SCM - OLIMPIC K 201 HFA, ...Automatic Compact Edgebander with: 3 mm Max. coiled edgebanding thickness & High Frequency motorsSpecifications: -- Edgebanding thickness cap. (for both coil & strip): 0.4 - 3 mm (0.02" - 0.19"). -- Min. panel length for coiled edges (min. width 200 mm) 140 mm (5.51"). -- Min. panel width for coiled edges: 65 mm (2.56"). -- Panel thickness: 8 - 40 mm (0.31" - 1.57"). -- Feed speed:9 MPM (29 FPM).Equipped with: -- Automatic adjustment of all units when panel thickness is changed. -- 20" Dia. coil table. -- Automatic coil feed magazine; manual strip feed. -- Teflon-coated glue pot. -- 1.2 mm (0.05") Cap. guillotine. -- Eye-level control with: GEFRAN "1000" LED Temperature controller. -- Adjustable feet.Workstations: -- Single-motor end trimming unit with: (1) 0.19 kW (1/4 HP) - 12,000 RPM High-frequency motor & copying device. -- Top & bottom flush trimming unit with: (2) 0.35 kW (1/2 HP) - 12,000 RPM high-frequency motors, and front & vertical copying devices.

SCMI - K201 HFE: Single Sided Edgebander1/8" Max. edge cap.; 1-1/2" max. panel thickness; semiautomatic strip & coil feed magazine (manual single strip feed); Teflon coated glue pot w/fast 8-Minute heat up time; 1.2 mm cap. guillotine. -- Workstations: Single motor front & rear end trim; 0.8 HP - 10,000 RPM motor; top & bottom flush trims, 0.8 HP - 27,000 RPM ea. motor; straight or 12° bevel cutters. -- Top & Bottom buffing unit, 0.25 HP - 2,800 RPM motors; 25 FPM fixed feed speed with 0.8 HP drive. -- Complete with: Sound enclosure, frequency converter, and used tooling.

SCM - OLIMPIC K 360: Compact EdgebanderSpecifications -- Edge capacity: 0.4 to 6 mm (0.016to 1/4") For strip feeding. -- Panel capacity: Min. width 65 mm & 140 mm min. length; 2-3/8" & 5-1/2". Panel thickness min./max.: 8 - 60 mm (3/8" - 2-1/2").Equipped with: -- Automatic Strip & Coil Feed Magazine: For straight edges & 3 mm guillotine for coils. -- Gluing Station for EVA (Hot Melt) with: TEFLON Coated glue tank & quick disconnect to change glue tanks fast if needed. Heat-up time approx.: 10 Min. -- Pressure Section: Manual digital positioning; (3) pressure rollers, 1st larger & TEFLON coated & powered. Workstations -- End Trimming Station: Front & rear: 2 x 0.25 HP - 12,000 RPM Motors mounted on: THK Guides; swivels 0° - 15°; rapid set up between straight and angled cutting with: An automatic swivel cylinder. -- Trimming Unit Flush/Bevel/Radius: Top/Bottom remote (via control panel); pneumatic positioning for: (3) Settings: Flush/bevel/radius trimming; (2) x 0.7 HP - 12.000 RPM motors with: Precision digital indicators for quick setup. -- Buffing Unit: Top/bottom, (2) x 1/4 HP - 2,800 RPM motors; tilting up to 12°. Controls -- "ORION 1 Plus" Controller; fixed at infeed of machine with: soft keys; graphics; 4" LCD display panel. It handles most machine setup functions and workstations. Complete with & Features -- Feed speed: 36 FPM Fixed; (1) x 2.0 HP Feed drive motor; 200 Hz frequency inverter for all trimming units. -- Manual adjustable holddown pressure beam; full sound enclosure cover & outboard panel support.Condition: ATFS

