Equipment For Sale

1996 CAT 928F 7,300 Hours - Original and Accurate Cab Good Tires Strong Running Loader

CATERPILLAR 311D Hydraulic ExcavatorThe 311D’s hydraulic system is designed for high efficiency and performance. Spacious and quiet, this world class cab lets the operator focus on performance and productivity.Specifications: -- Engine: Caterpillar C4.2 Acert Turbo Diesel 2-Speed -- Net Power @ 2200 RPM: 60 kW / 82 HP -- Bucket size: 28" -- Thumb: 13.5" -- Steel Tracks: 23.5" Equipped with: -- Pre-start Check and Monitor Display -- Heat -- AM/FM StereoNote: Serviced approx. 100 hours ago and has 4732.5 hours total. A "gray market" Caterpillar machine with parts available.

CATERPILLAR 309 CR Mini Hydraulic ExcavatorThe 309 CR Mini Excavator delivers maximum power and performance in a mini size to help you work in a wide range of applications. Specifications: -- Engine: Model Cat C3.3B -- Rated Net Power @ 2,200 rpm -- U.S. EPA Tier 4 Final: 52.4 kW / 70.3 HP -- Machine Swing Speed 10.6 RPM -- Travel Speed – High 4.9 km/h 3.1 MPH -- Travel Speed – Low 2.6 km/h 1.6 MPH -- Fuel Tank 147 L 39 gal Equipped with: -- Sealed and Pressurized Cab -- Steel Tracks with Pads -- Stick Steer Mode -- Travel Cruise Control -- Control Pattern Changer -- Bucket -- Hours: 862Additional attachments available for extra cost upon request

CAT 508 Skidder

CATERPILLAR 303E CR Mini Hydraulic ExcavatorThe 303E CR Mini Hydraulic Excavator delivers high performance, durability and versatility in a compact design to help you work in a variety of applications.Specifications: -- Engine: Cat C1.3 -- Gross Power: 24.8 HP(18.5 kW) -- Travel Speed (Low): 1.5 MPH (2.4 km/h) -- Travel Speed (High): 2.8 MPH (4.5 km/h) -- Vertical Wall: 77" (1960 mm) -- Boom In Reach: 83" (2110 mm) -- Dig Depth: 108" (2750 mm) -- Machine Swing Speed: 9.00 rpm -- Boom Swing – Left: 80° -- Boom Swing – Right: 50° -- Fuel Tank: 11.90 gal -- Hours: 465Equipped with: -- 1-way and 2-way (combined function) auxiliary hydraulic lines -- Hydraulic thumb -- Manual quick attach -- Control pattern changer -- Dozer blade with float function -- Foot travel pedals -- Rubber track -- Standard stick -- Suspension seat

2017 Cat 330FL Excavator, 6126 hours, Rear camera, Cage, It needs a cylinder for the hydraulic thumb, U/C in very good condition. Weight: 69,950 lbs Length: 34.08 ft Width: 10.83 ft Height: 11.08 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2023 Caterpillar 323SL Excavator, 200 Hours, 3D $55,000, Like New

28" Pads, 36" Bucket, Cab w/ AC, Standard Boom, Standard Track

CATERPILLAR 316FL Crawler Excavator Specifications: -- Reach Boom -16'9" (8'6") Stick -- Max. Digging Depth: 20' -- Max. Reach - Ground Level: 28.83' -- Max. Cutting Height: 29.25' -- Max. Loading Height: 20.58' -- Max. Loading Height: 7.5' -- Max. Depth Cut for 2440 mm (8'0") Level Bottom: 19.33' -- Max. Vertical Wall Digging Depth: 16.25' -- Bucket Digging Force - SAE: 22000 IBF -- Bucket Digging Force - ISO: 25000 IBF -- Stick Digging Force - SAE: 15500 IBF -- Stick Digging Force - ISO: 18000 IBF -- Operating Weight: 39710 Lbs. -- Max. Drawbar Pull: 35053 IBF -- Max. Drawbar Pull: 35053 IBF -- Max. Travel Speed: 3.2 MPHEquipped with: -- Auxiliary Hydraulics -- Quick coupler -- 4,176 hours

2004 CAT 257B Skid Steer High Lift Approximately 5700 Hrs. On Machine UC: Good Operates as it Should Go Right to Work!

2005 CAT 525B, CAT 3276 Motor, Runs Like New, $30,000

New Sets of 28” Single Grouser Pads for Timbco 445

2002 Caterpillar 500 KW Generator 850 Hours Low Voltage Output Two Available

2004 800KW Cat Gen Set S/N 00000TTFT00197. 12,700 Hrs

CAT “C” Series Skid Steer Lexan Door 1/4” or 3/8” or 1/2” Starting at $450 New Holland Skid Steer Lexan Door 1/4” or 3/8” or 1/2” Starting at $450 - Call 715.560.3929

35.5 tires, dual arch, winch, heavy duty axles, solid powertrain, call for more details.

2007 Caterpillar 525C Grapple Skidder C7 engine Dual arch Winch 13500 hours 30.5 tires Will need two batteries

MLS Number 11194711 1991 Caterpillar 518C Grapple Skidder Hour meter not working 28L tires at 60% Young 72" grapple. Snubber and cylinders need packing. Winch needs repaair.

2011 Caterpillar 573 Feller Buncher Joysticks Hotsaw No cracks in disc 2000 hours on rebuilt engine 12k frame hours Nice cutter Price Reduced STOCK IMAGE (Photos Coming)

2008 CAT 501HD TRACKED HARVESTER 6 CYL CAT REBUILT ENGINE BY MICHIGAN CAT WITH WARRANTY FOUR ROLLER HEAD