Equipment For Sale

Cat 3412E 860hp Engine status report shows 43% average load factor, 3317 idle hours. 8899 hours on original engine. Completely serviced and runs properly. Morlift 500 loader with tight grapple, A/C cab all nicely fitted. Auxiliary air compressor Michigan model 40 knife grinder Extra knives Very sound, tidy chipper throughout. Call for complete condition report.

2014 Morbark Flail 223 Debarker, has a Caterpillar 9.3 that's been deleted. It has 9,249 frame hours and 600 on the engine rebuild. New Hydraulic Clutch Last Year, New Rear Feed Wheels 23" Capacity Ready for the Woods. Length (transport) 33'5" Height (transport) 9'11" Width 9'10" Weight 46,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Morbark shaker screen for a 58" dia chipper, good working condition

1992 Morbark 1200 Tub Grinder -10500 hours - 1200 cat 3412 twin turbo 650hp -Mill completely rebuilt and new bearings with 200 hours on it ($33k in repairs) -Replaced turbo pedestal and rebuilt turbos -Entire mill was replaced new with new bearings -Hours are a guess meter says under 1000 I believe so I’m guessing it rolled -Hydraulic cylinders were rebuilt on boom except for squeeze cylinder on grapple -The turn motor on grapple leaks a little -One of the stiff leg cylinders bleeds down for unhooking from truck Ready to grind

600HP, Advantage 3 drum, Wireless Remote, compressor, rebuilt turbo, serviced, nice machine for age

Morbark Grinder with New Discharge Chain, Spare Hyd Pack and Parts. Grinder and Core are 3 years old. Frame Is A Little Older But Same Model.

1983 MORBARK RXL 27 TOTAL CHIP HARVESTOR 5,110 HOURS 600 CUMMINS UPDATED SPREAD BEARINGS RUNS GREAT WORK READY FINANCING AVAILABLE WITH NO MONEY DOWN GRANITEHE.COM

1995 MORBARK WOLVERINE 6300 8,480 HOURS CYCLINDER CUMMINS 18 INCH SHEER RECENT TIRES VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

Rebuilt Deere 600HP engine, 6 pocket 3/4" chip drum. Wireless Remote

2007 Morbark 950 Tub Grinder -3000 hours -CAT 3056EATTAC engine (172hp) -Ready to work -Videos available upon request

2021 Morbark 30/36 whole tree chipper -1884 hours -Cat Engine -Pintle hitch towed -Extra sets of knives and parts -Factory Engine warranty remaining PRICE REDUCED!!!!!!!

2014 Morbark 1200XL-WCL -7571 hours -CAT C27, 875 HP -Cab Loader Option -New Floor -Spare Rotor, Screens, Tips, and Parts Package -Turn Key Ready to Grind

-400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

Morbark 3-Knife Chipper System Equipped with a 100 HP electric motor powering the chipper and a 3 HP electric motor running the shaker. All components are in very good condition. Make and OFFER today.

2020 Morbark 3400 XT low hours, fire damage, in storage last few years. $128,000

CAT C27 Work Ready

2007 Morbark 6600, Cat C27 1050hp with 6805 hours, Radio remote, Magnetic head pulley, Air Compressor, This unit was Factory Rebuilt a couple years ago. Weight: 91,440 lb Length: 44'11" in transport Height: 13'6" in transport Width: 11'10"

The complete Morbark debarker setup offered includes essential components for efficient log processing. It features log troughs that are fully hydraulic, with dimensions of 54" x 25' and ladderback chain. The hydraulic drive, along with a feed roll head, ensures smooth operation. The outfeed log trough is also fully hydraulic, complemented by a 26' hydraulic barn sweep equipped with 12" paddles for effective material handling. A Choremaster hydraulic barn sweep and a substantial 36" x 32" x 33" hydraulic tank with a pump are included for robust support. An 80" x 10' x 82" cab, accessible via steps, offers protection and visibility for operators. Critical to its operation is the 60 series Detroit diesel engine with 16,758 hours logged, providing reliable power. A 275-gallon fuel tank is included, although it may have a small leak that should be addressed. This used debarking setup is suitable for forestry and sawmill operations requiring dependable machinery to handle large-scale debarking tasks efficiently. For any inquiries or further details, interested buyers may use the alternate contact number provided, 607-438-7948.

2017 Morbark 1300 Tub Grinder, Cat C27 1050hp with 7,400 hours, Air Compressor, Loader, Magnetic head pulley. Weight 88,000 lbs Height 13' 6" Width 11' 11" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Morbark 40/36 Drum Chipper 7400 hours. John Deere 600 HP engine , It has been through shop completely. Width: 8'6" Length: 37'5" Height: 12'4.25" Gross weight: 52,500 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.