Equipment For Sale

GRIZZLY - G1026, ...Single Speed Shaper w/Feeder & Mobile Base3 HP - 3,450 RPM Motor; 1/2", 3/4" & 1" dia. interchangeable spindles; 2-1/2" spindle cap. under the nut and with 3" spindle travel. -- (2) Spindle speeds of 7,000 or 10,000 RPM; reversing spindle switch. -- Features: 28-1/4" x 21-3/4" table; 34" table height.Complete with: Magnetic spindle brake, adjustable fence & 3" dia. dust extraction outlet.3-Roll 4-Speed Power Feeder & Mobile Base!

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i60 GRIZZLY G0673 5,360 CFM 4-Bag Portable Dust Collector Specifications: 10 HP, Cloth filtration bag size 23-5/8" Diameter x 70" L, 2.5 micron, plastic collection bag size 23-5/8 Diameter x 54" L, Total collection bag capacity 48 cu. ft. Airflow capacity: 5360 CFM, Intake port(s): 5 x 4 in., Sound rating 98 dB Includes: (4) Waste Barrels NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

Gizzly Stationary Log Loading Knuckleboom

Grove TMSA250A Truck Crane Mdl 2504 S/N 36186 80' Boom Carrier Model 6425G S/N 1514001 With Box of Slings & Shackles

2008 Grove RT600E Crane 60 ton 8630 hours Twin winches Jib 70% rubber 2010 with 10108 hours also available

There are (7) Table available.

Gruber Systems 12’ Vibration Conveyor Tables with 230V 3 Phase Vibrators Seven Available. Six with Vibrators and one without. These powerful 3-phase electric vibrator-equipped Vibe Tables offer heavy-duty performance, quieter operation, and lower compressed air volume requirements compared to pneumatic vibrator equipped tables. Specifications: Frame: Height (to top of wheelway): - 28” (71.12 cm) Width - 24” (61 cm) Length - 120” - 144” (304.8 - 365.76 cm) Wheelway (wheel center to wheel center): Width - 20-1/8” (51.12 cm) Pneumatic Vibrator (@20 psi): PSI required to Start - 25 PSI (1.75 kg/cm²) Vibrations Per Minute (VPM) - 3,200 Force - 255 lb-force (115.6 kg-force) Flow - 9 CFM (0.25 m³/minute) Electric Vibrator (220/440 volt, 3Ø, 60hz. @ 10% setting) Vibrations per Minute - 3,456 VPM Pounds of force - 230 LB Full load current - 1.26 / .69 Amps Starting current - 9.8 / 4.9 Amps

Gruendler 50XD Wood Hog Pkg, s/n 21419, built in 1972, 59" wide x 73" across-the-shaft top infeed opening, bottom discharge, with estimated 2" to 3" square hole screen grates, mounted on steel subbase for direct coupling 350hp 885rpm 575vac motor with Falk coupling. Includes magnetic separation system.

Grutter Window Splay with 5.5HP Motor and Grutter Cable Saw.

Grutter Mortison Tennoner Machine with (2) 25HP Motors, control Panel & Valves.

Grutter Tongue Remover with 15HP Motor

Grutter Birdsmouth Rafter Saw

Grutter End Groover with 10HP Motor and control Box

Grutter Dato Blade Windstop Machine with (2) 10HP Motors & 3/4HP Gearbox

Grutter Dado Blade Windstop Machine with 2 10HP Motors

Grutter Pop Up Saw 18" Blade. 10hp Motor. Located in MI. #C964

GS - HEAVY-DUTY 34 KVA, ...Transformer.SCR Drive Transformer. -- Cat # DT631H34S. -- High voltage 575 Volts Delta; Low voltage 230 Y/133.

GSM Dust Blower with 100HP Motor, 50" Dia. Fan Blade, 23" Inlet & Outlet Serial#1347