Equipment For Sale

Klamath 7' Band Mill Model: BS-72 S/N:671

Wheel for Klamath 6' Resaw

$50,000 - $88,800 Needs Assembly - We can Assemble or Buyer May

2016 KMC 2100 Skidder, Includes a 1,000 Gallon Water Tank, Detroit 653 Engine with Less than 1,000 Hours, Rebuilt Clark Powershift, Undercarriage is basically new, Transmission Rebuilt, Clark Winch, New Bushings in Tracks, Ready for the Woods. Gross Vehicle Weight: 27,250lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 KMC1000 -Tree tow grapple -Clark winch -353 Detroit with blower and turbo -3 speed Clark transmission -New injectors -Hours are unknown -New paint

KEN MILLS ENGINEERING 12 BAG Dust Collector w/ Airlock and AugerSpecifications: -- 20 HP CORAL blower with 7,000 CFM -- 12" Inlet. -- (12) Filter bags. -- Air Lock w/ 1 HP auger for waste removal.

KMS 3 Saw Edger 30" x 4" Capacity Laser Lights

KNIGHT CL2444-3000 Scissor LiftSpecifications: -- Pneumatically operated 3,000 Lbs. capacity. -- 24" x 44" Top platform. -- Lowered height 7-1/4", raised height 24-1/4" for total travel of 17". -- Full safety skirt with pneumatic control pedestal.

KNIGHT l76119 Scissor LiftSpecifications: -- Pneumatically operated 4,000 Lbs. capacity. -- 75-3/4" x 118-1/3" Top platform. -- Lowered height 8-1/2", raised height 26" for total travel of 17-1/2". -- Full safety skirt with pneumatic control pedestal.

Kobalt 1 Phase 5HP Air Compressor

Kobelco Crawler Crane CKE2500 -18200 hours -2 Winches -250 ton crawler -200’ of boom -Mitsubishi engine -Rooster sheave -Heat and air -Removal counterweight system -LMI -Anti tube block -Block and ball

Bucket Counterweight Engine Enclosures Lift - Standard Lighting Mirrors ROPS - Enclosed Steering Type - Wheel Ultra Low Sulfur Diesel Fuel

MLS Number 10846369 2018 Kobelco SK260LC-10 Excavator 185 HP 4-Cylinder Engine Variable Hydraulic Pumps 1170 Hours 85% Undercarriage with 36” Triple Grousers 60,000 lbs. Machine Factory Warranty through 8-29-21

Kobelco SK200 LC Runs and operates

2018 Kobelco SK140SRLC excavator track hoe, joysticks controls,enclosed cab, heat and air cab, 24 inch pads, nice tight and dry machine. 8,417 hrs. $52,000.... Call eddie at 931-seven 04-7852

KOBELCO SK350-9 Crawler ExcavatorSpecifications: -- Engine: 270 HP (Diesel) -- Number of cylinders: 6 -- Esco Bucket: 54"; Equipped with: -- A/C -- LCD display -- Auxiliary Hydraulics -- Good Undercarriage -- Hours: 9,701

