Equipment For Sale

2006 Vermeer TG7000 2100 hours Work ready

2017 Vermeer TG7000 Tub Grinder w/Cab and Loader. Work ready machine. Cat C27 950 HP, air compressor, magnetic head pulley, Remote control, auto reversing fan, Series duplex drum. 7175 Hours $460,000 OBO 616-875-2241

2006 Vermeer TG9000 13’ Tub Grinder, Cat 3412E 860hp with 8900 hours, Heads and rebuilt done at 6500 hours. Width 46 ft Width 11.9 ft Height 165 in Weight 106,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Vermeer Tr626 Trommel Screen -2600 hours -Tipping grid -3/8 stainless steel screen mesh Turnkey unit!!!

2012 Vermeer TR626 Wildcat Trommel Screen with 12,500 hours. Weight: 47,500 lbs Width: 102 in (8 ft 6 in) Height: 13 ft 4 in Length: 49 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Vermeer TR-5300 Trommel Screen, 2,200 Hours on Engine, New Sprockets and New Drive Chains, In excellent condition. Ready for Work. Weight 32,000 lbs Width (transport): 8.2 ft Length (transport): 39 ft Height (transport): 13.4 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Versatech 78" Brush Grapple for Skid Steer - NEW

4 Station Bagger

VERVILLE 6-SCREW HOLDING BINSpecifications: -- (6) Motorized 14-1/2" Diameter Bottom Screw -- (1) Motorized 14-1/2" Diameter Exit Screw -- 11 Feet Long -- 16 Feet Wide -- 18 Feet High -- 12 Feet High Support LegsDismantled and Loaded on Truck

Verville 4 Stage Bagging System. #C921 Located in WI.

VERVILLE 95-VP-438SE-CCW-35/125 - 4-Station Bagger complete Automatic Bag Placement and Bag SealerComplete line that was used for wood shavings only. The line is in operation at the time of this write-up.The Verville VP438-CCW is a four-station compression bagging system designed for high-efficiency bagging operations. It features high tubes of 125", automatic plastic bag sealing, and the ability to handle bag sizes ranging from 11" x 17" to 30" high. This system is often used in industries like biomass and packaging. It also includes features like an oil tank heater and a modem for remote monitoring.Bagging Capacity: -- It can handle bag sizes ranging from 11" x 17" to 30" high. -- Automatic Features: Includes an automatic plastic bag sealer for seamless operations. -- Height: The system features high tubes of 125 inches, making it suitable for large-scale bagging needs. Additional Features: -- Comes equipped with an oil tank heater and a modem for remote monitoring, ensuring smooth and efficient performance.Included with the system: -- The control box is mounted on the side of the auto-bagger with the Allen-Bradley Panel View 550 unit. --The main 4-section bagger is 125 " tall. --The main master control cabinet, -- The long 45° screw auger to feed from the bottom of the sifter to the top of the bagger, -- The Cousins HP2100 plastic wrapper with a turn table to wrap full skids. -- The master hydraulic tank & pump arrangement with all hoses. -- The full sealed bag auto discharge conveyor belt & turning roller conveyor. --The sifter with the canvas wrap cover. -- The screw conveyor that runs from under the outside dust collection system rotary airlock drops the “good"; wood chips down to the 45° screw with the “light dust going out thru the screw conveyor into an open dump trunk outside.Total HP 75Price Includes Loading on a Truck

VERVILLE VP300 3-Station Bagging SystemSpecifications: -- Main motor: 25 HP -- High of Tubes 116" -- Bag Size 11" x 17" x Up to 30" Finish HighNote: Bin and Infeed auger/conveyor is not included.

Verville VP300 Bagger

Verville VP300 Bagger 116" Tubes 10"x16" Bag size 460 V/3ph Includes: Infeed auger

VERVILLE VP424-S-CCW BAGGING SYSTEM4-Station Compression Bagging SystemSpecifications & Includes: -- High Tubes of 116" -- Bag Size 11" x17" up to 30" High -- Automatic Plastic Bag Sealer -- Oil Tank Heater and Modem -- Supplied with Transformer for your VoltageLoaded on your Truck

VESTIL EHLT-2464-2-55 Scissor Lift Full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities.Safety features: -- Electric toe guard to protect pinch points during lowering of the table. -- Internal safety velocity fuse to maintain platform height in event of hose or fitting failure. -- Maintenance prop, and upper travel limit switch to stop table at maximum height. Specifications: -- 2,000 Lbs. lifting capacity. -- 2 HP totally enclosed electric motor. -- Platform size 24" x 64". -- Lowered height 7", raised height 55". -- 24V AC push button hand control. -- Hydraulic component rating of 3,000 PSI.

VESTIL EHLT-4896-4-56 Scissor Lift Full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities.Safety features: -- Electric toe guard to protect pinch points during lowering of the table. -- Internal safety velocity fuse to maintain platform height in event of hose or fitting failure. -- Maintenance prop, and upper travel limit switch to stop table at maximum height. Specifications: -- 4,000 Lbs. lifting capacity. -- 2 HP totally enclosed electric motor. -- Platform size 48" x 96". -- Lowered height 8", raised height 56". -- 24V AC push button hand control. -- Hydraulic component rating of 3,000 PSI.

VIET - S211 R+ KRT, 2-Head Wide Belt Sander43" Width. cap.: Drum and Combination head.Head Configuration:1st Head: 160 mm 6.3″ Helical grooved rubber drum. 25 HP motor2nd Head: 160 mm (6.3") Helical grooved rubber drum with a platen combination head., 25 HP motorSpecifications: -- Each heads are powered by a 25 HP motor. -- The heads can be programmed to pneumatically raise & lower along with the platen and do (3) sanding combinations (with the twist of a button). -- Digital height readout and a calibration unit to the left side of the conveyor. -- Conveyor speed is controlled via a variable frequency drive 2.5 HP . -- Max width: 43″. -- Max. height: 6-1/4". -- Variable speed conveyor belt drive from: 3 - 16 MPM (11 - 52 FPM).Equipped with & Features: -- Both heads are equipped with: 1,130 x 1900 mm (44-1/2" x 75"). -- Roller & pressure shoe holddowns. -- Pneumatic tension of sanding belts and feed conveyor. -- Load meter on main motor. -- Disc brake on main motor. -- Emergency stops front & back. -- Roller table extensions front & back.NOTE: This is an extremely low-hour 2012 BIESSE Viet S1 dual head 43″ calibrating Wide Belt Sander.

VIET Planer Sander Sander model S2 321 HR/KRT ( 2018 ) !st head planer with helical insert cutter knives 30 HP 460 volts 2nd head drum contact roller 3rd head combination drum rollers with finish platen Both sanding heads run by 30 HP motor 460 volts Adjustable rubber coated pressure rollers Opening capacity range 1/8” to 6” Sanding belt size 44” x 103” Feed speed 19 to 52 FPM Electronic digital readout with auto thickness positioning Disc brakes on each machining station Front and rear emergency push buttons Electro pneumatic sanding belt tracking This machine has low hours as owner only ran half days first year and less after next years