Equipment For Sale
10062 Results Found
$ 55,000
This 2018 Western Star 4700 is powered by a DD13 Detroit engine with an Allison automatic transmission, and 40,000 lbs rear ends. It has 11r24.5 tires on it. The truck has 521,866 miles. The truck is work ready, extremely well taken care of, and not one problem at all. If interested in this truck call Gavin 601/394/7796 Tim 251/366/3237 Kameron 251/242/5493 The truck is located in State Line, Mississippi, 467 St Peter St, 39362
$ 35,000
2002 WESTERN STAR LOG TRUCK SELL WHOLE OR PART OUT UNKNOWN MILEAGE 2003 SERCO 8500 LOADER CAT C15 475HP 18 SPEED FRAME IS BAD NEAR LOADER REAREND IS OUT OF FRONT PIG
$ 119,000
2006 Western Star 4900 Log Truck, Cat Engine, Barko 80XLE Loader only a few years old. Clean good running truck.
$ 180,000
2016 Western Star Glider -390,000 miles -C15 -18 Speed -2124 Prentice Loader Tons of extras with truck -8 drives 2 tag and 2 steer tires -1 front axle -2 full rear axles -2 air cleaners that are extras
$ 410,000
2019 Western Star 4700 SB Grapple saw truck -34,000 miles -Copma 450 knuckle boom crane reach of 106’ straight vertical -Comes with sg160 and sg280 Mecanil saw heads -Have extra bars and chains for each -Up to date annual boom inspection and also dot inspection
$ 4,500
Call for Price
Brand New Whirlwind blowers in stock, 8" -14" inlet, AR-400 steel and Dodge bearings, heavy duty built, call with your needs
Call for Price
//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i61 WHIRLWIND 1000 L Upcut Saw Specifications: 2-3/16" x 8-1/4" Cap., 14" blade cap., 3,450 RPM, left-hand unit feeding from right-to-left, 5 HP BALDOR motor. Complete with: (5 - 90) Cycles/Min; magnetic starter with low voltage controls, air filter, regulator, coalescing filter, and 4" dust chute. NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.
$ 8,500
WHIRLWIND 1000 R 14” Right-Hand Semi-Automatic Pneumatic Upcut Saw Specifications: Cutting cap. 2-3/16" x 8-1/4". Work area 12” x 22” x 36-1/2” H. Arbor dia. 1”. Blade speed 3,450 RPM. Cycle speeds 5 - 90 Cycles/Min. Equipped with: 5 HP - 1,740 RPM - 208 - 230/460 Dual voltage motor. 20-1/2” L x 1/2” H” Aluminum fence. Built-in foot pedal control. Complete with: TIGERSTOP “TS-10” 10' L Automated Material Pusher/Stop, S/N 1016705, with Overall length 12', 10” W x 12’ L x 36-1/2” H, Solid pusher/infeed table, 14-1/2” W x 10’ L x 36-3/4” H Solid outfeed table with 12’ L x 1-1/4” H Aluminum fence with scale, TIGERSTOP “CON5” Controller, with LCD Display, Touchpad, “VPK2” Software package (Optimization, Download, & Ethernet Connection), & TIGERSTOP “AMP5” Amplifier. Saw with Pusher/Stop Dimensions: 318” x 27” x 63” H. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.
$ 3,200
Call for Price
Whirlwind Sawdust Blower 36" fan 8 paddle fan 18" inlet reduced down to 17" 16" outlet
$ 4,500
MLS Number 11436962 Whirlwind 212 R Pop Up Saw 18” Blade Envelope Pressure 250 psi 10 HP Motor Air Operated Holddown 4" Diameter Dust Chute Maximum Cutting Cycles Per Minute (Approximate): 45 – 50 Cutting Capacity 4? x 10?, 2? x 12?, 1? x 13? Approx. 2,500 pounds
Call for Price
Whirlwind Mod. 1000L left hand defect saw w/stop & 7in x 8ft infeed rollers s/n S3074198L
Call for Price
$ 2,995
Call for Price
Call for Price
Call for Price
Call for Price
Several Whirlwind Up Cut Saws Blade Capacity: 14? Cutting Capacity: 2-3/16? x 8-1/4? Motor HP: 5 Electrical: 230/460V/3PH
$ 2,750
Whirlwind up-cut chop saw, 2-3/16" x 8-1/4" cutting capacity, electric drive, air power for blade movement, good working condition