SCM - OLIMPIC K360 ERT HP SERVO: Compact Edgebander (w/Premill & Corner Rounding)Specifications -- Edge Capacity: 0.4 - 6 mm (0.016 to 1/4") For strip feeding. -- Panel Capacity: Min. width 65 mm & 140 mm min. length (2-3/8" & 5-1/2"); panel thickness: Min./max. 8 - 60 mm (3/8" - 2-1/2").Equipped with: -- Adjustable Infeed Fence. Manually preset with: Digital indicator; pneumatic in/out positioning. -- Premilling Station RT-VP: Spindles (2) x 2.0 HP - 19,000 RPM; (1) with PLC controlled jump action & diamond cutterheads. -- Automatic Strip & Coil Feed Magazine: For straight edges & 3 mm guillotine for coils. -- Gluing Station for EVA (Hot Melt) with: Teflon coated glue tank & quick disconnect to change glue tanks fast if needed; heat up time: Approx. (10) Min. -- Pressure Section: Manual digital positioning; (3) pressure rollers: First larger; Teflon coated & powered. Workstations -- End Trimming Station. Front & rear: (2) x 1/4 HP - 12,000 RPM motors; mounted on THK guides; swivels 0° - 15°; rapid setup between straight & angled cutting with: Automatic swivel cylinder. -- Trimming Unit. Flush/Bevel/Radius: Top/Bottom remote (via control panel) pneumatic positioning for (3) settings; Flush/bevel/radius trimming: (2) x 0.7 HP - 12.000 RPM motors with: Precision digital indicators for quick setup. -- Corner Rounding Unit. "Round 2M" with: (2) 0.8 HP Independent motors that slide on THK guides. -- Profile Scraping Unit. "RAS/V": Top/Bottom, manual preset up with digital indicators; large dia. copy wheels for max. accuracy & pneumatic in/out positioning. -- Buffing Unit. Top/bottom: (2) x 1/4 HP - 2,800 RPM motors; tilting up to 12°. Operator Interface -- ORION "1 Plus" Controller. Fixed at infeed of machine with: "Touch Screen" control; softkeys; graphics; LCD display panel; handles most machine setup functions & workstations. Complete with & Features -- Servo-Controlled Electronic Axes. The HP Servo model allows: Electronic positioning of key stations through the touchscreen. This reduces setup time dramatically when switching between: 1 mm PVC; 3 mm PVC; Wood edging; different panel thicknesses. For a custom cabinet shop running mixed jobs daily, the Servo package can easily: Save 15 – 30 minutes of setup time per day compared with manually adjusted machines. -- Feed speed: 36 FPM Fixed; (1) x 2.0 HP feed drive motor; 200 Hz frequency inverter for all trimming units. -- Manual adjustable holddown pressure beam; full sound enclosure cover; outboard panel support. -- Actual Model: SCM OLIMPIC K360 ERT HP SERVO

SCM - OLIMPIC K 560 R HP SERVO: Edgebander (w/Premill) -- Specifications Edge Capacity: 0.4 to 6 mm (0.016 to 1/4") for strip feeding. -- Panel CapacityMin. panel width: 60 mm (2.375"); min. panel length: 140 mm (5-1/2").Min./max. panel thickness: 8 - 54 mm (0.375" - 2.125"); min. distance between panels: 600 mm (24").Equipped with: -- Premilling Station. (2) 2.0 HP (1.5 kW) Motors; Servo controlled; to rectify/clean panels already sized. -- Adjustable Infeed Fence. Manually preset with: Digital indicator; pneumatic in/out positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges; 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with quick-change/disconnect TEFLON glue pot for fast glue tanks change if needed. Heat up time approx. 10 Min. -- Pressure Section. Manual digital positioning: TEFLON Coated pneumatic driven roller; (2) spring-loaded idle rollers.Workstations -- End Trimming Station. Front & rear: (2) 1/2 HP - 12,000 RPM Motors mounted on THK guides; swivels 0° - 15° for straight & angle cutting. -- Top & Bottom Trimming Unit. (2) 0.7 HP - 12.000 RPM motors; capable of tilting & pneumatic positioning for (3) settings: Flush/bevel/radius trimming for quick setup. -- Top & Bottom Profile Scraping Unit. Digital indicators; large dia. copy wheels for max. accuracy; pneumatic in/out positioning. -- Glue Scraping Unit. Eliminates any excess glue. -- Buffing Unit. Top/Bottom; (2) 1/4 HP - 2,800 RPM motors; tilting up to 12°.Operator & Machine Control -- "STARTOUCH" Controller with: 21-1/2" Touchscreen display; capable of storing (100) programs. Machine automation by: PLC Function; encoder positioned in the panel feed track pinion.Diagnostics for a quick solution to errors; process statistics data: i.e., Number of pieces/edges and track feeding.Features & Complete with: -- 2-Speed feed speed of: 40 & 60 FPM (12 & 18 MPM); (1) 2-1/2 HP feed drive motor. -- 200 Hz Frequency inverter for all trimming units. -- SERVO Controlled; adjustable top holddown pressure beam. -- Auto. panel spacer to eliminate premature loading. -- Antiadhesive spray. -- Full sound enclosure cover; outboard panel support. -- This machine is: FULL SERVO Controlled. -- Actual Model: SCM - OLIMPIC K 560 R HP

