Equipment For Sale

2022 Ponsse Bear Processor -2300+ hrs(working) -H8 head -Tires 95% -Tracks 95% -Tight and dry

2016 Ponsse Ergo, 12,157 hrs., $259,900

2003 Ponsse Caribou Forwarder, Equipped with 18,000 Original Hours, Mercedes Engine, 12 Ton Double Bunk Forwarder, Enclosed Cab with Heat and Air, One Set of Tracks. 1 New set of chains, Replaced Hydraulic Pump last year, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Ponsse Ergo, H73E Harvester with 22,000 hours, Dry machine, Computer does not work. Operating Weight 35,274 lbs Height - Top of Cab 12.4 ft Overall Width 9.4 ft Shipping Length - non tilt 25.2 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Ponnse Ergo Processor, 13,000 Hours on the Engine Mercedes 270 HP Engine, C-4 Crane and H-7 Processor Head, 1000 Hours on Remaned Engine, Outer Boom Chains Replaced New Crane Bearing, Enclosed Cab with Heat and AC, Tracks available Ready for the Woods. Operating Weight 35274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Portage & Main Outdoor Wood Stove W/ Wood Chip Feeder

Porter Planer Model 700 S/N 5916, Straight Knifes 10HP Motor

Porter Cable 5HP Single Phase Compressor.

The professional horizontal splitter with longitudinal tractor chassis for mobile applications! Complete Posch Splitter, Processor and Packaging lines sold exclusively through Northeast Implement. Better cutting, splitting machines that are fast and safer, call 607-589-6160 to get yours today!

2000 Povlsen Wide-bandsaw mill. In good working condition 75hp Isuzu Diesel engine and has approximately 1500hrs on it. Mill can saw logs approximately 36"D x 25' L Comes with an Armstrong #2 bandsaw sharpener and approximately 20 new bandsaw blades.

Powerfist 1HP Dust Collector

TABLE SAW TOP MEASURES 44" WIDE X 76 ½" LONG TABLE HEIGHT FROM FLOOR 34% " COMES WITH 5 - 12" DADO BLADES 1 HORSE POWER POWERMATIC MATERIAL FEEDER 5 HORSE POWER SAW ARBOR MOTOR 440 VOLT 3 PHASE

POWERMATIC - WB-25, ...Wide Belt Sander1-Head; 25" width capacity; 1/8" to 6" thickness capacity.Combination sanding head with: 4" Dia. rubber-covered contact roll; 2" wide polishing platen; micro-adjust platen; steel abrasive belt tension roll; steel idler roll: 25" x 75" Abrasive belt capacity.Equipped with: -- 15 HP 3-Phase main motor; 1 HP variable feed motor, 15 - 49 FPM. -- 1/4 HP Table raising & lowering motor with: Auto adjust thickness assist; 1/8" to 6" opening with (4) screw jacks. -- Double infeed & outfeed rubber covered holddown rolls. -- Complete with: -- Digital readout; air eye belt sensing; limit switch overtravel protection; magnetic starter; overload protection; load meter; emergency brake.Includes: Owner's manual & parts list.

20" Dia. dynamically balanced aluminum disc, 3 HP - 1,740 RPM direct drive motor; 15" x 27-1/4" table w/miter gage slot, tilts 30° upward & lowers 45° downward, 90° positive table stop; rack mechanism for raising & lowering table by hand crank, heavy bolt-down steel base. Complete with reversing switch and miter gauge. Also available in Single-phase in 2 HP motor.

POWERMATIC - TS-80, ...Single Spindle ShaperAccepts: 3/4" - 1" - 1-1/4" Dia. interchangeable spindles; 5-1/2 HP motor; 3,625 - 5,000 - 7,250 - 10,000 Spindle speeds. -- 4" Cap. under nut when using 1-1/4" spindle; 6-19/64" spindle stroke; approx.: 39-1/2" x 31-1/2" Extra thick cast iron main table. -- Complete with: Adjustable split fence; spring hold-downs; removable table inserts; dust collection shroud; reversing switch; spindle brake; cutter-head guard. -- Includes: Infeed & outfeed tables shown in picture and a box of spindles. - NOTE: Needs some work on bearings.

POWERMATIC 100 Single Sided PlanerSpecifications: -- 12" Cap. with 1/16" to 5" thickness opening -- 5 HP motor - 5,300 RPM -- 3-knife cutterhead with high speed steel knives -- 3-1/8" dia. head; 18 FPM fixed feed speed. -- Solid infeed rolls; 12" x 24" precision ground cast iron table. -- 1/4" max. depth of cut -- 7-1/2" min. stock length (unbutted). -- Complete with: Magnetic controls, cutterhead guard with dust chute on enclosed steel stand. -- Belt driven head

POWERMATIC PF-41 4-Roll Power FeederFeatures: -- Cast Iron construction. -- Continuous duty motors transfer power from the gearbox to the feed rollers. -- Moveable universal joints and locking mechanisms lock the feeder in horizontal, vertical, or angle feed positions. -- Roller chain and sprocket design provide positive feeding for all types of materials. -- Rollers can be changed out easily and quickly; Smart roller system allows for the tires to be replaces without replacing the assembly. -- Solid cast iron construction of body pieces and base. -- The support column is fully adjustable for horizontal, vertical or angled feeder position. -- Universal joints provide stability for vibration-free feedingSpecifications: -- Swing 360°. -- Motor Power 1 HP. -- (4) Feed speed rates at 13 / 36 / 43 / 108. -- Max. Height of Rollers Parallel to Tabletop 8-1/2".

Powermatic DDS-225 Drum SanderSpecifications: -- 5 HP Main motor, durometer rubber-coated steel drums, independently adjustable rear drum for fine tuning. The Cast Iron table incorporates (4) jack screws with chain drive timing to keep it level. -- Features: Heavy-duty poly conveyor belt, 0.25 HP feed motor coupled to 2-speed forward/reverse gearbox for 8 or 10 SFPM, and dual dust collection ports with directional baffles.

POWERMATIC - RB-37, ...Single Head Wide Belt Sander1-Head, 36" width cap., combination sanding head. -- Includes: 4" Dia. contact roll & 2" wide polishing platen, micro-adjust platen; 15 HP main motor. -- Abrasive belt size: 37" x 60"; with air tensioning, air jet abrasive belt tracking. -- 1 HP Feed drive; variable feed speed of 15 - 30 FPM conveyor speed. -- 0" - 5-1/4" Opening with: (4) Screw jacks; double infeed & outfeed rubber-covered hold-down rolls. -- Complete with: Magnetic starter; overload protection; load meter; emergency brake.

POWERMATIC - 075: Dust Collector3 HP Freestanding Collector; 1,900 CMF; (2) 20" dia. x 48" upper cloth filter bags; (2) 20" dia. x 34" lower cloth collector bags with: 10 Cu/feet cap. -- Unit mounted on common base; comes with: (1) 8", (1) 6", and (3) 4" dia. outlets. -- Equipped with: Push-button starter switch; base mounted on: (4) Swivel casters: 96" x 26" x 60" height overall.