Equipment For Sale

DONALDSON / TORIT DWST6-5 Cartridge Dust CollectorDownflo® WorkStations (DWST) fit anywhere on the plant floor and apply NO restrictions to worker movements or visibility. The full line of WorkStations are designed specifically for those in-plant areas where dirty and/or noisy operations are out in the open—grinding, sanding, chipping, batch mixing or welding. The DWST delivers exceptional performance in metalworking, woodworking, and process applications where high filtration efficiency and ledge less construction is often a requirement. Specifications: -- (5) Module System, each with 10 HP motor, 7,000 CFM. -- (4) Ultra-Web cartridges. -- Pulse-cleaning manifolds and ventures, (2) dust drawers. -- (1) Acoustical panel per module. Louvers mounted on lower section of unit.Includes: -- (1) IEC control panel includes 460-volt motor starters, circuit protection for each motor, transformer, programmable logic controller. -- Magnehelic gauge mounted in a panel door, start/stop buttons, and a through-the-door disconnect switch. -- Pulse cleaning can be continuous or after-shift. -- All components are IEC rated. The enclosure is rated Type 12. -- 1"; Compressed Air Regulator with Filter Separator and Gauge, Black Iron Fittings, and Black Iron Piping Required for Cleaning System. -- Provides a 1"; Common Connection Point for Design Shutters to Tie into with Existing Compressed Air System.

YORK-DONLEE 200HP propane gas boiler and associated controls. Boiler was operated only 5 years. Boiler has been drained and taken care of and removed from service along with the condensate tank. Old controls are available, but suggest purchasing new controls.  See pictures for all information regarding pressure, etc. Offered as-is/where-is with no warranties or guarantees, and loaded on your truck. Price $22,000. OBO.

DOOSAN DL220-5 Wheel LoaderSpecifications: -- Engine: 160 HP -- Bucket Width: 8.37ft in -- Fuel Capacity: 58.7 gal -- Max Speed - Forward: 24.3 mph -- Hours: 5,514

2007 DOOSAN DX420 15,694 Hours Hyd thumb Serial # 526 Runs and operates as it should

DOOSAN portable lighting with only .2 hours.

2017 Doosan DX300 LL, 6000 hrs., w/Southstar QS605, $300,000

2018 Doosan DL250-5, Hydraulic Coupler, Aux Hyd, Bucket. Clean Machine.

New Doosan DX225LL Log Loader in Stock, Call today for excellent pricing.

New Doosan DL280 Wheel Loader, Hydraulic Coupler, Bucket. Call today for pricing.

2011 Doosan 225DX Manuel thumb but is plumbed for hydraulic attachments UC is good (65-75%) Machine needs nothing Ready for the job site

2018 Doosan DL220-5 Wheel Loader, In Stock Ready to go, JRB Hydraulic Quick Coupler and 3 Yard Bucket.

2010 Doosan dX140LC -5400 hours -A/C and heat work -Power pack is a browns Brontosaurus Brand with a deer 4045 engine making a 125HP -Includes -Ryan’s equipment stump grinder -Tag brand bucket 36” dirt bucket with tag quick coupler - Bodine demolition grapple -Also have a brand new denis Cimaf tilt system I can add in for extra cost Ready to work

2016 Doosan 225 with rotobec 360 grapple. Weight 44,200 lb Transport length 31.5 ft Transport width 9.8 ft Transport height 9.78 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Doosan DX225LL-5 With 3,600 hours, Still has Warranty, Rotobec 360 grapple. Weight 48,722 lbs Length 31.31 ft Width 9.8 ft Height 9.8 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Doosan DX225LX-3 Excavator with a Fecon Mower Attachment along with Stump Grinding Attachment. Fecon Model BH80 Pony Motor with Caterpillar C-7 with 300 Hours. The Doosan has 4,000 Original Hours, Bearings on Mower were done 100 Hours Ago, Good Undercarriage, Enclosed Cab with Heat and Air Conditioning. Operating Weight 48,281.3 lb Ground Clearance 1.58ft in Height To Top Of Cab 9.77ft in Length Of Track On Ground 14.59ft in Tail Swing Radius 9.16ft in

2015 Doosan DX225LC Excavator 7141 hours Hyd thumb Heat AC UC 80% Plumbed for aux hyds Extra counter weight Very little play in bucket bushing Runs and operates good Using daily

2018 Doosan 225 with 5,700 hours, Quick Coupler, Hydraulic Thumb, Digging Bucket, HD Counter Weight, Forestry Cage on cab. Operating Weight 47399.4lb Shipping Length Of Unit 10ft in Shipping Height Of Unit 10.21ft in Width To Outside Of Tracks 9.81ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

DOOSAN DX-180LC-3 Crawler Excavator Specifications: -- Engine Model: DL06 -- Gross Power: 122 HP -- Track Size; 24" -- Bucket: 42" -- Max Cutting Height: 29.37ft inJ -- Max Loading Height: 20.54ft inK -- Max Reach Along Ground: 28.19ft inL -- Max Vertical Wall Digging Depth: 15.29ft inM -- Max Digging Depth: 18.77ft in -- Operating Weight: 38933 Lbs -- Fuel Capacity: 74 galEquipped with: -- Auxiliary Hydraulics -- Hydraulic Quick Coupler -- Hydraulic ThumbNote: Hours approx. 4,165 and being used.

DOOSAN DX300LC-3 Long Boom Hydraulic Crawler ExcavatorSpecifications: -- Engine Type: Doosan -- Horsepower: 213 HP (159 kW / 216 PS) -- Engine Cylinders: 6 -- Boom reach: 60' -- Track width: 33.5" -- Bucket Size: 72" Equipped with: -- Joystick Controls w/ Switchable Control Patterns -- Rearview Camera -- New Bushings & Pins in Bucket Knuckle -- Hours: Approx. 3,500 (still in use)

2020 Doosan DX225LL-5 Log Loader, Rotobec Grapple with Live Heal. Low hours ready for work.