Equipment For Sale

Taylor Forklift, runs & works good

TAYLOR 40 Section Clamp Carrier.Specifications: -- 40-Section, 8-1/2' width capacity -- Average 4/5 clamps per section (175 clamps total), all with 32" max. clamp opening. -- Equipped with (175) clamps plus a pallet of spares that require repair, 32" clamps with 2-1/2" high jaws .Complete with: -- Heavy Duty Drive for rotation,& clamp tightening. -- Foot pedal control. -- Includes a glue applicator.

Taylor Forklift tight machine

MLS Number 13019231 2018 Taylor X330S Forklift 8991 hours 33,000 pounds capacity 48,600 chassis weight 114" forks 132" lowered height 236" max height Tires 100% SS/FP

TAYLOR - 800036: 7' W, 12-Section Semiautomatic Pneumatic Clamp Carrier with Flattener & TightenerEquipped with: -- (71) 32"; Cap. Clamps with: 4-5/8"; W x 3-1/2"; H Jaws. -- Air motor drive. -- Dual foot pedal control.Complete with: -- Pneumatic Panel Flattener. -- Pneumatic Clamp Tightener.

--In Auction: https://exfactoryauctions.com/Detail/CR-230068/event/A122024$1 --No Reserve!-- TAYLOR 800036 7' W 12-Section Semi-Automatic Pneumatic Clamp Carrier, with Flattener & Tightener Equipped with: (71) 32” Cap. Clamps, with 4-5/8” W x 3-1/2” H Jaws. Air motor drive. Dual foot pedal control. Complete with: Pneumatic Panel Flattener. Pneumatic Clamp Tightener.

TAYLOR - 6-Section: Pneumatic Clamp Carrier6-Section x 10-1/2' width cap.; (36) total clamps; 30" opening on clamps; 3-1/2" high jaws; includes: Pneumatic rotation; tightening; panel flattening. -- Overall assembled dimensions: 9-1/2' Deep x 13-1/2' wide x 9' tall.NOTE: Teardown not included.

TAYLOR - 16-Section: Hydraulic Automatic Clamp Carrier8-1/2 Feet capacity; (16) sections. -- (6) Clamps per section, but sold with (96) clamps total; 32" max. opening; 2-1/2" high jaws. -- Heavy dual Hydraulic Drive for automatic rotation. -- Automatic pneumatic panel flattening & hydraulic clamp tightening. -- Operator applies: Glue to the stock; loads parts for clamping & then unloads. - The rest is automatic.Tightening assembly with: Panel flatteners automatically advances to each clamp; flattens the panel & tightens the clamp; moves on to the next clamp. -- Operator. controls: Start & Finish. NOTE: Machine originally with (28) sections; reduced to (16) section. There are approx. (70) additional Clamps available.Machine already torn down; ready to ship!

MLS Number 13417095 2016 Taylor TN520S Forklift 12794 hours 52,000 pounds capacity 75,330 chassis weight 60" forks 164" lowered height 106" max fork height Pneumatic tires 90% Diesel

Capacities: 11” minimum length 98” maximum length 1” minimum width 32” maximum width 5/8” minimum thickness 3” maximum thickness with a conversed glue spreader(model 30J)

MLS Number 13686587 2021 Taylor X330S Forklift 6680 hours 20,600 pounds capacity 49,050 chassis weight 96" forks Sideshifter Tires 75%

2016 Taylor TN520S Pneumatic Tire Forklift with 12,794 hours on a diesel engine. Overhead Guard, and enclosed cab. Fork Length 60" Lowered Ht. 164", Max Ht. 106". Tires have 90% tread remaining. Small leak @ oil pan gasket and Hydraulic pump seal. Weight 74,400 lb Length 22 ft. Width 10.9 ft. Height 12.2 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

TB Woods 150HP Soft Start

10 HP 575 volt unit. Has between 25-27 CFM. RPM: 1745

1760 RPM, TEFC

Tregarne Wood Welder New in Box

2014 Terex Phoenix 3300 trommel -8900 hours -Rebuilt engine and new main pump -Belts are in good shape -Has self-cleaning tail pulleys -New fluids Everything works as it should !!!

DEUTZ TD 2.9 L04 (60HP) LARGE CAPACITY BIOMASS HOPPER 78'9" DRUM CENTRES GIVING A MAX STOCKPILE HEIGHT OF 34'6" AT 25 DEGREES 42" WIDE 3 PLY BELT HYDRAULIC FEED HEIGHT ADJUSTMENT HYDRAULIC FOLD FOR TRANSPORT CRAWLER TRACKS WITH PENDANT CONTROL SYSTEM 2 SPEED TRACKING LOW LEVEL GREASING

TEREX ATLAS 1604 K ZW Wheeled Excavator w/ Grapple and MagnetSpecifications: -- 120 HP Diesel Engine -- 7.5 kW generator.Equipped with: -- Grapple -- Magnet -- Just replaced the solenoids fuel injectors and the exhaust valve. Hours: approx. 3,500