Equipment For Sale

Giben WNAR6 Series Twin Pusher Angular Panel Saw Cutting length rip cut 3200 mm Cutting width cross cut 2200 mm Projection height 95 mm Lateral loading lift table with direct motorized infeed and right motorized infeed 2200 mm width interior panel turning station in the rip cut section Book aligners for both long and short rip stacks 17 material clamps Split pusher in the cross cut area

Selco WNT 200 Rear Load Panel Saw S/N 400.066.94

SELCO WNT 7/730 REAR LOAD, AUTOMATIC PANEL SAW -- Specifications: 177" (4,500 mm) Overall cutting length, 5" (127 mm) max. saw blade projection, 29 HP (22 KW) main & 3.5 HP (2.6 KW) scoring motor. -- Saw Carriage:Variable saw carriage speed from 0 - 606 FPM (0 - 185 MPM), return speed 600 FPM (185 MPM); Rack & pinion drive, driven by AC brushless Servo motors. -- Pusher Fence:Electronically controlled overhead program fence with (8) pneumatic gripper clamps (open up to 5" / 128 mm).Forward speed of 295 FPM (90 MPM) & return speed of 295 FPM (90 MPM); rack & pinion drive, driven by AC brushless Servo motors. -- Operator & Machine Control:PC front end with Selco "OSI" + WINDOWS "7" operating system with easy programming of very complex cutting patterns.15" Flat screen monitor displays REAL-TIME graphics of cutting dimensions & patterns, program cutting list, manual cuts, diagnostic & on-line help.Data input by industrial keyboard & mouse, floppy disk or CD; direct downloading from office PC is possible.OSI (Open Selco Interface) guarantees fully automatic management of cutting patterns by optimizing all machine movements (pressure beam, saw carriage and side aligner pusher positioning, etc.).The numerical control adjusts the optimum saw blade projection for the stack of panels being cut and sets the most appropriate cutting speed, in relation to the stack itself and, when necessary, to the width of trim cut too. -- Rear Load Lift Table:Automatic lift table 173" x 87" (4,400 x 2,200 mm), 12,000 Lbs (5,455 KG) lift capacity.4 HP (2.3 kW) Motor for raise-and-lower, encoder-controlled guide rods for automatic book height adjustment; 28.7" (730 mm) max book height w/o a pit or risers. -- Rear of machine:(3) Lateral aligners to accurately position book of panels on rear table prior to cutting.Rear modular roller support rails with 80 mm dia rollers; rear of machine enclosed for safety. -- Front of machine:Automatic side/crosscut aligning device located inside the pressure beam aligns the panels against the right angle fence prior to cross-cutting, 2.4" - 87" (60 - 2,200 mm) stroke.90" (2,300 mm) Long crosscut fence (front-to-back); (4) Front mounted air flotation tables with rounded fronts 26" x 81" (650 x 2,050 mm). -- Complete with: "Quick Change" saw blade system; "DIGISET" electronic scoring adjustment; Selco "Quick-Opti" optimizing software; CP link. -- Options Include:173" x 87" (4,400 x 2,200 mm), LH facing, rear in-feed/out-feed conveyors with fork cut-outs that allow for staging/loading/unloading from the Rear LH side of the machine. -- Actual Model is SELCO WNT 7/730/4500.

Selco WNT610 Rear Load Panel Saw Biesse Winstore Material Handling System This system is already dismantled by a technician and ready to be shipped. Installation can also be provided.

SELCO - HL-12-LH: Horizontal Baler with Infeed Conveyor• Motor: 20 HP. • Main Cylinder: 6";.• Hopper Opening: 50"; x 28";.• Cycle Time (No Load): 15 Seconds.• System Pressure: 2,000 PSI.• Total Compression Force: 56,556 Lbs.

A Select band mill in operation with the band sharpener in good condition. Has extension for cutting timber up to 52' long. 125 hp. John Deere 4045 engine with 4300 hrs. Sharpening equipment. Lots of spare parts, trailer package. You can see it in operation.

2019 Select Sawmill Model 4221 Double Cut 6" Blade 75 HP Electric Motor (600 V/3PH) Includes: Mill, log deck, home built lumber outfeed chain (needs repair) Owner says it is time to grind band wheels again.

Select 4221 Double Cut Band Sawmill 115 HP John Deere Diesel 6" Blades 5 Brand New Blades

74 hp Ecomax T4i turbocharged interim Tier 4 Perkins Diesel Engine. Lift Capacity of 6000 lbs.149 inches overall length without forks. 77 inch Forks. 89 inches overall width. Height to top of overhead guard: 85 inches. 6 inches of mask side shift. 45 degree mask tilt forward. 12 degree mask tilt backwards.

MLS Number 13417059 2018 Sennebogen 840R-HD Track Log Loader 12723 hours All lights and gauges work No cracks nor welds on main frame No damage to cab No leaks Grapple in good condition and works properly 35' boom 23' arm 32" shoe

4560SHD grapple, live heel, hydraulic cab lift with cab riser, cat walk, 32” triple grouser pads, serviced and ready to work

4560SHD grapple, live heel, hydraulic cab lift with cab riser, cat walk, 32” triple grouser pads

4560SHD grapple, live heel, hydraulic cab lift with cab riser, cat walk, 32” triple grouser pads

4560SHD grapple, live heel, hydraulic cab lift with cab riser, cat walk, 32” triple grouser pads, new engine, like new u/c.

2018 Sennebogen 840 Excavator with 12,723 hours on a QSL9 Diesel engine. Boom Length 35', arm Length 23', and shoe width 32". Combo Hydraulics. Machine is in good condition overall, no significant leaks of any kind. All oil compartments are good and all grease fittings are taking grease. Engine starts easily and has no unusual noises or smoke. All hydraulic functions are working as designed. Machine travels well and has no feeling of loss of power. It is in good condition and working properly. More pictures available. Weight 116,845 lb Transport length 53.14' Transport height 21.82' Transport width 11.48' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Sennebogen 835 recently refurbished

2018 Serco 75 XR, 22'x3' extenda boom, all cylinders rebuilt, various grapple configurations available. $23,500

ROTOBEC 4542 RT252 (SN:126569-2-1) 23' BOOM

ROTOBEC 4542 W/ RT252 (SN: 131824-7-1) 25' BOOM NO-CONTINUOUS SWING ROTATION TRUCK MOUNT

1994 Serco 170A Log Loader, John Deere Engine, 5th wheel Trailer, Saw Package, CTR 42-1A Saw, , was using daily, Reduced Price!! A Deal!