Equipment For Sale

MURPHY-RODGERS - MRSE-14-RAL: Baghouse Dust CollectorSpecifications: 14" Inlet dia.; 4,836 CFM; (63) bags with: 520 Sq./ft. filter area; 9.3:1 air-to-cloth ratio; 20 HP fan motor; primary separator built into unit; secondary separation of fine particles by filter bag section; -- Equipped with: -- Rotary Air Lock. -- Fully automatic shaker controls with: Electric shaker as standard; consists of panel box with shaker starter; transformer for 115 V circuitry; solid-state timer for fan deceleration & shaking cycle. -- All necessary relays and internal wiring inside the panel box.

Murphy Rogers MRT-12AS Dust Collector

MURPHY-RODGERS - MRSE-24: RAL Dust Collector; loaded with features. -- General Data: Self-contained baghouse, approx. 15,000 CFM with 1,913 sq./ ft. of filter area based on: 7.8 to one Air-to-Cloth-Ratio. -- Fan/Motor: 40 HP BALDOR motor; 22" dia. inlet; primary separator built into the unit; secondary separation of fine particles by filter bags. -- Equipped with: 16" Dia. bottom dump outlet controlled by a Rotary Air Lock with: Approx. 18" dia. discharge outlet. -- Complete with: (2) Electric motor driven automatic bag shakers; angle frame truck height support stand with walkway platform and full height ladder to access top of unit.Fan/motor mounted on top of the collector. -- Includes: Magnetic starter. control panel; silencer; explosion doors. -- Approx. dims.: 84" x 85" x 32' High; 6,100 Lbs.

MURPHY-RODGERS - MRT-12 AS, ...Dust Collector (Interior) -- Specifications:Motor: TEFC 10HP, 230/460, 3 PH; Inlet diameter: 12"; Collection Outlet Opening: 11″; (1) Four (4) bag unit; 3,500 CFM. -- Floor space: 62" Wide x 102" deep x 118" high. -- NOTE: (4) Barrels (as pictured) are included!

MURPHY-RODGERS MRJ-610-122 Pulse Jet Dust Collector with Rotary Air Lock and Transfer Fan.Specifications: -- 8,500 CFM approx. @ 9 to 1 air to cloth ratio baghouse dust collector with (60) 10-feet long filters; total cloth area of 943 sq. ft. -- Filter Cleaning: Continuous Self-cleaning Using Compressed Air. -- Main Fan: 30 HP top-mounted blower motor. with approx 18" dia. inlet. --System includes: Relay/Transfer fan, steel structure support stand, low height as waste is transferred by fan, safety ladder/platform, top safety railing, and approx. 16" Rotary Air Lock.Actual model is MRJ 610 -122.

MURPHY-RODGERS HEC-216-S/10 33,000 CFM Continuous Duty Automatic Self-Cleaning Pulse Jet Baghouse Dust Collector Equipped with: (216) 5" Dia. x 10' L Cloth filter bags for a total of 2,827 sq/ff. of filter area. (2) 42-1/2" W x 68" H & (2) 40-1/2" x 68" H Top access doors. (3) Front & (2) side 27" W x 54" H Filter access doors. (2) Square cone bottom hoppers, Each with, 25" x 25" Discharge openings. System utilizes (2) 4-1/2’ x 6’ x 4’ H Waste containers (NOT included). CHICAGO 100 HP - 1,780 RPM Roof-mounted blower, with 41” Dia. inlet. Motorized dampers for winter & summer modes. Winter mode: Directs air back into building, reducing heat loss. Summer mode: Directs air outside, cooling building. Electrical controls (as pictured). Complete with: Spare Filter Bags. NOTE: Installed Used in 2016 with "New" 100 HP motor, new bearings in blower & "New" spring mounts. NOTE: Variable Frequency Drive needs to be replaced. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

Murphy Rogers MRM-16-185H Shaker Dust Collector 16” dia. inlet 25 hp exhauster motor 81 filters 6” dia. x 68” lg 668 sq/ft of filter 6,000 cfm estimated capacity Serial Number: 1020

