Equipment For Sale

39 inch sander for cabinet doors. Electronic motors adjustment for each head, up and down. Speed and rotation for each head Cross sanding- oscillating Cylinder drum flap- oscillating Disc station- oscillation. Double sided abrasives included Three 8’ dust ports. 480 V 3, phase, 60 hz.

2001 Foster 6 Ton Trailer Pintle hook Tandem Ramps Good decking 18' long 12k lb capacity Good shape

4INDUSTRIES 12-200 Roll Feed multiple Rip SawRoll feed multiple rip sawSpecifications: -- 12" maximum width -- 1/2" to 2" thickness -- Minimum length 16" -- Feed speed up to 200 FPM with driven bottom feed rollers, non driven top roller -- Main saw motor 40 HP -- Feed motor 7.5 HP -- Saw blade 12" diameter

FRAMA - TC-1500, ...Hydraulic Copy Lathe With One V-Gouge Copy Head and Two Manual Top Turret Heads & Knife SharpenerHydraulic Copy Lathe with (3) different speeds during execution of the work. Possibility of manual or automatic configuration on (3) intensities: 1) Regular working speed, 2) slow working speed for difficult points reproduction, and 3) fast speed to eliminate nonproductive points. Technical Data. -- Main drive motor: 6 HP. -- Hydraulic pumping unit: 2 HP motor. -- Max. turning dia.: 300 mm (12"). -- Distance between center: 1,500 mm (59"). -- Max. cross-slide speed: 9.5 MPM (30 FPM). -- Carriage return speed: 11 MPM (36 FPM). -- Copying device stroke 75 mm (3"). -- Max. hydraulic pressure between cones: 20 KG/CBM. -- Headstock taper: MT 4. -- (8) Turning speeds: 1,000 - 1,250 - 1,750 - 2,000 - 2,250 - 2,500 - 3,500 - 4,500 RPM. Also included : -- FRAMA ATC 2005 Knife Grinder: 2 HP motor. -- (1)Steady rest 70 mm (1) 18 mm and (1) adjustable for square -- Tailstock and tool holder

MLS Number 9982981 1995 Franklin 170 Grapple Skidder Single Arch Esco Grapple Winch Runs good. Hour meter broken 28L Tires at 95% Open ROPS cab Cummins 6 cyl, - Reman in last 1500 hours

5.9 Cummins Engine W/22" Hotsaw Head

Franklin 170 Grapple Skidder, $18,000

John Deere Motor (Power Tech)

Franklin 170, Cummins 6BT Engine, Rebuilt Transmission w/ ZERO hrs., $16,000

1998 Franklin 170 -Unknown hours -6068 John Deere engine -Winch -28l tires(front-30%)(rear-75%) -Few small leaks -Chains

Franklin 170, 453 Detroit, Gear Drive Trans., 24.5-32 Tires at 85%, $9,500

Franklin 170 Cable Skidder Detroit 453 Looks rough but it runs and operates

On job working

Franklin Tree Farmer Skidder Detroit engine tight and dry new tires new clutch good condition. $22,500 765-428-0940

1999 Franklin 170 Cable Skidder 6.9 John Deere Power Tech 180 HP 7800 hours Tranny good Engine good. No blow by Center section tight New steering cylinder bushings New brakes Serviced regularly 24.5-32 tires at 50% New chains on front Runs and operates great

Tree Farmer C6 Cable Skidder Detroit 453 Non Turbo Engine Believed to be mid 70s Repacked Steering Cylinders New Battery New Fuel Filter

1991 FRANKLIN/TREE FARMER C7 CABLE SKIDDER MTER READS 4,302 HOURS 300 HOURS ON ENGINE REBUILD TURBO WAS REPLACED 6 MONTHS AGO 50HP INJECTORS IT HAS DOORS VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

