Equipment For Sale

COSTA - KK CC-CCC 1350, ...5-Head Top & Bottom Wide Belt Sander.53" Width capacity; (2) Bottom drums, (3) Top drums.Bottom Machine: -- Constant pass line height: 1,000 mm (39"). -- Motorized infeed conveyor. -- Motorized infeed pressure rollers. -- Sectioned infeed pressure beam.1st Head: -- Rubber covered cylinder ,16" dia., 35 kW motor. -- Intermediate pressure shoe with lips and rubber covered rollers.2nd & 3rd Heads: -- Rubber covered cylinder, 16" dia. (2nd head), 52 kW motor (3rd head), 88 kW. -- Outfeed pressure shoe with lip and rubber covered rollers. -- Vacuum Feed Table: 10 HP (7.5 kW) motor. -- Vacuum set pneumatic for (2) levels of vacuum pull control.Top Machine: -- Infeed roller. -- Motorized infeed pressure rollers. -- Sectioned infeed pressure beam.1st Head: -- Rubber covered cylinder, 16" dia., 35 kW motor. -- Intermediate pressure shoe with lips and rubber covered rollers.2nd & 3rd Heads: -- Rubber covered cylinder, 16" dia. (2nd head), 52 kW motor (3rd head), 88 kW -- Outfeed pressure shoe with lip and rubber covered rollers. -- Vacuum Feed Table - 10 HP (7.5 kW). -- Vacuum set pneumatic for (2) levels of vacuum pull control..Equipped with and Features: -- All drives are equipped with disc brakes. -- Each Sander with vacuum feed belt with fans..

Costa 53" Sander Model 80 CT 1350 Wide Belt Sander (2) Machines available!

A. Costa Spamatic 220 Molder

COSTA KH2 CCCT 1350 Wide Belt Sander, (4) Heads52" Width cap. Drum, Drum, Drum, PlatenHead Configuration:1st Head: Steel contact roll, 9-7/8" dia, 45 HP motor;2nd Head: Rubber covered contact roll, 9-7/8" dia, 45 HP motor.3rd Head: Rubber covered contact roll, 9-7/8" dia. 60 shore, 30 HP motor.4th Head: Finishing Platen, 23 HPSpecifications: -- 53" x 103" Abrasive belts, air blast abrasive belt cleaning, pneumatic belt tensioning with electronic tracking. -- Controls with PLC processor, -- Pneumatic grit compensation with 4-position stops. -- Variable feed speed conveyor with inverter control 16 - 82 FPM.Equipped with & Features -- a Vacuum conveyor bed assembly with a 5.5 HP suction fan and motor. -- Infeed & outfeed spring loaded hold down shoes on all heads. -- Powered raise & lower conveyor bed with LED readout and motor load meters.

COSTA LEVIGATRICI WD7-CCCC-600 Steel Plate & Part GrinderSpecifications: -- Max. finishing width 23.64" -- Max. thickness of mild steel 6.3" -- Number of grinding heads (4) -- Motors (1 & 2) 30 HP -- Motors (2 and 3) 20 HP -- Machine weight 14,700 LbsEquipped with: -- Schneider Magelis control with display -- (4) Load meters -- Variable speed heavy duty pass-through conveyor & exit metal roller conveyor -- Coolant system with paper filtration -- Manuals

Log press as pictured Main motor (k) 15 Auxiliary motors (K) 1,5 + 1,5 Operating pressure (Bar) 170 - 210 Hourly production with wood chips and sawdust (kg) 120 - 150 Briquette @ (mm) 70 Briquette Length (mm) 30 - 300 Weight (kg) 1650 2180 Dimensions in millimetres (mm) 1700 1720

Cousins LP-SW Wrapper 115Volt 1 Phase Folded down for shipping

Cousins Stretch Wrapper Model LP-SW s/n 250511-5L 9079

Cousins LP2100X Wrapping Machine 115 Volt 1 Phase

Covel Grinder

CP MANUFACTURING - CP100: Can Flattener -- 220 V; 1,200 Lbs per hour. -- Infeed Conveyor. -- Magnetic Separator. -- New belt included.

