Equipment For Sale

1993 Baker 4 Head Resaw Approx. 50 blades Size: 13' 2" x 1" x .035" x 1/2" Tooth Carbon Resaw Blade Saw 1 needs a new spindle. Hydraulic drive. New Main Breaker New Fuses A couple of Starters have been replaced. Approximately 6,240 Hours Baker 4 Head Resaw Specifications Guide System: Baker Low-Profile Flat Guide System with steel guide plates for enhanced precision. Saw Dust Outlet: Dimensions: 6"x6" (15.24 cm x 15.24 cm) square. Outlet Adapter: 90° adapter chute to a 4” (10.2 cm) diameter outlet. Rotation: Can be rotated for discharge in four directions. Recommended Airflow: 600 CFM (17 m³/min). Motors: Main Motors: 20 HP, 3-phase motor on each head. Inline Hydraulic Pump Motor: Cutting Capacity: 6" x 12" (15.24 cm x 30.48 cm). Feed System (3-Sided Feed Works): Rough-top belting for traction. Powered side feed rollers for smooth material handling. Non-powered hold-over wheels. Feed Speed: Fully variable, adjustable from 20 to 120 feet per minute (6 to 36 meters per minute). Delivery is available at the buyer’s expense

Baker High Speed Deduster

1995 Baker MDL BBR-O 3HD Band Resaw

Baker Band DBL End Trim Saw with Belt Waste Conveyor & Hyd Drive

Baker 12" resaw w/ cross over chains and return. Machine has four sets, all manual, line shaft ready. Located in PA. #C916

480V | Model # BBR-0 "A" | Serial # 09-4089

Baker M4 In Line Deduster

2010 Baker 2hd Resaw with return. #00901 More Photos Coming Soon!

Baker 16" Blue Streak Grade Resaw w/Cab & Setworks

3650 Baker Super Streak Mills

Baker C Resaw with Return. Located in NY. #C929

Baker Band Resaw BBR-O Return Conveyor

Baker model a bandsaw with return conveyor

The Baker M4i DeDuster has been designed to be a super-high-performance dust removal machine that will accept and remove sawdust from the highest production multi-head horizontal band resaw today. The M4i DeDuster can operate at over 700 feet per minute! Boards drop into the M4i DeDuster hopper. The hopper’s height adjustment (for the amount of lumber), indexable stops (for the length of the lumber), and adjustable fence (for the width of the lumber) allow you to set it up for the most efficient operation. This virtually eliminates jam-ups. The hopper’s variable-speed conveyor sends the lumber through the M4i DeDuster chamber one piece at a time. The rear height adjustment of the conveyor can be adjusted from a minimum of 24" and up to 34" maximum. Inside the M4i DeDuster chamber, high-speed brushes clean all four sides of the boards. The independently powered brushes are fully adjustable for longer brush life. The specially designed chamber maximizes air flow, directing the dust out the dust chamber instead of back onto the boards. The entire side of the chamber easily opens for full open accessibility. The Baker M4i DeDuster comes with its own electrical panel and a stand-mounted, remote start/stop control station.

Baker Band Resaw Return conveyer 480 volt 3 phase 6" x 12" capacity

Baker Mill Like NEW

Model C 20 HP W Return Over Head Side Power Rollers

Baker single head resaw, Model; BBR-O, Serial#; 04-3371, has tilting infeed belt w/ digital display, electric drive, includes spare parts/ blades, excellent condition

Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide

2 strand transfer deck, 28" wide x 14' long, #80 roller chain, no drive, good condition