic presetting.Rear slotted pressure beam to minimize offcut; (3) front mounted air flotation tables: 79" x 24" (2,000 x 600 mm); segmented transparent plastic safety guards on front of pressure beam; wire mesh screen enclosure around rear machine table. -- Actual model - MAYER PS/80P/3200

2012 McCloskey I-44 Impact REDUCED -Around 9K hours -360 Horse Power -41.3 x 44.3 Impact Rotor

2017 McCloskey I-34R -3400 hours -Tracked unit -Belts are good -Everything works as it should

2 DECK 6 X 20 SCALPER

1995 McCloskey 833 Trommel -9000 hours -Meter might be faulty -Engine runs strong -Needs -Drum chain -Feed conveyor drive chain -Batteries

2008 McCloskey 412 -2500 hours -New brushes -Fluids been flushed -New coat of paint -Swivel Conveyor -Smaller job trommel

1995 McCloskey 621 Trommel Screen -6634 Hours -Tight and dry -Belts are good -Hoses are good -1/2 inch screens Only was used for leaf and compost

2013 McCloskey J50 Jaw Crushers -10,780 hours -Cat engine -New main belt -Recent replaced tail pulley, rollers -Hopper has been relined Ready to work!!!!!!

2019 McCloskey I34R -1500 hours -950 crushing hours -Track machine -Tight and dry Turn Key unit !!!!

(2) McConnell 40-50 MM BTU Gas Burners available

McCormick Inline Metal Detector with Controls

Used, good condition - Call Jeff for more info at 574-370-5050 $32,000

NEW UNUSED McDonough 54" Horizontal Resaw w/Infeed System and Optimized Linear Edger

McDonough 62" Horizontal Resaw Guides and guide cutter included System is still installed and ready to be removed.

McDonough 54" Horizontal Line Bar Resaw w/Runaround

McDonough 54" Resaw Complete Run Around system Controls and electrical Already dismantled and ready to load.

Used McDonough 54" Tilting Rollfeed Resaw. Resaw has been reconditioned. Mechanical strain. Non-rotating upper wheel shaft with bearings mounted in wheel. Top wheel is 7/8"-thick at edge of rim and has 7-1/4"-wide face. Feedrolls driven by variable speed hydraulic motor for speeds 40-220 FPM with hydraulic power unit. Wheel drive is 50HP 440-volt motor. Maximum stock size is 18"-wide x 24"-high. Will tilt up to 15º for bevel sawing. McDonough Style Cartridge Pressure saw guides with saw spray attachments. Will either center split or gauge saw. Air-operated roll opening controlled by operator's foot pedal. Inventory No. 12409C. Price, FOB Portland, OR --------------------------$29,500.

6 foot band head with a horseshoe runaround

Weight strain

Weight strain