Kobelco 115SR Excavator, 5700 Hours, Blade, Mechanical Thumb, Bucket

008 Kobelco SR140. Blade and thumb. Runs and operates great. 7100 hours. Recently serviced ready to go to work

KOCH BD-A BORING MACH. (FEED THRU CNC): -- Specifications: Model BD-A Boring Machine for straight rail-stock work pieces for Horizontal & Vertical Drilling; Infeed and outfeed pass height is 36.2" (920 mm) . The work pieces are transported through the working stations by means of a cam transport system.Stock is worked in clamped position. -- Stock dimensions: Stock length 9.8" - 59" (250 - 1500 mm), Stock width 1.50" - 9.8" (38 - 250 mm), Stock thickness 0.63" - 1.18" (16 - 30 mm) Note: The specified dimensions do not allow all possible combinations. -- Horizontal drilling station:Each side with (1) drilling unit with 2.7 HP (2 kW) - 3,400 RPM, Each horizontal boring heads with (3) Spindle Type D-1277 boring chucks on 16 mm centers;10 mm dia shank & 70 mm max bit lengthEach head moving on linear guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holesLinear path control for stock transport with low profile machine bed and linear guides, fixed stock stops,Adjustable working stations with motorized width adjustment. -- Vertical Drilling head with rotating device:(2) LH & (2) RH Type D -1277, 2.7 HP (2 kW) Adjustable vertical boring heads with dust extraction hoods & variable speed from 3,000 - 6,000 RPM; Each Drilling chuck with (1) Drilling Spindle per chuck. Drilling Chucks with KOCH "QC" (quick change) system & rotating device each head; 10 mm dia drill bit shank & 70 mm max bit lengthEach head moving on linear guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holesLinear path control for stock transport with low profile machine bed and linear guides, fixed stock stops,Mechanical digital read out for manual finite adjustment, (2) air hold down clamps, foot pedal control to start activation. -- Features:The stationary machine side is on the LH side (seen in transport direction) and not adjustable. The RH is adjustable via NC controlled "X" axis.The machine is equipped with Hopper Feed & has a part stack capacity of approx 9.8" (250 mm) & working capacity of approx 48 Pieces/Min.Stock infeed belts move the workpiece through an intermediate hopper to the stock support. Then the workpiece is transported through the working stations by means of transfer belts with lateral stock alignment; working pass height (36.2" (920 mm).Stock is worked in clamped position; There are stock outfeed belts at the machine outfeed. The workpiece is transferred to the out-feed hopper & removed manually. -- Operator & Machine Control:Beckoff SPS PLC for running the machine. -- Complete With: Open Station to add Dowel Inserting units at a later time ( Dowel units are not included) Manual Hand Pump Central Lubrication system for working units (1) NC controlled positioning of machine RH side (X), LH side is a fixed "0' point. Hopper Rail Feeding devices with capacity of approx 48 Work Pieces/Min. Separate drive for outfeed belt. Center Stock support. -- O

KOCH SPRINT SELECT.LINE 3000 CNC RAIL BORE & ROUTING MACHINE: -- Specifications:NC-positioning for "X", "Y" axis, "Z" axis is manual adjustment. Horizontal drilling station, with 3 individually controlled drilling spindles with automatic step-by-step, boring into rail components, drawer parts, chair pieces, etc. at programmed random spacing. Horizontal Routing Unit for mortise, tenon, louver, strike plate, etc. type processing. -- Working Cap: Stock length (Y) from 4.25" - 31.5" (110 mm - 800 mm), stock width (X) from 0.75" - 120" (20 mm - 3,050 mm), stock thickness (Z) from 0.5" - 2.4" (4 mm - 60 mm), max. boring depth 1.1" (28 mm).120" (3,050 mm) "X" axis divided into (4) work zones of approx 29" (736mm) ea., one part can be processed, while the others are being unloaded or loaded. -- Equipped with: (10) Stock clamping cylinders; Stock clamping system for panels/rails, small parts & solid wood parts.(3) Independent Horizontal boring spindle, 7,200 RPM, 1.25 HP (.9 kW) motor. (1) Horizontal Routing Unit for Rails, mortise, tenon, louver type processing & Door strike plates, plungers, hinges, etc., 9,000 RPM, 3HP (2.2 kW) motor. -- Operator Interface:NC Front end with 15" color touch screen monitor pad & stored in built-in CNC control using Windows type operating system with graphics and online diagnostic. serial interface and USB connection. Touch screen pad at eye-level height, integrated into machine frame structure, menu driven operator interface for function control and graphic illustration of machine functions. -- Features: Positioning speed of working units at 197 FPM (60 MPM). -- Complete with:Central lubrication system; (2) Fixed fences (1-RH & 1-LH side), (2) pop up Center Fences & (4) working zones. -- Options Include:Some additional spare parts ordered with the machine & as pictured.