CP CD1000 CAN DENSIFIER -- 900 to 1,500 Lbs/Hr capacity -- Fully automatic solid-state Controller -- Density: 40 Lbs per cu. ft. allowing 140,000 Lbs in 50' railcars or 40,000 Lbs in 40' Trailers. -- 10 HP - 3/60/208/230/460 Volt Hydraulic Power Unit

CP250 Can Flattener --230v 3 phase --1 Blower Tube Included --Infeed Conveyor --Magnetic Separator --Up To 2000 Lbs Of Whole Cans

CP MANUFACTURING - S100-6-LH-US, ...Screens -- (1) System of (2) Screens -- Very lght Use -- Ordered as part of a Single-Stream Sort System that was designed to run 10 Tons/Hr -- 1-Feed Conveyor -- Each: 14,500 Lbs -- Loaded onto your Truck

CAN-PAK - CD-3000: Complete Can Densifier -- Motor: 25 HP.Dimensions• Height: 9’-2";.• Width: 3’-10";.• Length: 13’-5";.• Machine weight: 8,000 Lbs.• Conveyor weight: 1,000 Lbs.• Conveyor: 11’-5"; High x 20-1/2"; wide x 13’ long.Specifications• 25 HP Power unit.• 460 Volt, 3-phase wiring.• Solid-state programmable controller.• Thermostatically controlled hydraulic oil cooler.• 1 Cubic yard hopper.• 120-gallon hydraulic tank.• 20-1/2"; Wide infeed conveyor with: 3/4 HP Motor. Direct drive gear reducer. Magnetic head pulley. Steel reject chute.

CPM Model 2A2 Vertical Pellet Cooler Rated up to 10 TPH on 1/4" Pellets

Onsrud M Series CNC Router 5'x12' Table Vacuum pump Includes: Nederman S1000 Dust System

- Dual Supported Gantry: Enhances stability and precision with independent servo motors and drives on both sides. - 18 HP Spindle: High-power, fully programmable, and capable of reaching 24,000 RPM, suitable for a wide range of routing and drilling tasks. - 5'x20' Phenolic Vacuum Grid Table: Ensures superior material hold-down through vacuum zones, ideal for flow-through spoil boards or dedicated fixtures. - Integrated Dust Collection System: Keeps the work area clean with integrated dust extraction hoods for chip removal during operations. - 12-Tool Dynamic Automatic Rotary Tool Changer: Facilitates efficient tool changes, with a fully servo-controlled system for quick transitions between tools. - OSAI PC Front Series Controller: Provides advanced control options with a high-resolution touch screen, PLC capabilities, and compatibility with AlphaCAM for programming automation. - 11-inch Z-Stroke: Suitable for various materials and applications, offering flexibility with under-bridge clearance. - 2-Year Warranty: Includes full parts and labor coverage, ensuring reliability and long-term operational support. Included Options: - 9 Spindle Drilling Block Package: Allows for simultaneous or independent drilling along the X and Y axes. - Pneumatic-Controlled Vacuum Table Switch: Actuated via a push-button or PLC control for precise operation. - 20 KVA Isolation Transformer: Ensures stable power supply and noise filtering for optimal performance.

Model: CR Onsrud 145M12 [ 3 axis ] - Ready to load! [Fanuc Control](Multi Axis Motion Controller - Power Motion i-MODEL A | FANUC) Machine Size: 231" L x 112" W x 91" H Table Size: 61" x 145" Spindle: 12Hp Spindle Accessories: 3 Vacuum Zones, ATLM System (METROL) Precisely measures the length of your tool and automatically feeds that value into your CNC machine controls. 24,000 RPM

CR Onsrud Inverted Router more information to follow