Equipment For Sale

MORBIDELLI AUTHOR 504 R CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Working Cap. "X" Axis 139-3/8" (3,540 mm); "Y" axis 48-3/8" (1,230 mm) for routing & 39.6" (1,008 mm) for boring; "Z" axis 3.1" (80 mm). -- Positioning Speed:"X" Axis 213 FPM; "Y" axis 131 FPM; "Z" axis is 65 FPM. -- Worktable:(8) Adjustable panel supports each with: (3) Vacuum pods; worktable setup for (2) independent working areas. -- Boring Unit:(29) Independent vertical boring spindles forming a T-configuration with: (15) Spindles on the "X" axis and (14) spindles on the "Y" axis.A total of (8) horizontal spindles with: (3 + 3) on "X" Axis; (1 + 1) on "Y" axis. -- Machining:(1) 9 HP (7 kW) Vertically mounted router; inverter driven (FUJI) at 12,000 - 18,000 RPM.(1) 8-Position ATC for Automatic Tool Changer. -- Operator & Machine Control:"NUM CN" Loaded onto a HP, PC Based Controller mounted in separate control cabinet.15" VGA Color monitor and ergonomic keypad. Remote Control Pendant: Allows the operator to move around and still control all the axis movements, speed, and emergency stop.Includes: USB Ports; (2) serial ports RS-232 & RS-242 (requires no 3rd party CAD system for downloading programs). XILOG-PLUS OPERATOR Interface: Offers incredible list of: Functions from (a) Auto. diagnostic to (z) zooming; controlled acceleration & deceleration, encoder feedback, dynamic tool correction via PLC due to active tool wear using space-and-time criteria; programs can be transferred via diskette or downloaded by wire. Equipped with: Onboard mini-CAD with built-in programming for writing circles, ellipses & angles with only a few keystrokes; on-board cycle optimization, on-board calculator, mirror imaging, and repeat imaging. -- Complete with:(1) 100 cbm/Hr Vacuum Pump. -- Actual model is: MORBIDELLI - Author 504 .

ux200 Axes Panel length (max.) mm 3200 Panel width (max.) mm 1300 Panel thickness (max.) mm 80 Panel weight (max.) kg 100 X-Y-Z axes speed (max.) m/min 120- 35- 30 Drilling head (std.) V Vertical spindles no.31+31 rpm up to 6000 48+48 Horizontal spindles no. 8(X)/4(Y) rpm up to 6000 16(X)/4(Y) Integrated blade in X axis Ø mm 125 rpm 7500 Electrospindle (opt.) Power (S6) kW (Hp) 9,5 (13) Max. speed rpm 24000 Available tools no. 6+6

MORBIDELLI - AUTHOR 330: Flat Table Machine (ATC & Boring) -- Specifications4' x 10' Stationary extruded aluminum "MATRIX" table for "Nested Base" manufacturing. -- Work Area:"X" Axis is 113.85" (2,892 mm); "Y" axis 50.78" (1,290 mm); "Z" axis stroke is 11" (280 mm); max material thickness 4.7" (120 mm). -- NOTE: When using the "Rake System," 4' x 8' is the max. panel size. -- Positioning Speed"X" Axis 262 FPM (80 MPM); "Y" axis 148 FPM (45 MPM); "Z" axis 74 FPM (22.5 MPM). -- Closed loop AC Servo drive system with: Recirculating ground ball screw in the "X", "Y" & "Z" axes; all axes ride on precision prism linear guideways. -- WorktableAluminum grid "MATRIX" vacuum table machined with a square grid pattern for fixturing parts; grid pattern allows use of vacuum pods or closed cell rope gasket material and use of spoil boards. -- (2) Independent working areas; external pop-up reference pins located on the sides & back of the table for positioning parts. -- Boring Unit2 HP (1.5 kW) - 4,000 RPM Motor; (12) independent vertical boring spindles: (7) Spindles in "X" axis & (5) spindles in "Y" axis. -- Machining (1) 10 HP (7.5 kW) "Power 2000" Electrospindle w/lifetime lubrication and HSK F63 adaptor; spindle speeds from 900 - 18,000 RPM. -- (1) 12-Position "Rapid-12" traveling ATC tool plate for "on the fly" ATC. -- Operator InterfacePC Front-End with: NUM 1040 + Xilog III + Windows Operating System. -- 12" High resolution CRT, ergonomic keypad; 1.44 MB & CD ROM disk drives; (2) serial ports: RS-232 & RS-242. -- All housed in air-conditioned cabinet with: KELVIN Air conditioner. -- Complete with:(2) 300 cbm/Hr Vacuum pumps; emergency stop rope; Safety "Bump-Stop" system; Handheld pendant control. -- Options IncludedNesting Rake & off feed table to increase machine/Operator output -- "SOUTHWORTH" Lift Table; roller conveyor section to bridge safety barrier. -- (1) 10 HP (7.5 kW), 460 V, 3 Cy DUSTEK 3-bag Dust Collector. -- Actual model: MORBIDELLI - AUTHOR 330 NBR

Morgan deduster, 6" wide capacity, electric drive, excellent condition

Morgan single head resaw, has return belt, electric drive, good working condition

2008 Morgan Single Head Resaw Can be purchased without Kohler diesel engine Could use replacement belt Runs and works good

Morgan 6' Pallet stacker

Morgan Double End Trim Saw

Morgan 2 Saw Edger

Morgan Mini Champ 4 Saw Edger

Morgan Scragg Mate Edger 20hp on Saw Arbors

Morgan 2 Head Resaw 12 x 12 Grade 480 Volt 3 Phase with 50HP Motors, On board HPU. 4" Bands.

Morgan In Line Deduster S/N 061495037

Morgan In Line Deduster

Morgan Notcher, can take 8ft boards, 10HP 240V single phase, fully tested and ready to go.

MORGAN "3-Head" Multi Blade trim saw: -- Equiped with:(3) 10 HP motors, 10'capacity 5'6" thick with Disconnects & Controls

Morgan Scragg. Located in ID. #C963

Morgan single head resaw with return belt, electric drive, very good condition and ready to work. Has 3 phase 460 volt plugs.

Morgan Scragg Mill SN: 041200116 Mill is in great operating shape with no issues All electriclal panels and hydraulic pump are included Blower and log deck also available Call for full details

Morgan 5hd Trimmer. Can cut up to 23' lumber. 7.5hp #00898