Equipment For Sale

1994 Timbco 425B Processor, Machine has Log Max 5000 Head, 15,000 Hours, Undercarriage is 50%, 404 Chain Pitch, Enclosed Cab with Heat Weight 55,235 lbs Length 21 ft 4 in Width 9 ft 8 in Height 12 ft 2 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Timbco 415 Processor, Logmax 7000 Processor Head, Machine Isuzu Engine and has 6000 Hours3.5 Gallons/per hour, Undercarriage is 50%, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 96,672.8 lbs Height - Top of Cab 10.7 ft Shipping Length - non tilt 13.5 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1993 Timbco 425 with Rolly-II Processor Head, 37" Bar Saw, New Air Bag in Head, Cummins 8.3 Diesel , Hours reading 6,769, Leveling Cab, Enclosed Cab with Heat and AC, Propac Heater, New Computer Sensor for Measurements ,No Oil Leaks or Engine Blow By , Final Drives Done Recently. Ready for the Woods... Weight 55,235 lbs Length 21 ft 4 in Width 9 ft 8 in Height 12 ft 2 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Good used tracks for Timbco 445 or 735 TimberPro

Used Timbco/Valmet/Komatsu and Timberpro leveling cylinders available

Used Timbco/Valmet and Timberpro main/stick boom cylinders available

Timbco 425D, Reman 8.3 Cummins, Replaced Track Frames and Undercarriage, Finals look great, Installing 360 Rotation Bar Saw

1996 Timbco T-415C, 22,525 hrs., $69,900

1997 Timbco T-415C, 8254 hrs., $42,900

Timbco 445D. The last of the mechanical machines. 8.3 Cummins, Rexroth pumps, Rexroth valve, in the woods operating today. Equipped with lateral tilt bar saw.

Dangle head link to fit Timbco 415 425 or 445 fellerbuncher boom. Exceptionally well made. One piece solid steel. Would also work excellent for a grapple.

NEW Tracks for 425 Timbco & 725 Timberpro, 28" single grousers, will fit other Machines also

Lohmann GFT 80 final drives available in many variations to fit Timbco 445, Valmet 445, Timberpro 735/745, Cat 521/522 and John Deere 853/859, 909 and more

Used and resealed rexroth valve banks available to for pre 2003 Timbco feller bunchers. individual valve sections are also available

28” single grouser pads for 445 Timbco or 735 Timber Pro. $40 each

1993 Timbco 425D -4xxx on meter -Engine been rebuilt -Just replaced both track rails and sprockets have less that 10 hours on them -Idlers and rollers are in good shape -Everything works -Ac/heat -Radio -33” Timbco bar saw head -40 degree tilt -Cameras on the head and behind cab -All bushings are tight Ready to work very well maintained

Low hour Tracks for 425 Timbco or 725 Timberpro, 28” Pads

2004 Timbco 425EX -19000 frame hours -22c Quadco 40 degree tilt head -8.3 cummins -D6 undercarriage -Heat/ac -New Bluetooth radio -Clean-fix reversing fan -Brand new track chains, drive sprockets, track hardware, track tensioner w/spring -Could use some tlc

Timbco 425 Tracks Also a Set for a Komatsu 445FXL-2 Available

2003 Timbco 425D with Logmax 7000 Processor Head, Enclosed Cab with Heat, Air is starting to go, Cummins 8.3 Engine, Unknown Hours, Undercarriage is around 75% Ready to Work. Length: 21 ft 4 in Width: 9 ft 8 in Height: 12 ft 2 in Weight: 55,235 lbs.