Equipment For Sale

2012 Morbark M18R Drum Chipper, 200 HP John Deere with 4,900 hours, Hydraulic front jack and discharge chute, 5000lb winch, Manual rear outriggers. Gross weight: 11,000 lbs Length:21 ft 2 in Width:7 ft 7 in for single or tandem axle, 8 ft 5 in for single axle dual wheel Height:9 ft 6 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1996 Morbark 1200 -CAT motor approximately 3500 hours -Motor was replaced at 7000 hours -Engine runs great -Rollers and the Chain that turns the Tub need some work -Have the rollers for it Budget Grinder !!!!

1998 Morbark Mountain Goat 30/36,Whole Tree Chipper, has a Caterpillar 575 HP, 325 Undercarriage Which is 80-85%, Enclosed Cab with Heat and AC, New Updated Drum with 1.000 Hours, Morlift 250. Loader, Rebuilt Pumps, New Hydraulic Pump, Hydraulic Oil Cooler and Fan, Ready for the Woods. Length 31' 6" Height 12' 5.5" Width 8' 5.25", weight 36,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

16' Log Trough with Kicker. #00890

2021 Morbark 223 Track Flail Debarker with 2,923 hours on a Cat C9 Engine. Length (transport) 33'5" Height (transport) 9'11" Width 9'10" Weight 46,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Morbark 23NCL Whole Tree Chipper, Cat C27 800hp with 6,500 hours, 3 knife 3/4 chip, Radio Remote, Tether Remote. Length: 31'6" Height: 11'6" Width: 8'4" Weight: 36,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Morbark Series 1000 Stac Trac

2019 Morbark MXG42 Wheeled Stump Grinder, 399 Hours.

2019 Morbark 50/48X -5,591 hours -Brand new wet clutch -New gearbox -New EGR Cooler -The drum has new knife holders, clamps, and bolts. -Comes with 5 sets of knives and 2 sets of counter knives Hours will rise as it is a working unit!!!!!!

The complete Morbark debarker setup offered includes essential components for efficient log processing. It features log troughs that are fully hydraulic, with dimensions of 54" x 25' and ladderback chain. The hydraulic drive, along with a feed roll head, ensures smooth operation. The outfeed log trough is also fully hydraulic, complemented by a 26' hydraulic barn sweep equipped with 12" paddles for effective material handling. A Choremaster hydraulic barn sweep and a substantial 36" x 32" x 33" hydraulic tank with a pump are included for robust support. An 80" x 10' x 82" cab, accessible via steps, offers protection and visibility for operators. Critical to its operation is the 60 series Detroit diesel engine with 16,758 hours logged, providing reliable power. A 275-gallon fuel tank is included, although it may have a small leak that should be addressed. This used debarking setup is suitable for forestry and sawmill operations requiring dependable machinery to handle large-scale debarking tasks efficiently. For any inquiries or further details, interested buyers may use the alternate contact number provided, 607-438-7948.

2015 Morbark Stac-Trac 1000 Track size: 30’, overall height: 9’ Drive: 15hp. good shape and maintained. Lots of spare parts included. SPECIFICATIONS 1000 Stac Trac Specifications Power 15-hp electric Track Speed 211 fpm Grapple Opening 1.375" – 18" Weight 4,700 lb Boom Swing 360 degrees Manpower Required one operator Standard Track 30' Lifting Capacity 1,480 lb

30" Morbark Chip Blower. Located in SD. #C946

628 Morbark Debarker (for Poles) with chop-to-length system and sorter. Located in SD. #C947

1993 Morbark Model 1200 Tub Grinder, Equipped with a Cummins 650 HP Engine, Autofeed, Wireless Control, New Clutch 1 year ago, Hours are Unknown, New Turbo, New Injectors 300 Hours ago, Ready to Work. Weight 55,622 lb Length 38.15 ft Width 11.9 ft Height 12.8 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Morbark 58" 3K Chipper w/150Hp 1725 RPM Motor

2015 Morbark 1300B Track -10,400 hours -C27 No Blow by -One owner machine -Uc is in good condition -Had recent mill work completed Ready to Grind !!!!!!

Morbark Chip Blower

Morbark 48" Horizontal Infeed Vertical Discharge with Dust Blower Off Chip Pack

Morbark 640 System Log Deck, Infeed Trough, Head Cab & Controls, Outfeed with 3 Arm Kicker, Bark Conveyor.

Morbark 20HP HPU