Equipment For Sale

Morbark Vibrating Conveyor 20' x 22" w/DRV

2014 Morbark Flail 223 Debarker, has a Caterpillar 9.3 that's been deleted. It has 9,249 frame hours and 600 on the engine rebuild. New Hydraulic Clutch Last Year, New Rear Feed Wheels 23" Capacity Ready for the Woods. Length (transport) 33'5" Height (transport) 9'11" Width 9'10" Weight 46,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Morbark 58" 3K Chipper S/N 729

Morbark 58" 3K Chip-Pac S/N 868

Morbark 48" 3K Chipper S/N W367 w/600HP Motor

Morbark 58" 3K Chipper S/N W205

Morbark 640 debarker; steel control cab; 100 hp on head; 60 hp. On hydraulics Morbark 16ft log trough outfeed conveyor w/hydraulic drive Morbark 25ft log trough infeed conveyor w/hydraulic drive

Morbark 640 Debarker with cab Controls In/Out Feeds 4 Arm Kicker & Bark Removal chain. S/N 1033

MLS Number 1142424 2010 Morbark 5500 Flail Debarker 4260 run time hours and 2717 idle hours 600 HP John Deere Tier III engine Reversing fan 3 Flail-Drum Build date 5/12/10; Delivered new 12/12/12 Infeed opening 23" x 55" Discharge system = 72" wide by 24" long dual folding drag chain conveyor 285 gallon fuel tank; 360 gallon oil tank. Remote control Remote tether Standalone machine 66,500 lbs. Very well maintained Good working condition. Parts/owner and engine manuals

2008 MORBARK TYPHOON 20 CHIPPER -400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

Morbark 17' 4 Strand Transfer with SNL and Nose Skid (#10)

1996 Morbark Model 20 Whole Tree Chipper ,Caterpillar 425 HP Engine, Enclosed Cab with Heat and AC, Needs a Condenser for the AC, Machine has Separator ,Ready for the Woods... Overall Length 21’6” Overall Width 8’0” Overall Height 13’6” Weight 10,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Morbark Single Load 10hp Chip Blower

Morbark 44' Vibratory Conveyor. Located in WI. #C898

2006 Morbark 6600 HG Rebuilt CAT 1000 Hp engine Approx 2100 hours Magnet Great for processing pallets, brush, green waste & more

2018 Morbark 3400XT Wood Hog Horizontal Grinder CAT C18, 765 Hp engine Approx 2100 hours New belly belt/skirting; Rebuilt mill Engine has new cylinder sleeves with rod & main bearings, purge pump & hydraulic fan motor (replaced by manufacturer due to a defect) Remote Magnet 1” & 5” screens Great machine and ready to go to work

45' Morbark Live Roll Outfeed Rollcase with (21) 6-1/2" x 24" Rolls, Hydraulic drive and height adjustment

This mill has been shut down. The debarker is complete and ready to be removed. Morbark 636 Debarker Infeed/Outfeed Log Conveyors Waste conveyor runs under the system Approx 7' high structure Separate conveyors to load chips to trailer Includes All electric and hydraulic, steel walkways, 6x6 insulated cab

Mobark 1400 Tub Grinder, used for municipal waste only, in very good condition, turn key operation. $120,000

Morbark Chip Blower Hopper Feed Came out Running 10 HP Motor