SCM - OLIMPIC K 560 R HP SERVO: Edgebander w/Premill & Corner Rounding -- Specifications Edge Capacity: 0.4 to 6 mm (0.016 to 1/4") for strip feeding. -- Panel CapacityMin. panel width: 60 mm (2.375"); min. panel length: 140 mm (5-1/2").Min./max. panel thickness: 8 - 54 mm (0.375" - 2.125"); min. distance between panels: 600 mm (24").Equipped with: -- Premilling Station. (2) 2.0 HP (1.5 kW) motors; Servo controlled; to rectify/clean panels already sized. -- Adjustable Infeed Fence: Manually preset with digital indicator; pneumatic in/out positioning. -- Automatic Strip & Coil Feed Magazine. For straight edges; 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with quick-change/disconnect TEFLON glue pot for fast glue tanks change if needed. - Heat up time approx. (10) Min. -- Pressure Section. Manual digital positioning: TEFLON Coated pneumatic driven roller; (2) spring-loaded idle rollers.Workstations -- End Trimming Station. Front & rear: (2) 1/2 HP - 12,000 RPM Motors mounted on THK guides; swivels 0° - 15° for straight & angle cutting. -- Top & Bottom Trimming Unit. (2) 0.7 HP - 12.000 RPM motors; capable of tilting & pneumatic positioning for (3) settings: flush/bevel/radius trimming for quick setup. -- Corner Rounding Unit. With: (2) 0.8 HP Independent motors that slide on THK guides. -- Top & Bottom Profile Scraping Unit. Digital indicators; large dia. copy wheels for max. accuracy; pneumatic in/out positioning. -- Glue Scraping Unit. Eliminates any excess glue. -- Buffing Unit. Top/Bottom; (2) 1/4 HP - 2,800 RPM motors; tilting up to 12°.Operator Interface -- "STARTOUCH" Controller with: Touchscreen display; capable of storing (100) programs. Machine automation by: PLC Function; encoder positioned in the panel feed track pinion.Diagnostics for a quick solution to errors; process statistics data: i.e., Number of pieces/edges and track feeding.Features & Complete with: -- 2-Speed feed speed: 40 & 60 FPM (12 & 18 MPM); (1) 2-1/2 HP feed drive motor. -- 200 Hz Frequency inverter for all trimming units. -- Servo controlled, adjustable top hold-down pressure beam. -- Automatic panel spacer to eliminate premature loading. -- Antiadhesive spray. -- Full sound enclosure cover & outboard panel support. -- Actual Model: SCM - OLIMPIC K 560 R HP SERVO.

SCM Olimpic K560 Automatic Edgebander: --Heavy-duty industrial edgebander designed for professional cabinet, millwork, door, panel-processing, and production applications. --Equipped with: --Automatic edge-feeding and gluing system for consistent edge application. --Automatic panel-feed system designed for continuous productions. --Work Stations: --Automatic end-trimming station. --Top and bottom buffing station for clean finished edge. --Complete with: --Operator control system for machine setup, adjustment and production control. --÷Machine specifications: --Manufacturer: SCM Group --Model: Olimpic K560 ÷Year: 2014 ÷Serial Number: AH/117660÷Electrical: 220V/3-Phase/60Hz÷Rated Current: 51 amps÷Machine Weight: 1,386kg (approximately 3,056lbs)÷Country of Manufacture: Italy --This SCM Olimpic K560 is a substantial production machine well suited for processing cabinet components, panels, doors and architectural millwork.