Franklin 405, Cummins 4BT Engine, New Center Section Components, $14,500

FRAVOL VSR TOP & BOTTOM TRIMMERSpecifications: -- Edgebanding thickness 0.4 mm to 3 mm, 16 mm (0.62") to 60 mm (2.36") panel thickness capacity. The rough trimming function uses vertical copy pads and one disc copier between the two cutters in a horizontal position, allowing 0.4 mm to 3mm radius edge rough trimming without replacing the cutters. Panel working height (thickness) is from 16 mm to 60 mm.Equipped with & Features: -- Two 12,000 RPM motors complete with braze welded hard metal cutters Ø 50x16- Z6. Your choice of profiles R1; R2; R3; 5°; 30°. -- The machine comes with a new, patented worktable that provides smooth panel sliding and extremely flexible edging without using jigs. -- Sliding on nylon blocks allows perfect cleaning of the panel melamine surfaces.

FRAVOL SMART S600-23 Edgebander w/Pre-Mill & Corner Rounding:Main Specifications: -- Edge & Workpiece Capacity: 0.4 - 8 mm (0.016 - 0.315") edge; 10 - 60 mm (0.394 - 2.362") panel thickness; -- 140 mm (5.512") min. panel length and 100 mm (3.937") min. panel width. -- Feed-speed, 14 or 18 MPM (46 or 59 FPM.)Front-End Equipped With: -- Pre-Milling Station (RT/S), (2) motors @ 1.1 KW (1.5 HP), 12.000 RPM, LH & RH rotation w/pneumatic programmable jump control for chip-free and clean panel edges. Standard equipped with Dia. 60 mm x 64 mm H, with diamond inserts. -- IR Panel Heat Lamp: Improves gluing bond especially during cooler ambient temperatures and humid conditions. -- Automatic Edge magazine: For strips up to 8 mm & coil stock up to 3 mm thick PVC. -- Duo Gluing System: For regular granulate Hot Melt (EVA) and easy conversion to PUR glue. "Teflon lined" glue tank with bi-directional glue roller. Automatic temperature reduction during stand-by time. Glue tank has quick release system for maintenance or quick change to a different color or glue type. -- Side Pressure Section: (3) Pressure rollers, (1) motorized, (2) idle, pneumatic pressure control and programmable NC-positioning servo motor.Work-stations: -- End Trimming (INT 2/S): (2) motor @ 0.50 KW (0.70 HP) 12,000 RPM, automatic pneumatic chamfer 0° - 15° or total exclusion from control panel. Glides 45° on prismatic linear hardened steel guides. -- Trimming Unit (RF-S/S): Top/Bottom flush/bevel/radius milling unit, (2) motors, 0.73 KW (1.00 HP) 12,000 RPM. Pneumatic remote tilt in (2) positions, postion-1 for radius and thin edges up to 0.8 mm trimming, position-2 for flush trimming up to 8 mm edges.Equipped with banding thickness gauge block feature for quick and easy set-up/changeover. Includes 1-axis NC servo control motors for programmable change-over from thin to 8 mm solid wood edges or incremental re-positioning of the cutter head. -- Corner Rounding Unit (SYNCRO 1): Compact and easy to set up for leading & trailing edges, (1) motor 0.22 KW (0.295 HP) 12.000 RPM, electronically synchronized. Working capacity, min. 10 mm, max. 60 mm panel thickness. -- Profile Scraping Unit (RB/S): Top & bottom radius scraping for PVC - ABS edges. Heavy construction to eliminate vibrations and guarantee superior edge quality. Air blow-off jets and chip collection box. -- Clean Spray System: Top/Bottom spray nozzles applies edge cleaning solvent prior to buffing. -- Glue Scraping Unit (RC/S): Top & bottom pneumatically operated glue scraping on flat panel surface to remove potential glue squeeze-out that otherwise would coat the cloth buffing discs. -- Buffing Station (GSI/S): Top/bottom (2) motors, 0.09 KW (0.125 HP) 2,800 RPM, manual, horizontal, vertical and tilting adjustment -- Hot Air Unit PHON (GP/S): Top/bottom hot air blowers to restore PVC color after scraping. Electrical power 2,000 Watt, 0° to 600° C temperature adjustment.Complete With:• PLC Program Control, with 10.7" col