Equipment For Sale

2 Saw Adj. Trimmer, Electric Setworks

High Tech Trimmer System

Chipping Edger I/F O/F

Chip/Saw Outfeed

Nice Cab

PRE-OWNED UNKNOWN 23" X 144' Horizontal Sliderbelt Power ConveyorSpecification: -- One section - Approx. 23" Wide x 144' Long. -- Approx. 18" Wide Smooth Top Belt. Includes: 230/460/3 PH Motor {Fixed Speed}. CLEANED AND INSPECTED BY CONVEYOR TECHNICIAN

12-Station Paint Colorant Dispenser with Unused CupsDimensions: 24" x 24" x 24" H.

(2) Forklift Fork Extensions -- Length 72";, Width 7" -- Accommodates 4", 5" and 6" opening, Weight: 72 Pounds.

Pallet racking 9'6 ft & 8’4 racks X 42” wide and 16’ tall 31 - 4 shelf racks or can expand to 62 shelf racks (2 shelves)

drop belt, approx 20" wide x 12' long, hyd drive, good working condition

Chip Conveyor Approx 400' Removed from closed mill with low hours. Some new conveyor included.

"Hochstetler" band resaw, 12" x12" x 12' long capacity, 2" x 30" band wheels, line-shaft ready, foot print 11'6" wide x 28'6" long, complete run-around system ready to work, very good condition

Slab drop belt, 24" wide x 12' long, electric drive, hyd cylinder for drop belt, includes hyd unit for cylinder, very good condition

100HP Single Shaft Shredder With Infeed and Discharge ConveyorsSpecifications: --100 HP --Includes Infeed Conveyor- 50" Wide x 37’6"; Long, Sides 20"; high --Includes Discharge Conveyor - 47" Wide x 16' Long

(2) Complete Lumber Grading System with Package Maker, 4 Arm Tilt Hoist, Descrambler, 60' Strand Green Chain & 5 Chain Package Outfeed Deck

• 1 CROSS SANDING -- BELT DIM 6,600MM X150MM • SANDING SPEEDS 12 and 24 M /sec. • DRIVE POWER 15KW. • 3 LONGITUDINAL SANDING BELTS UNITS • BELT DIM----- 3250MM X 1650MM • SANDING SPEED 10 and 20 M /sec • DRIVE POWER 15KW PRESSURE BEAM WITH COMPUTER CONTROLLED SELECTIVE PRESSURE REGULATION SYSTEM. WITH INFINITE PRESSURE MATCHING OF INDIVIDUAL PRESSURE ELEMENTS FOR OPTIONAL MULTI TRACK FEEDING. 16MM CONTROL ROLLER SPACING , WORK PIECE TOLERANCE COMPENSATION UP TO A MIN. OF 2MM. THE CORRECT POINT IN TIME FOR THE DEPLOYMENT OF THE PRESSURE BARS IS DETERMINED AUTOMATICALLY BY AN ELECTRONIC LINE CONTROL IN DEPENDENCE OF THE FEED SPEED. Air dryer BRUSH CLEANING "EA2" UNIT CENTRALLY ADJUSTABLE IN HEIGHT INCLUDING EXHAUST HOOD AND PRESS ON ROLL. • DIAMETER----------------------------------------------- 220MM • DRIVE POWER---------------------------------------- 2.2KW • BRISTLE TRIMMING -------------------------------- FIBRE • VOLTS---------------------------------------------------- 400V-- 50 C/S

• 1 CROSS SANDING -- BELT DIM 6,600MM X150MM • SANDING SPEEDS 12 and 24 M /sec. • DRIVE POWER 15KW. • 3 LONGITUDINAL SANDING BELTS UNITS • BELT DIM----- 3250MM X 1650MM • SANDING SPEED 10 and 20 M /sec • DRIVE POWER 15KW PRESSURE BEAM WITH COMPUTER CONTROLLED SELECTIVE PRESSURE REGULATION SYSTEM. WITH INFINITE PRESSURE MATCHING OF INDIVIDUAL PRESSURE ELEMENTS FOR OPTIONAL MULTI TRACK FEEDING. 16MM CONTROL ROLLER SPACING , WORK PIECE TOLERANCE COMPENSATION UP TO A MIN. OF 2MM. THE CORRECT POINT IN TIME FOR THE DEPLOYMENT OF THE PRESSURE BARS IS DETERMINED AUTOMATICALLY BY AN ELECTRONIC LINE CONTROL IN DEPENDENCE OF THE FEED SPEED. Air dryer BRUSH CLEANING "EA2" UNIT CENTRALLY ADJUSTABLE IN HEIGHT INCLUDING EXHAUST HOOD AND PRESS ON ROLL. • DIAMETER----------------------------------------------- 220MM • DRIVE POWER---------------------------------------- 2.2KW • BRISTLE TRIMMING -------------------------------- FIBRE • VOLTS---------------------------------------------------- 400V-- 50 C/S

Saw Bench w/2 Anvils

Guide Dresser

Helle cable drum unit for carriage drive, drum is 13 1/2" dia x 16" wide, hyd drive, good working condition