SCM OLIMPIC K 360 COMPACT EDGEBANDER WITH PRE-MILLING Specifications: -- Edge Capacity: 0.4 - 6 mm (0.016" - 1/4") for strip feeding. -- Panel Capacity: Min. width: 65 mm; min. length: 140 mm min. length (2-3/8" and 5-1/2"). - Panel thickness: Min./max.: 8 - 60 mm (3/8" - 2-1/2").Equipped with: -- 2-Head Pre-milling station model (2.5 HP - 19,000 RPM motors ea.). -- Adjustable infeed fence: Manually preset with digital indicator; pneumatic in/out positioning. -- Premilling Station RT-VP: Spindles (2) x 2.0 HP 19,000 RPM; (1) PLC controlled jump action and diamond cutterheads. -- Automatic strip & coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat up time approx.: 10 Min. -- Pressure Section: Manual digital positioning; (3) pressure rollers; 1st larger Teflon coated and powered. Workstations: -- End Trimming Station - Front & rear: (2) x 1/4 HP - 12,000 RPM motors mounted on THK guides; swivels 0° - 15°; rapid set up between straight & angled cutting with the automatic swivel cylinder. -- Trimming Unit Flush/Bevel/Radius: Top/Bottom remote (via control panel) pneumatic positioning for (3) settings: Flush. bevel, radius trimming; (2) x 0.7 HP - 12.000 RPM motors: Precision digital indicators for quick set up. -- Profile Scraping Unit "RAS/V": Top/Bottom; manual preset up with digital indicators; large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Buffing Unit: Top/Bottom; (2) x 1/4 HP - 2,800 RPM motors; tilting up to 12°. Complete with & Features: -- Feed speed: 36 FPM fixed; (1) x 2.0 HP Feed drive motor; 200 Hz frequency inverter for all trimming units. -- Manual adjustable holddown pressure beam; full sound enclosure cover; outboard panel support.Condition: ATFS

SCM - OLIMPIC K230ERT EVO: Edgebander (w/Premilling & Corner Rounding) -- Specifications0.4mm to 3mm Edge thickness; panel thickness 8 mm to 50 mm (0.3" to 1.96"); minimum part width 60mm (2.36"); minimum part length 160 mm (6.30").Minimum distance between panels: 559 mm (22";); 29-1/2 FPM (98 MPM) Fixed feed speed; 1.0 HP (0.75 kW) feed drive.Premilling Station RT-VP(2) 2.0 HP (1.5 kW) Motors to rectify/clean panels already sized. -- Adjustable infeed fence: Manually preset with digital indicator, pneumatic in/out positioning.Equipped with: 1.5 kG TEFLON Coated glue pot; glue roller application system complete with: Automatic recycling device for unused glue.Digital thermostat adjustment for temperature control; pneumatic guillotine; heating time approx. (8 - 10) Min.3-Roll pressure unit with: Pneumatic controls for all pressure rollers. -- Automatic strip & coil feed magazine.Workstations2-Motor front & rear End Trimming (1/2 HP - 12,000 RPM ea. motor.); tilts 0° - 15°; end trimmers mounted on THK guide. -- Top & bottom flush & bevel trims with: Quick release mount and plug-in motors for quick tooling changes.0.5 HP - 12.000 RPM Motor ea.; bevels 0° - 15° with: Precision digital indicators for quick setup. -- Corner Rounding Unit from .5 to 3mm. -- Top & bottom scraping unit with: Manual positioning. -- RC-V Top & bottom Glue Scraping Unit -- Top & bottom buffing unit (1/4 HP - 3,000 RPM motors); tilts up to 12°. Operator & Machine Control"ORION 1 Plus" Controller: Located at the infeed of the machine; capable of operating all the work units via soft touch buttons.It pneumatically tilts the end trim unit from the Control Panel; eliminates the use of micro switches, as well as controls the temperature of the glue.Control is tilted slightly upward for a more ergonomically friendly position for the Operator. -- Actual Model is: SCM OLIMPIC K230ERT EVO

SCM SANDYA - 40 M3 135, ...3-Head Wide Belt Sander 52" Width cap. Drum, Drum, Combination HeadHead Configuration:1st Head: Steel Contact 22 kW Pneumatic blowdown and alignment.2nd Head : Rubber Contact 18.5 kW Pneumatic blowdown and alignment.3rd Head: Combination Platen 15 kW Pneumatic blowdown and alignment.Note:The SCM sander does not have a brush. After the 3rd head, it has this pneumatic blow-off bar with multiple blow-offs running the length of the sanders width. Sander can be seen under power if needed.Specifications: -- 53" x 103" Abrasive belts with electronic tracking. -- All heads with abrasive belt grit compensation. -- Conveyor belt feed with dual feed speed, 5 HP motor. -- Automatic part thickness adjustment. -- Motorized thickness opening via (4) precision conveyor bed jacks with LED readout. --0" - 7-7/8" opening. -- Equipped with & Features -- Outfeed rubber covered holddown rolls or shoes on all heads. -- Motor load meters. --Infeed and outfeed conveyor extensions. -- WYE-DELTA soft start.Note: The SANDYA model "40" is more or less the same as the SANDYA "30" but more Heavy Duty.

