Equipment For Sale

2017 Morbark 6600 Horzontal Grinder with 7,600 hours, Cat C-32 Engine, 1050hp, 5th Wheel, Radio Remote, Magnetic Head Pulley. Weight: 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Morbark 6600 Horizontal Grinder, Cat C32 1200hp with 5,596 hours, Radio remote, Magnetic head pulley. Weight: 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Morbark 1300 Tub Grinder, Cat C27 1050hp with 7,400 hours, Air Compressor, Loader, Magnetic head pulley. Weight 88,000 lbs Height 13' 6" Width 11' 11" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Morbark 40/36 Drum Chipper 7400 hours. John Deere 600 HP engine , It has been through shop completely. Width: 8'6" Length: 37'5" Height: 12'4.25" Gross weight: 52,500 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Morbark MXG42 Wheeled Stump Grinder, 399 Hours.

2016 Morbark 6600 Track Horzontal Grinder, Cat C32 1200 hp with 10,022 hours, Radio Remote, Magnetic Head Pulley. Work done. 5/23 fan pump replaced $8000 6/22 poclain feedwheel motor replaced. $20,000 4/24 Fan bearing replaced. $2000 5/24 yoke cylinders rebuilt. $500 5/24 new belly belt and all new parts associated with except the pulley drum. Shaft, b-locs and bearings replaced. Also metal siding and skirt. $8-10,000 6/24 2 new turbos. $12,000 6/24 new fan motor and side load adapter. $6500 6/24 feedwheel bearing replaced. Possibly shaft. $1500 6/24 discharge bottom bearings replaced Work done to infeed floor. Belly belt motor rebuilt. 3 injectors have been replaced. 2 out of 3 wiring harnesses replaced. Rebuilt fan motor. Has newer grates. (2) 8” hex. (2) 7x16 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Morbark M18R Drum Chipper, 200 HP John Deere with 4,900 hours, Hydraulic front jack and discharge chute, 5000lb winch, Manual rear outriggers. Gross weight: 11,000 lbs Length:21 ft 2 in Width:7 ft 7 in for single or tandem axle, 8 ft 5 in for single axle dual wheel Height:9 ft 6 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Morbark M12R chipper, 12" capacity chipper, 89 HP GM gas engine, live hydraulic pump, auto feed, twin crusher cylinders, hand crank swivel discharge, excellent tires, new knives, fresh service, ONLY 410 hours! Gross Weight (approximate): 6,400 lbs Length: 13'9" Width: 6'3" Height: 8' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 Morbark Mountain Goat 30/36,Whole Tree Chipper, has a Caterpillar 575 HP, 325 Undercarriage Which is 80-85%, Enclosed Cab with Heat and AC, New Updated Drum with 1.000 Hours, Morlift 250. Loader, Rebuilt Pumps, New Hydraulic Pump, Hydraulic Oil Cooler and Fan, Ready for the Woods. Length 31' 6" Height 12' 5.5" Width 8' 5.25", weight 36,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Morbark 640 Debarker S/N 1150 with 100hp Motor, Operator Cab, AC Unit with Morbark 20' Infeed Log Trough, 25' Outfeed Log Trough with Offsetting 2 & 3 Arm Log Sweeps, Ladder Back Chain, Hyd Drive, 58' Barn Sweep Conveyor, Clockwise Rotation, Electric Drive and 6' x 20' 2 Strand Log Deck & Hyd Drive

The complete Morbark debarker setup offered includes essential components for efficient log processing. It features log troughs that are fully hydraulic, with dimensions of 54" x 25' and ladderback chain. The hydraulic drive, along with a feed roll head, ensures smooth operation. The outfeed log trough is also fully hydraulic, complemented by a 26' hydraulic barn sweep equipped with 12" paddles for effective material handling. A Choremaster hydraulic barn sweep and a substantial 36" x 32" x 33" hydraulic tank with a pump are included for robust support. An 80" x 10' x 82" cab, accessible via steps, offers protection and visibility for operators. Critical to its operation is the 60 series Detroit diesel engine with 16,758 hours logged, providing reliable power. A 275-gallon fuel tank is included, although it may have a small leak that should be addressed. This used debarking setup is suitable for forestry and sawmill operations requiring dependable machinery to handle large-scale debarking tasks efficiently. For any inquiries or further details, interested buyers may use the alternate contact number provided, 607-438-7948.

2007 Morbark 40/36 Whole Tree Chipper, 600hp Deere with 8994 hours, A3 Drum, Light package, Remote, Rear stabilizers. Length 37'5" Height 12'4.25" Width 8'6" Weight 52,500 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Morbark 23NCL Whole Tree Chipper, Cat C27 800hp with 6,500 hours, 3 knife 3/4 chip, Radio Remote, Tether Remote. Length: 31'6" Height: 11'6" Width: 8'4" Weight: 36,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Morbark 6- knife 58" dia chipper, includes 6' x 6' shaker screen and cyclone, good operating condition

Morbark 640 debark complete line, includes infeed/ outfeed troughs, operating cab and all controls, this unit is set up to run with all hydraulics, complete and ready for production

1995 MORBARK MODEL 20 TREE CHIPPER 7,381 TOTAL HOURS CAT 3406 425 HP ENGINE CAB JOYSTICK CONTROL LOADER $5K WITH EXTRA HARDWARE AND KNIVES VERY GOOD CONDITION WORK READY FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT

Factory reman 2009. Great shape ready to work

1993 Morbark 1000 Tub Grinder -Hours unknown -3406B CAT engine 425 HP -No blowby -Rods and spacers been replaced with oem parts -Clutch new -Hammers new Turn key good little grinder !!!!!!!!!!!

Morbark Series 1000 Stac Trac

2022 Morbark 3000XT Horizontal Grinder -500 hours -(C-15) 600 H.P -Like new unit