Equipment For Sale

2013 Tigercat 720E Feller Buncher 5600 Head with new teeth & disk. 30.5 X 32 tires 11,100 hours.

2012 Tigercat 822C Track Harvester with 12,654 hours, Log Max XT7000 processor head. Operating Weight 69,070.9lb Overall Width 11.16ft in Height To Top Of Cab 12.24ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 TigerCat 845C -14000+hours -Uc 50% -5702 360 head -Disk in good shape -Woods ready

CSI PTD264 delimber & Pitts carrier included. CSI DL-4400 saws shown are not included.

2013 Tigercat 620D Grapple Skidder, Winch, Has Cummins Engine, 1,250 Hours, Tires are 35.5, Dual Rings on on Rims, Enclosed Cab with Heat Air Radio, Every Pin and Bushing Replaced on the machine, New Parking Brake, Glass is Good, Exhaust Good, All Arch Pins Lined and Re-bored, Ready for the Woods. DIMENSIONS with standard tires and arch LENGTH 23'9" WIDTH 11' HEIGHT 10'4" WEIGHT 36,250 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Tigercat 822C Processor with 24,000 hours. Includes a Logmax 7000 Processor Head, Machine Runs Stong, Undercarriage 60%, Version 5 Computer, Engine was rebuilt at one time, Heat and Air Conditioning in Cab Ready for the Woods. Operating Weight W/O Attachment 54,000 lb Overall Length 14.59ft in Overall Width 10.93ft in Height To Top Of Cab 10.93ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 TigerCat H855D -8800+ hours -Waratah 624c head -Tight and dry -Uc in great shape Ready to work

2005 Tigercat 822 Feller Buncher, Equipped with a Koehring 24" Hot Saw with 90 Degrees, Enclosed Cab with Heat and Air Conditioning, Engine is a Cummins 8.3 Diesel with 6,900 Hours, Undercarriage is 90%, Ready for the Woods. Length 13 ft 11 in Width 10 ft 0 in Height 11 ft 0 in Weight 52,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Tigercat 720G Feller Buncher with 6900 hours, Tight and Dry Machine, Disk 75%, Tires 75%, New packings in cylinders, One owner. Weight 34,250 lbs Length 24 ft 0 in Width 8 ft 4 in Height 11 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Tigercat X822E -2,755 hours -Tigercat 5702 sawhead -HID lights -Webastos engine and hydraulics heater -FH400 undercarriage with 24" pads -Remainder of 3 years or 6,000hrs powertrain and hydraulics warranty which ends Aug,8th 2025 -$4,000 worth of spare hoses -Spare saw teeth and bolts -Oil filters -Machine is in like new condition

TC 5702 Sawhead, 110-degree wrist. 36” tri trac New teeth, serviced and dried up.

2012 Tigercat 610C -17864 frame hours -Previous owner did engine -40,000lb winch -Very tight machine -Tires 85% percent -Has a new front axle replaced in Feb 2024

1999 Tigercat 630B -14000 frame hours -4200 on 8.3l Cummins -New fuel filter -Greased -Two boom cylinders will be needed re-repacked -Top center pin is a little bit loose but almost don’t notice yet Functional woods ready skidder

TC ST5702 FELLING SAW S/N 57T0349, TELEMATICS, 340 DEG HI TQ HI ROT WRIST AND BOOM

2012 Tigercat L870C Feller Buncher -3500 hours on the following: -New engine -Pumps -Finals -Uc is around 70% -New A/C compressor and belts Ready to work

2004 Tigercat 822 Feller Buncher, Equipped with a 22' Hot Saw Cummins 6.7 Engine, 14,000 Hours, Enclosed Cab with Heat, Undercarriage is 90%, 36" Track Pads, Ready for the Woods. Length 13 ft 11 in Width 10 ft 0 in Height 11 ft 0 in Weight 52,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

35.5 tires, winch, dual arch

2014 Tigercat 620E, Woods Ready

2005 Tigercat 244 Log Loader, 2006 Big John Trailer with CTR Delimber and Topping Saw, CTR Ground Saw, Cummins 5.9 Diesel Engine Enclosed Cab Heat and AC, Ready for the Woods. Length: 15 ft 7 in Width: 10 ft 0 in Height: 11 ft 0 in Weight: 36,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Bandit 4680T Track Horizontal Grinder, Equipped with a Caterpillar C-27 1050 HP Engine,3700 Hours Currently, Undercarriage is 85%, Machine has 2" and 3" Screens, 2nd Owner, Wireless Control, New HG600 Clutch, New Head and Tail Shaft, New Conveyor Belt, Compressor on machine, Ready for Work. Weight 95,200 lbs Width 140 in Height 152 in Length 492 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.