SCM SANDYA 15S (3) Head Wide Belt Sander42" Width cap, Drum, Drum, Combination HeadHead Configuration:1st Head: Steel contact roll, 7" dia., 35 HP motor;2nd Head: Rubber-covered contact roll, 24 HP motor3rd head: Combination head, rubber-covered contact roll (45 Shore) and 3" wide finishing platen, 17.4 HP motor.Specifications: -- 43" x 103" Abrasive belts -- Electronic tracking & pneumatic belt tensioning, abrasive belt grit compensation. -- Conveyor belt feed with dual feed speed, 4 HP motor -- Automatic part thickness adjustment -- Motorized thickness opening via (4) precision conveyor bed jacksEquipped With & Features: -- LED readout, 0" - 6-1/4" opening. -- Infeed & outfeed spring loaded rubber covered hold-down rollers -- Motor load meters -- Infeed and outfeed roller conveyor extensions.

SCM Sandy 10 -RCS-110 Wide Belt Sander (2) Heads43" Width cap. Drum, Combination HeadHead Configuration:1st. Head: 7" diameter corrugated metal roller for calibration 35 HP ( Drives both Heads )2nd Head: Combination head with 7" dia. contact roller (spiral grooved rubber covered); air/jump finishing platen controlled with timers to eliminate any rounding on leading & trailing edges of the panel, 2" wide platen.Specifications --103" long x 43" wide Abrasive belts --Air tracking, floating & rigid bed for sanding of veneers & solid panels; infeed & outfeed spring loaded holddown rolls -- Minimum workpiece length 16" --Thickness capacity 6.25". --Separate 2.5 H.P. variable speed feed motor delivering feed speeds from 15 to 70 FPMNote: The seller has 20 boxes of various sandpaper belts (80 – 150 grit) that will be included.

SCM SANDYA 10/S M2 2-Head Wide Belt SanderHead Configuration1st Head: 7" Diameter Spirally-grooved steel contact roll, 20 HP Motor.2nd Head: Combination head, 7" Diameter Spirally-grooved rubber-coated contact roll, Finishing platen with Electronic sectional pad with EPICS System, 3-1/2" Steel contact roll, 13 kW (17-1/2 HP) Motor.Specifications: -- 4.5 - 9 m/min (15 - 30 FPM) Variable feed speeds, -- Part thickness 4 mm (0.2") to 170 mm (6.7"). -- 43" W x 103" L Abrasive belt, Electronic sanding belt tracking & Pneumatic belt tensioning. -- 34" H Natural rubber feed belt,Equipped with & Features -- Automatic thickness adjustment, Automatic feed belt tracking & Tensioning, -- Motorized rise & fall of working table, -- Part thickness & Conveyor belt speed LED readout, -- Infeed safety bar for operator protection and oversized parts. -- 3" Diameter Entry & exit rolls, 13" L 2-Roll Infeed & Outfeed extensions with 2" Diameter Rollers & Manifold. -- Unopened box of (10) KP520 100 Grit Belts (Purchased for $500).Dimensions: 88" L x 86" W x 90" H.Weight: 4,440 Lbs.

SCM SANDYA 7 RCS Wide Belt Sander2-Head, 42" cap. - Great solid wood finish Sander. -- 1st Head: Grooved steel contact roll, 6-1/4" dia., 30 HP motor -- 2nd Head: Combination head, rubber covered contact roll, 6-1/4" dia. (65 Shore), and 2" wide finishing platen, 25 HP motor. -- 43" x 75" or 85" Abrasive belts with electronic tracking & pneumatic belt tensioning, pneumatic exclusion of all contact rolls. -- Conveyor belt feed with variable feed speed, 14.5 - 30 FPM, 1.5 HP motor, automatic part thickness adjustment, -- Motorized thickness opening with LED readout,0" - 6-1/4" via (4) precision conveyor bed jacks. -- Infeed & outfeed spring loaded rubber covered holddown rolls on all heads, -- Motor load meters, infeed and outfeed conveyor extensions, WYE-DELTA soft start.

SCMI - Sandya 3S/ RCS: 37" Double Head Wide Belt Sander37" Width cap.; Drum, Combination Head.1st Head. 4-1/2" Diameter steel contact drum with: Manual grit set.2nd Head. 4-1/2" Rubber drum with: 2" Wide soft platen.Specifications -- 30 HP - 230 V - 3 Ph Drive. -- DELTA Soft start motor controls. -- Electrical requirements: 91 Amps. -- Anti-dubbing control of platen; rise-fall to protect leading & trailing edges of panels. -- Variable speed conveyor by: Inverter, 12 - 60 FPM with: Digital display for working height. -- Automatic thickness set up. -- 6-1/2" Max. thickness capacity.Equipped with & Features -- Automatic conveyor belt tracking (pneumatic cylinder). -- (2) Platens; soft (for veneer); semi-stiff (solid wood). -- 50 Durometer conveyor belt. -- 2-Roller infeed & outfeed roller tables. -- (4) Top & Bottom fastened jack screws. -- Manual adjustment of contact roller & platen positions; 1,800 CFM. (2) 5" Dust Ports.

