Equipment For Sale

DONALDSON / TORIT DWST6-5 Cartridge Dust CollectorDownflo® WorkStations (DWST) fit anywhere on the plant floor and apply NO restrictions to worker movements or visibility. The full line of WorkStations are designed specifically for those in-plant areas where dirty and/or noisy operations are out in the open—grinding, sanding, chipping, batch mixing or welding. The DWST delivers exceptional performance in metalworking, woodworking, and process applications where high filtration efficiency and ledge less construction is often a requirement. Specifications: -- (5) Module System, each with 10 HP motor, 7,000 CFM. -- (4) Ultra-Web cartridges. -- Pulse-cleaning manifolds and ventures, (2) dust drawers. -- (1) Acoustical panel per module. Louvers mounted on lower section of unit.Includes: -- (1) IEC control panel includes 460-volt motor starters, circuit protection for each motor, transformer, programmable logic controller. -- Magnehelic gauge mounted in a panel door, start/stop buttons, and a through-the-door disconnect switch. -- Pulse cleaning can be continuous or after-shift. -- All components are IEC rated. The enclosure is rated Type 12. -- 1"; Compressed Air Regulator with Filter Separator and Gauge, Black Iron Fittings, and Black Iron Piping Required for Cleaning System. -- Provides a 1"; Common Connection Point for Design Shutters to Tie into with Existing Compressed Air System.

24 AN Valve | Serial #: 2071507 | 460V 3PH | 30HP Motor

YORK-DONLEE 200HP propane gas boiler and associated controls. Boiler was operated only 5 years. Boiler has been drained and taken care of and removed from service along with the condensate tank. Old controls are available, but suggest purchasing new controls.  See pictures for all information regarding pressure, etc. Offered as-is/where-is with no warranties or guarantees, and loaded on your truck. Price $22,000. OBO.

2018 Doosan DL250-5, Hydraulic Coupler, Aux Hyd, Bucket. Clean Machine.

2011 Doosan 225DX Manuel thumb but is plumbed for hydraulic attachments UC is good (65-75%) Machine needs nothing Ready for the job site

DOOSAN DL200-5 (US10) Wheel LoaderSpecifications: -- Engine Model: 1204F -- Gross Power: 142 HP -- Power Measured @ 2200 rpm -- Max. Speed - Forward: 24 mph -- Max. Speed - Reverse: 12 mph -- Fuel Tank: 45 galEquipped with: -- US10 Package -- GP Bucket -- Coupler

2016 Doosan DX140LCR-5, Hydraulic Thumb, 36" Digging Bucket, 4320 Hours, Rubber Pads on Steel Tracks.

DOOSAN DL220-5 Wheel LoaderSpecifications: -- Engine: 160 HP -- Bucket Width: 8.37ft in -- Fuel Capacity: 58.7 gal -- Max Speed - Forward: 24.3 mph -- Hours: 5,514

2014 Doosan DX225LC Excavator with 4,800 hours. Length 32’ Height 10’ Width 10’ Weight 52,086 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

DOOSAN portable lighting with only .2 hours.

2017 Doosan DL250 Wheel Loader, 650 hours with scales. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Doosan DX225LL-5 Log Loader, High Rise Cab, Low 4150 Hours, Rotobec Grapple, Live Heal. Machine is in excellent shape, inside and out.

2007 DOOSAN DX420 15,694 Hours Hyd thumb Serial # 526 Runs and operates as it should

DOOSAN DX85R-3 Compact Crawler Excavator with Brush CutterSpecifications: -- Yanmar Engine: 59.4 HP (44.3 kW ) -- Max. torque at 1365 RPM 24.6 kgf/m (241 Nm) -- Max. swing speed: 9.5 RPM -- Boom swing angle: L/R 70° / 55° -- Travel speed: (low - high) 1.6 to 2.92 MPH (2.7 - 4.7 km/h) -- Maximum gradeability: 35° / 70% -- Hours: 350 (in use)Equipped with: -- 50" MTL XC5 Brush Cutter -- 60" Ditching bucket -- 36" Digging bucket -- 24" Digging bucket -- Hydraulic quick coupler -- Hydraulic thumb -- Front blade -- Roll Over Protective Structure (ROPS) -- Pressurized, sound-insulated cab -- Adjustable seat with adjustable headrest and armrest -- Air conditioning -- Pull-up type front window and removable lower front window -- Sliding right windows with lock -- Ceiling light

DOOSAN DX-180LC-3 Crawler Excavator Specifications: -- Engine Model: DL06 -- Gross Power: 122 HP -- Track Size; 24" -- Bucket: 42" -- Max Cutting Height: 29.37ft inJ -- Max Loading Height: 20.54ft inK -- Max Reach Along Ground: 28.19ft inL -- Max Vertical Wall Digging Depth: 15.29ft inM -- Max Digging Depth: 18.77ft in -- Operating Weight: 38933 Lbs -- Fuel Capacity: 74 galEquipped with: -- Auxiliary Hydraulics -- Hydraulic Quick Coupler -- Hydraulic ThumbNote: Hours approx. 4,165 and being used.

2020 Doosan DX225LL-5 Log Loader, Rotobec Grapple with Live Heal. Low hours ready for work.

2021 Doosan DX225LL-5, Ryans Dangle Grapple with Saw, Clean Low Hour Loader, Ready to go to work.

2019 Doosan DX225LL-5 With 3,600 hours, Still has Warranty, Rotobec 360 grapple. Weight 48,722 lbs Length 31.31 ft Width 9.8 ft Height 9.8 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

DOOSAN DX300LC-3 LONG REACH ExcavatorSpecifications: -- Engine Type: Doosan Horsepower: 213 HP (159 kW / 216 PS) -- Engine Cylinders: 6 -- Boom reach: 60' -- Track width: 33.5" -- Hours: 2,800Equipped with:60 ft long reach boom60" Bucket

2020 Doosan DX50 Mini Ex, Hydraulic Thumb, Tag Manual Coupler, Bucket, Good Running Machine.