Nailmate Nailer. 48x50 Pallets. Located in WI. #C924

NANXING NCG 2512L CNC FLAT TABLE MACHINE (W/LOADING/UNLOADING) + Auto Label Printing Application: -- Specifications:Bridge Gantry with 4' x 8' "Matrix" grid Phenolic surface table for "Nested Base Manufacturing", Automatic Loading and Unloading System with Vacuum cups & Sweeping Arm.Loading flow from Left to Right configuration. -- Work area:"Matrix" grid Phenolic surface flat table designed for "Nested Base Manufacturing". -- Working cap.:"X" Axis is 98.4" (2,500 mm), "Y" axis is 48" (1,220 mm) & "Z" axis is 9.8" (155 mm);Max. programmable speed: "X" & "Y" Axis 98 FPM (30 MPM), "Z" axis 65 FPM (20 MPM). -- Boring Unit:(10) Independent vertical boring spindles with (5) spindles in "X" axis & (5) spindles in "Y" axis, for 10 mm tools max dia. and 35 mm max. bore and 32 mm OC; -- Machining:(1) 12 HP (9 kW) Vertically mounted HSD electro-spindle router with HSK-63F adapters, Inverter controlled variable spindle speed up to 24,000 RPM, with max. torque from 12,000 RPM.(1) 8-Position Automatic tool changer with "revolver type" ATC tool plate. -- Operator & Machine Control: "SYNTEC" Controller, English language cutting/optimizing software, MS-Windows "10" based technology,32-bit Pentium - 400 MHz processor (w/operating system for Windows 7), 4 GB hard drive,15" Dell, international keyboard, soft-touch keypad & industrial mouse and USB port. -- Complete with:(2) 7.5 HP (5.5 kW) air-cooled vacuum pumps that provide 5,650 cu.ft./hr. (160 m3/hr.) of suction power: Safety & Emergency stops: Automatic lubrication system for guides & ball screw: Auto-Transformer for voltages between 200-600 V: -- Options Include: (1) NC Controlled infeed Scissor Lift table with vacuum loading Automatic Label Printing Station with Automatic Material Alignment (1) Rake system (1) NC controlled & powered flat belt outfeed table with vacuum sweeping system Tool Touch-Off Probe with automatic program update according to the tool length. Actual Model is NANXING NCG 2512L

NASH - 50-72: Spindle Sander -- (10) Spindles; 72" chucking. -- Cap., 3/8" - 6" dia. range; 2-1/4" dia. main arbor with long keys for driving head & tailstock wheels. -- Variable spindle speeds: 700 - 3,000 RPM; 7.5 HP spindle motor. -- 2 HP Feed & oscillation sanding rack motor; 60" max. sanding cap. with: (5) Sanding racks, self-adjusting and oscillating. -- Variable oscillating speed: (60 - 120) Strokes/Min; oscillating stroke adjustable up to 2" in length.Equipped with: -- Overhead mounted dust hood., -- Push-button control panel; production rate of (10 - 30) pieces/Min.

NASH 50-72 Spindle Sander(10) Spindles, 72" chucking cap., 3/8" - 6" dia. range;Specifications: -- 2-1/4" Dia. main arbor with long keys for driving head & tailstock wheels. -- Variable spindle speeds from 700 - 3,000 RPM, 7.5 HP spindle motor, 2 HP feed & oscillation rack motor, variable oscillating speed (60 - 120) strokes/Min, oscillating stroke adjustable up to 2" in length. -- (5) 72" Sanding racks, self-adjusting & oscillating. -- Equipped with: Overhead mounted dust hood, push-button control panel; production rate of (10 - 30) pieces/Min. -- Includes: brushes and sandpaper

NEDERMAN - NFSZ 3000/1N. Modular Filter, fully-featured with: NRSZ-10 - Rotary Air Lock waste discharge; Spark Detection; Variable Speed motor drive7,320 CFM; approx. 8-to-1 air-to-cloth ratio; positive pressure; expandable Heavy-Duty Baghouse Dust Collector System. - Designed for small to medium-sized air flows with: Large material concentration (dust loading).Specifications -- Total 915 sq./ft. filter area; (25) SUPERBAG 2000 XT15 filter bags. -- Includes: (1) Filter module sections (expandable) with: Combined explosion & access door in each section; each with 1.5 HP regenerative fans for cleaning of filter media. -- Unit is ATEX rated; Hopper for collected material to Rotary Air Lock at one end and discharging into a waste bin (not included). -- Equipped with: (1) Ground-mounted 40 HP TEFC Belt driven motor with Variable Frequency Drive and NEDERMAN MH type Blower package; about 18" inlet.Capable of approx.: 7,500 CFM w/drive guards; motor & fan are a common steel base/frame with current roof-mounted installation. - Main pipe to fan inlet is approx. 18", as is the fan outlet pipe. -- Features & Includes: Spark Detection system controlling an Abort Gate on return line and mounted on separate steel support; 22" dia. back pressure (flow) flap valve located between fan discharge & baghouse inlet. -- Complete with: Access ladder/platform; drain with plug: quick open access doors; inlet flange; electrical disconnect; separate control panel with motor starter for main blowers. -- Includes: Primary outside pipe; approx. 10' high support steel structure; platform & ladder mounted on top of structure.Baghouse dimensions: 48" x 94-1/2" Square (1,200 x 2,400 mm) for both modules; height of Baghouse shell will be provided.Actual model: NFSZ 3000 - 1N