DMC SD 60 - TWO HEAD WIDE BELT SANDERSpecifications -- Grooved rubber coated pressing rollers before and after working unit -- 2HP variable speed feed motor 3.5-18 m/min (12-60 FPM) -- Y-Delta two-stage reduced voltage starter on main motor -- Automatic Electronic Table Positioning Device -- In-feed / Out-feed extended tables for easier part feedingEquipped with & Features -- Pneumatic On/Off selector of both rollers and pad -- Adjustable sanding drum and pad position for micro precision adjustment -- Electronic digital thickness readout of work table position -- Powered table lifting by means of four heavy duty motor and lifting columns double fastened at both top and bottom of the lifting columns to provide exceptional table stability -- Electronic tracking of abrasive belt -- Pneumatic belt tensioning with center fulcrum to compensate for tapering of abrasive belt -- Front and rear emergency stop button -- Amperage meter for main motors allows maximum utilization of available horsepower -- Main disconnect switch with the ability to be locked out by padlock -- In feed flexible steel hold down, and anti-kickback plate50 shore, negative profile (waffle style) rubber feed mat -- LOGIC 50 K Electronic Programmer for timing/anti-dubbing of the padSome spec's need to be verified

SCM - S 52, ...Straight Knife Planer20" Width cap.; knife cutterhead; 9 HP main motor (approx.); 1/8" to 9-1/4" motorized opening with mechanical digital readout; max. depth of cut 5/16"; 10" min. length of workpiece; (4) feed speeds at: 21 - 32 - 42 & 55 FPM; table size: 20-1/2" x 33-1/4". -- Equipped with: Chip breaker; sectional grooved infeed & solid outfeed roller.

SCM S 630 K Planer with Tersa HeadSpecifications: -- 24" Width cap.; 12 HP main motor, 2 HP feed motor; 4-3/4" dia. with reversible knife TERSA Planer Head rotates @ 4,500 RPM; -- 1/8" - 11-3/4" Thickness opening via motorized bed with LED readout for fine adjustment. -- Max. depth of cut 5/16"; 10" min. length of work piece; variable infeed speed from 20 - 56 FPM.Equipped with: -- 20-3/4" x 39" Cast iron table, sectional chip breaker, sectional grooved infeed & solid outfeed rollers, adjustable bed rollers. -- neoprene out feed rollersComplete with: -- Magnetic starter and dust hood w/6" dia. dust outlet.Owner states: Condition- like new 24" thickness planer- third owner in a one man shop. Machine has seen very few hours of operation.

SCM Minimax T-50 Tilting Spindle Shaper -- Specifications: -- 1-1/4" Dia. interchangeable spindle tilts -5° to +45°, -- 6.6 HP motor; 3-1/2" cap. under nut, (4) spindle speeds of 1,700 - 4,000 - 7,000 & 9,000 RPM. -- Table size 18" x 43" with adjustable side extension tables; 3" - 5" - 7" & 8" table insert openings -- 4-1/2" max. spindle height above table -- 2" max. tooling retraction under table with 7" max. tooling dia.; working height 37".Equipped with: Outrigger Sliding Table, micro-adjustable fence, spindle lock, magnetic starter w/overload protection, reversing switch, and 4-3/4" dia. dust outlet. Includes: Several New Cutter-heads

SCM T 160 TILTING SPINDLE SHAPER9 HP Main motor, (5) speeds of 2,900 - 4,400 - 6,000 - 7,800 & 10,000 RPM (..but currently with single speed 6,000 RPM pully only!); 1-1/4" dia. interchangeable spindle, 7" spindle length with 4-3/4" motorized vertical spindle adjustment, 9" max. height above table. -- Features: 0° - 45° Motorized tilting, degree tilt gauge, spindle height gauge; max. insert opening 16-1/2", and 39" x 40" table size. -- Complete with: Adjustable fence, mechanical spindle brake & lock, dust hood & reversing switch; NOTE: 3-ROLL FEEDER IS NOT INCLUDED