Equipment For Sale

1993 Baker 4 Head Resaw Approx. 50 blades Size: 13' 2" x 1" x .035" x 1/2" Tooth Carbon Resaw Blade Saw 1 needs a new spindle. Hydraulic drive. New Main Breaker New Fuses A couple of Starters have been replaced. Approximately 6,240 Hours Baker 4 Head Resaw Specifications Guide System: Baker Low-Profile Flat Guide System with steel guide plates for enhanced precision. Saw Dust Outlet: Dimensions: 6"x6" (15.24 cm x 15.24 cm) square. Outlet Adapter: 90° adapter chute to a 4” (10.2 cm) diameter outlet. Rotation: Can be rotated for discharge in four directions. Recommended Airflow: 600 CFM (17 m³/min). Motors: Main Motors: 20 HP, 3-phase motor on each head. Inline Hydraulic Pump Motor: Cutting Capacity: 6" x 12" (15.24 cm x 30.48 cm). Feed System (3-Sided Feed Works): Rough-top belting for traction. Powered side feed rollers for smooth material handling. Non-powered hold-over wheels. Feed Speed: Fully variable, adjustable from 20 to 120 feet per minute (6 to 36 meters per minute). Delivery is available at the buyer’s expense

1992 Baker 6 Head Resaw Six-Head "C" Saw 1 needs a spindle and wheel replacement. Approximately 8,320 Hours Serial Number 92-379 6 Motors (30) HP (37) Amps Mechanical Drive

480V | Model # BBR-0 "A" | Serial # 09-4089

Baker Band DBL End Trim Saw with Belt Waste Conveyor & Hyd Drive

Model C 20 HP W Return Over Head Side Power Rollers

Baker Mill Like NEW

Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide

Baker single head resaw, Model; BBR-O, Serial#; 04-3371, has tilting infeed belt w/ digital display, electric drive, includes spare parts/ blades, excellent condition

Model 3650E with Baker (3) Strand Infeed Deck Excellent condition Hydraulic over electric general factory networks. Hooked up to power and ready to be demonstrated.

2 strand transfer deck, 28" wide x 14' long, #80 roller chain, no drive, good condition

Baker single head resaw, 12" wide capacity, 25hp electric drive on head, includes 2 end-around tables to make complete run-around system, price includes going through shop and is ready for production

2 - Baker Stacking Racks available

Baker Dominator 3650E Sawmill Edmiston Edger Morbark Chipper with diesel engine All decks and rollers

Baker 2-Head Resaw 20 HP Motors Return Conveyor

Accepts material up to 12" x 12" and uses a 12"-wide conveyor Main Drive Motor: 30 HP TEFC Variable feed speed from 0-95 feet (0-29 m) per minute 28" Dynamically balanced solid metal band wheels 4" diameter dust outlet requires 500 CFM REDUCED LOW HOUR MILLWORK MACHINE

2019 Baker Ambi-Trim | 6 Heads | Infeed System w/ Unscrambler | 20' Max Length | Good Running Condition | 480V

1997 Baker 4 HD Resaw with Full Return

Late 90's model | 480v

2013 Baker M4I DeDuster with hopper infeed and variable speed drive and three 2hp brush heads. Electric complete with 480 voltage, panel, and pedestal mounted start and stop station. $6,500.00

Brand new...never used...still on the original pallet.