Bliss Industries For Sale
.gif)
3596 Results Found
$ 14,000
.jpg?width=300&height=200&mode=pad)
12" Baker BBR-O Single Head. 30hp Motor. Located in IA. #C968
Call for Price
.jpg?width=300&height=200&mode=pad)
Call for Price
12" capacity 25HP motor 460 volt 3-phase
$ AUCTION ITEM
$ AUCTION ITEM
#100 • 1999 Baker BBS-O Bandmill -- Specifications -- Year: 1999. Make: Baker Products. Model: BBS-O. Serial #: 2K-128. (for logistics) Weight & Height: “96”x33’x102” high. Cut Capacity: “32”x ‘16’. Meter Reads: unknown. -- Features -- Control System: Stationary. Debarker: yes. Hydraulic: yes. Laser Sight: no. Log Capacity: “36”. Lubrication System: yes. Powered by: 38 horse Kabota. Setworks: no. -- Seller Statement -- Hitch but no axles. Set up as stationary. Extra fuel tank. Air starter for diesel. Hoses connected to mill included. Extra blades. Skid of mill parts. Extra hydraulic tank.
$ 10,500
.jpg?width=300&height=200&mode=pad)
Baker C Resaw with Return. Located in NY. #C929
$ 35,900
2018 Baker Model C 4 Head Resaw Well maintained Work ready Only selling to go to a smaller unit SN 18-4895
$ 57,500
BAKER C 4-HEAD Horizontal Resaw w/Powered Return6" Wide x 12" high cap. Resaw; standard spring blade tensioning system;Specifications: -- 13'-2" x 1-1/4" x 0.035 blade provides thin kerf savings; quick & easy blade height adjustments. -- Wheels: 28" Dia. CNC machined, dynamically balanced, all-steel band wheels, (4) bolt flange; rough top feed belt combines with opposing side feed rolls and air pressure hold over rolls; idler hold downs . -- (4) 20 HP Total Enclosed Fan Cooled Motors; Thin-kerf technology and the Baker Low Profile Flat Guide System generates up to 60-70% less sawdust and up to 25% more boards, easily out-producing a gang rip. Complete with: -- Hydraulic variable feed speed from 20 to 120 FPM (6 to 36 MPM) with a tank, flow control and remote feed shutoff; powered side feed rolls. Includes: -- Powered conveyor, powered return conveyor, NEMA electrical panel with the starters, motor overload protection, remote start/stop stations.6" x 6" Square dust collection with a 90° adapter chute to a 4" dia. outlet (can be rotated in (4) directions); 600 CFM required for each drop.
Call for Price
Baker Band Resaw Return conveyer 480 volt 3 phase 6" x 12" capacity
Call for Price
Single head Baker resaw | 3 Phase 480V | 30HP | Capacity is roughly 6" wide x 6" tall
Call for Price
Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide
Call for Price
Baker Side Transfer Belt - Hydraulic drive, 5 1/2" x 40" side shift belt, 24" x 5', 21" belt.
$ 7,500
Call for Price
Brand new...never used...still on the original pallet.
$ 65,000
1992 Baker 6 Head Resaw Six-Head "C" Saw 1 needs a spindle and wheel replacement. Approximately 8,320 Hours Serial Number 92-379 6 Motors (30) HP (37) Amps Mechanical Drive
Call for Price
Baker Furnace Dry Kiln 110volt 3 phase Excellent condition
Call for Price
Baker PAQ Resaw Good Working Condition
Call for Price
Baker Furnace Dry Kiln 110volt 3 phase Excellent condition
Call for Price
Model 3650E with Baker (3) Strand Infeed Deck Excellent condition Hydraulic over electric general factory networks. Hooked up to power and ready to be demonstrated.
Baker Dominator 3650E Sawmill Edmiston Edger Morbark Chipper with diesel engine All decks and rollers
$ 12,500
Baker single head resaw, Model; BBR-O, Serial#; 04-3371, has tilting infeed belt w/ digital display, electric drive, includes spare parts/ blades, excellent condition
