Equipment For Sale

2008 Baker MDL BBR-O 2 HD Band Resaw S/N 08-4001

1995 Baker MDL BBR-O 3HD Band Resaw

Baker Dual Head Re-saw (horizontal) 1 1/4" band, 16" cant capacity. 2 Baker turn arounds with cant turners and 4 Baker brush de-dusters. All machinery has been stored in a building since we stopped sawing in 2008. Please call with any questions.

USED 3665D BBS-O/15-809 HAS 3366 HRS ON MILL 2-161900 RECROWN & BALANCE WHEELS, 2-101275 4 HOLE BEARINGS, 1-667462 ARBOR SHAFT, 1-101015 ARBOR BEARING, 1-205360 OIL FILTER, 1-205359 FUEL FILTER 1-205357 INNER AIR FILTER, 1-205358 OUTER AIR FILTER, 6-101466 1” BEARINGS, 1-17’4” X 1-1/2” X .050 X 1.1, ROTELLA OIL 15W40, 111297 TIMING BELT, 2-111298 TIMING BELTS, 80 121232 50H CHAIN, 4-121232 50H C/L , 2-101056 CAM FOLLOWER, 2-666512 ROLLER BRKT, 4-667895 BRASS SCRAPER, 4-675861 BRASS SCRAPER BRKT, 1-151257 JOY STICK, 2-168840 FENCE ARMS, 40 HRS LABOR DISASSEMBLE CLEAN AND REASSEMBLE FENCES,TOES,CLAMP, IGUS TRACK MILL HAS SOME KIND OF AFTER MARKET THROTTLE CABLE ON IT THAT DOES NOT GO TO OPERATOR STATION, BUT WORKS CORRECTLY.

Stationary Baker Blue Streak Baker Coresets computer set works with 8 board sets and 8 core sets 74HP Kohler Diesel (Does not require DEF) Large 28'’ precision machined solid steel band wheels I-Beam frame with solid steel bunks Up to 40'’ diameter logs Moveable guide opens to 36'’ wide cut Large easy to see measurement dial Standard 1.5'’ or 2'’ blade option Cutting length 20'6'’ Board drag back return Fully hydraulic, log loader, clamp, fence arm, toe rollers, variable speed dual chain drive. head raise and lower, log turner forward and reverse up and down, movable guide, built in 10 gallon tank, & controls Blade enters clean side of log after first cut and rotation operator controls in one convenient location Four post heavy duty tube frame head 23 gallon frame mounted fuel tank Hydraulic Blade tension 5 gallon tank with dual valves for blade lube drip baker bullet guides

BAKER Model 3640E Blue Streak Electric Sawmill Like New BAKER Model 3640E Blue Streak Electric Sawmill S/N 07-570. 36” diameter log x 24ft. maximum length 40 HP main motor with 10 HP HPU wired for 460 volts, separate control panel on pedestal to turn the system on/off. Includes an Inline Debarker cutter that travels with the head while it travels down the log. Has the Trailer Package, and 10” wide x 12ft. Roller Conveyor Model BCS-O S/N 07-642 for the outfeed, with manual foot pedals kickers to send the boards to the right or the left, and includes lots of extra sawblades. Current new price over $100,000. This was built in 2007 but has had very little use and has been stored inside. See photos of on our web site. Inventory No.KF1.

Baker board deduster, up to 8" wide capacity, electric drive, price includes all new brushes, feed belt and gone through completely, very good condition

Baker single head resaw, 12" wide capacity, 25hp electric drive on head, includes 2 end-around tables to make complete run-around system, price includes going through shop and is ready for production

2 strand transfer deck, 28" wide x 14' long, #80 roller chain, no drive, good condition

480V | Model # BDD-O | Serial # 19-552

480V | Model # BBR-0 "A" | Serial # 09-4089

Model 3650E with Baker (3) Strand Infeed Deck Excellent condition Hydraulic over electric general factory networks. Hooked up to power and ready to be demonstrated.

Accepts material up to 12" x 12" and uses a 12"-wide conveyor Main Drive Motor: 30 HP TEFC Variable feed speed from 0-95 feet (0-29 m) per minute 28" Dynamically balanced solid metal band wheels 4" diameter dust outlet requires 500 CFM REDUCED LOW HOUR MILLWORK MACHINE

New Fuses | New Main Breaker | Hydraulic Drive | Comes with 50 Blades

1993 Baker 4 Head Resaw Approx. 50 blades Size: 13' 2" x 1" x .035" x 1/2" Tooth Carbon Resaw Blade Saw 1 needs a new spindle. Hydraulic drive. New Main Breaker New Fuses A couple of Starters have been replaced. Approximately 6,240 Hours Baker 4 Head Resaw Specifications Guide System: Baker Low-Profile Flat Guide System with steel guide plates for enhanced precision. Saw Dust Outlet: Dimensions: 6"x6" (15.24 cm x 15.24 cm) square. Outlet Adapter: 90° adapter chute to a 4” (10.2 cm) diameter outlet. Rotation: Can be rotated for discharge in four directions. Recommended Airflow: 600 CFM (17 m³/min). Motors: Main Motors: 20 HP, 3-phase motor on each head. Inline Hydraulic Pump Motor: Cutting Capacity: 6" x 12" (15.24 cm x 30.48 cm). Feed System (3-Sided Feed Works): Rough-top belting for traction. Powered side feed rollers for smooth material handling. Non-powered hold-over wheels. Feed Speed: Fully variable, adjustable from 20 to 120 feet per minute (6 to 36 meters per minute). Delivery is available at the buyer’s expense

1992 Baker 6 Head Resaw Six-Head "C" Saw 1 needs a spindle and wheel replacement. Approximately 8,320 Hours Serial Number 92-379 6 Motors (30) HP (37) Amps Mechanical Drive

2 - Baker Stacking Racks available

Baker 2-Head Resaw 20 HP Motors Return Conveyor

BBR-0 | Electric Drives | No Hydraulics | 30 HP Motors | 1992

2018 Baker Model C 4 Head Resaw Well maintained Work ready Only selling to go to a smaller unit SN 18-4895