NEDERMAN - S-1000: BAG FILTER Dust CollectorThe NEDERMAN S-Series Baghouse Dust Collector is: Quick to install and Easy to operate. It is the ideal solution for the small shop or single work-cell operation. -- Includes: 10 HP Motor; CFM range from 4,000 CFM @ 8" WG to 5,000 CFM @ 7" WG. -- Equipped with: 10 HP - 1,750 RPM TEFC Motor; (24) Beane material filter bags; (3) plastic waste collection bags; (3) clamps for easy removal of waste bags; magnetic starter. -- Features: 360 Sq/ft. of filter medial; easy installation, typically (1) hour; quiet operation. -- Inlet opening 15". (2) Units available!

NEDERMAN S-1000 BAG FILTER Dust Collector. The NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. It's the ideal solution for a smaller shop or single work-cell operation.Specifications: -- With a 10 HP motor and a 5,000 CFM @ 7" WG and 360 Sq/ft of filter media. -- 10 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: Easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 16". Available in 208/230/460 V, 60 Cy, 3 Ph. Must specify Voltage at time of orderAvailable option:- Aluminum Impeller: - 45 Gallon Drum Discharge - Single Drum (3 REQUIRED)- 230 Gallon Dump Bin: Available spare parts:- Filter Bag (24 Filters)- Plastic Bags (Roll of 90 - 8 mil thickness) - 500mm Clamp (bags, barrels, and bin)

NEDERMAN S-1000 BAG FILTER Dust Collector w/ Auto Bag ShakerThe NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. It's the ideal solution for a smaller shop or single work-cell operation.Specifications: -- With a 10 HP motor and a 5,000 CFM @ 7" WG and 360 Sq/ft of filter media. -- 10 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: Easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 16". Includes: -- Auto Bag ShakerAvailable in 208/230/460 V, 60 Cy, 3 Ph. Must specify Voltage at time of orderAvailable option:- Aluminum Impeller: - 45 Gallon Drum Discharge - Single Drum (3 REQUIRED)- 230 Gallon Dump Bin: Available spare parts:- Filter Bag (24 Filters)- Plastic Bags (Roll of 90 - 8 mil thickness) - 500mm Clamp (bags, barrels, and bin)

NEDERMAN S-500 BAG HOUSE DUST COLLECTOR. -- Open Bag house designed for interior application; 5 HP TEFC material fan motor, 1,750 RPM; free standing 2,000 CFM open frame bag house, 162 sq. ft. of filter area via (16) beane material filter bags; 7.5" W.G. static pressure. -- Bottom discharge into (2) plastic waste collection bag. -- Includes: Side-mounted blower assembly with support legs; (2) quick disconnect clamps for the plastic bags. Starter motor with push buttons. Option:42 Gallons Drum Discharge, Single Drum (2 REQUIRED FOR COMPLETE S-500)

NEDERMAN S-750 BAG FILTER Dust Collector. The NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. With a 7.5 HP motor and a 4,500 CFM @ 6" WG it's the ideal solution for the small shop or single work-cell operation. -- Specifications: 7.5 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: 243 Sq/ft of filter media, easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 11". -- Available in 208/230 or 480 V, 60 Cy, 3 Ph. Must specify voltage at the time of orderAvailable options:42 Gallons Drum Discharge - Single Drum (3 REQUIRED)230 Gallon Dump Bin

NEDERMAN S-750 BAG FILTER Dust Collector w/ Auto Bag ShakerThe NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. With a 7.5 HP motor and a 4,500 CFM @ 6" WG it's the ideal solution for the small shop or single work-cell operation. -- Specifications: 7.5 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: 243 Sq/ft of filter media, easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 11". -- Available in 208/230 or 480 V, 60 Cy, 3 Ph. Must specify voltage at the time of orderIncludes: -- Auto Bag ShakerAvailable options:42 Gallons Drum Discharge - Single Drum (3 REQUIRED)230 Gallon Dump BinAvailable spare parts:- Filter Bag (24 Filters)- Plastic Bags (Roll of 90 - 8 mil thickness) - 500mm Clamp (bags, barrels, and bin)

N&A Air pop up trim saw

NeuStar HURRICANE BOXES 24’x102”, 8’ walls, AR450 floor and walls, height extensions available - cab shield setup for rear mount loader - setup for front mount loader or trailer mounted