Equipment For Sale

2010 Freightliner M2 Crane Truck National 400B Crane New Cable 49648 Miles

2004 Freigtliner Columbia Day Cab New transmission New tires Heat/AC work Road ready Mercedes engine 10 speed 727,911 miles

New take out air suspension seats with base from 2022 Freightliner

2006 Freightliner Classic, Nice! 46,000 full locking rears, 12,000 steer, air ride, sliding 5th wheel, 24.5 rubber @ 90%, extra light, dual wetline, 18 speed, integrated sleeper, new leather seats. $38,000 OBO 315-408-8249

2006 Coronada, 46,000 rears w/diff lock, 14,000 steer, Air Ride, heavy frame, 550HP series 60 Detroit, 14L, deleted, 18 speed, dual wetline, setup to run log loader. $38,000 OBO 315-408-8249

2011 Freightliner M2 Chip Truck, 116,000 miles, 6 Speed Manual Transmission. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Freightliner M2 106 12ft flatbed Bed is almost new Bed has gooseneck ball Pintle hitch and receiver hitch Airlines have been routed to the back Has backup camera that shows gooseneck ball and rear camera for backing/hooking up trailer Cat C7 engine Allison auto transmission 241k miles No AC from factory

Frick Sawmill 4 Head Block Mounted on a drop deck trailer. Everything folds up for transport. Includes: Cummins motor

Frick Gang Edger (no motor) 636 S/N 160 with Gang of Blades.

Frick Saw Husk with Top Saw

Frick 00 Sawmill 4 head block 471 Detroit (missing radiator) 4 saws Steel track New wheels and bearings Needs some work

Parts machine log turner hydraulic power pack other parts

Frick 4 Head Block Carriage With Track & Carriage Drum Drive, Husk, Cab & Controls

Frick Timber-Tiger 10" Double Arbor Gang Rip Saw 36" opening includes 15' shifting infeed with 10" ladder back chain. (2) 300hp 1775 RPM electric motors

Frick 3 HB carriage, track, husk, cab & controls

Frick 38" 4 Head Block,Track, Paneagraph,Husk frame cab controls, Top Saw 36" and 56" Blade on Husk, Carriage & Track with T-Berry carriage Drive.

1980's Frick O1C Circular sawmill -2 saw 50 H,P Vertical edger -150 H.P electric motor -Deck is a 4 strand 25' Melot and Turner -Carriage has 4 Head Blocks with air dogs and tapers. -Mill is disassembled and ready to move now. Will have machinery on site to load mill up.

The Complete Frickco Circle Mill is a reliable circular sawmill, ideal for various lumber processing needs. It features a Mellott log deck with a stop and unloader, equipped with a #5 turner, and a track and hydraulic drive for efficient log handling. This mill comes with a 4-dog carriage featuring air dogs and drive, and an electric setworks to facilitate precise cutting operations. The husk on this mill is equipped with a 56" blade, accompanied by a top saw and slab belt, ensuring capability to handle large logs effectively. The package includes essential accessories like pulleys and belts, and it comes with a Frick 2-saw edger, complete with a roll case for streamlined edging tasks. Powering the system is a robust 150 HP motor, complete with a starter, providing the necessary torque and energy efficiency for demanding operations. This comprehensive setup offers a ready-to-go solution for those in need of a well-established and effective milling operation.

FRIULMAC - Dual Feed: Double End Cut-Off SawFor squaring the workpieces and for transportation to a Planer or Moulder with a straightening table. -- 59" Max. (1,500 mm) opening from Saw to Saw; motorized opening with LED readout on the control panel; left hand fixed with left-hand fence line. -- Hopper Magazine, material capacity: Min. length 7.87" (200 mm); max. 59" (1,500 mm); width 1-1/8" (30 mm) to 4-3/8" (110 mm); thickness 0.59" (15 mm) min.; up to 2-3/8" (60 mm) max.; hopper stack height: 23-1/2" (600 mm).Each side equipped with: -- (2) Trim saw motors: 5.36 HP Each; saw blade dia. 9.84" (250 mm). -- Hydraulic feed drive unit with: 3 HP (2.2 kW) Motor. -- Trimming & throughput capacity: Up to (40) pieces per minute..

FRIULMAC - Dual Feed: Double End Cutoff SawFor squaring workpieces and for transportation to a Planer or Moulder with a straightening table. -- 59" Max. (1,500 mm) opening from Saw to Saw: Motorized opening with LED readout on the control panel; left-hand fixed with left-hand fence line. -- Hopper magazine - material capacity: Min. length: 7.87" (200 mm), max. 59" (1,500 mm); width 1-1/8" (30 mm) to 4-3/8" (110 mm); thickness 0.59" (15 mm) min., up to 2-3/8" (60 mm) max.; hopper stack height: 23-1/2" (600 mm).Each side equipped with: -- (2) Trim saw motors: 5.36 HP each; saw blade dia.: 9.84" (250 mm). -- Hydraulic feed drive unit with: 3 HP (2.2 kW) motor. -- Trimming & throughput capacity: Up to (40) pieces per minute..