CASTLE TSM-21 Pocket Hole Boring Machine;Single hole routing system for use with material from 1/2" - 3/4" thickness; -- CASTLE'S "A-Frame" motor carriage engineered to first route a pocket and then drill hole from the other direction. -- Equipped with: 1.5 HP Porter Cable router w/standard "4-flute" router bit for pocket routing and Porter Cable #7301 drill for pilot hole drilling with 9/64" brad point drill bit; foot pedal actuated cycle, will cycle as quickly as (2) cycles/sec. -- The large 2" dia. holddown cylinder firmly clamps material and the low 6" boring angle minimizes shifting, reduces screw breakout and splitting.The TSM-21 is an improved version on the TSM-20. It features a more accurate carriage design, magnetic switches, and solit state electronics.

CATERPILLAR 308E2 CR Compact Hydraulic ExcavatorHigh performance and durability, and its compact radius allows it to work in areas where larger excavators can't operate.Specifications: -- Engine: Cat C3.3B 65 HP -- Operating Weight: Approximately 18,519 lbs (8,400 kg) -- Ground Pressure: 5.26 psi -- Maximum Dig Depth: Up to 163.5 inches -- Maximum Lifting Capacity: 7,385 lbs front / 5,401 lbs side -- Travel Speed: Low: 1.74 mph, High: 3.17 mph -- Bucket Rotation: 180 degrees -- Bucket Size: 24"Equipped with: -- A/C and Heated Cab -- Hydraulic Thumb -- Bolt-on Rubber Pads -- Auxiliary Hydraulics -- Mechanical Coupler -- Front Blade -- U-C 50% remaining

CATERPILLAR D3K2-XL Crawler DozerSpecifications: -- Engine: C4.4 Acert Turbo Diesel Rated Net Power 80 HP @ 2,200 rpm -- Dozer Blade: 103" (6-Way) -- Fuel tank: 51.5 gal -- Operating Weight – XL: 17,544 lbs -- Hours: 3,350Equipped with: -- Cab: EROPS (Enclosed Roll-Over Protective Structure) -- A/C and Heated Cab -- Stable Blade -- Traction Control -- Work Lights -- SBG Steel TracksThis dozer is equipped to handle tough tasks with ease. We are happy to assist in the most economical delivery to your location.

CATERPILLAR 953D Crawler Track LoaderSpecifications: -- Engine: Cat C6.6 150 HP Turbo Diesel -- Bucket Capacities: 1.85 m3 -- Track: 18.89" (double grouser) -- Max. Travel Speed: 6.23 MPH (10 km/h) -- Hours: 9530 -- Under carriage 50%Equipped with: -- ROPS/FOPS Cab -- Air conditioning and heated cab -- Control: Joystick -- Foot steering with counter rotation for tight turning radius -- Auto level -- Auto return to dig -- Auto dump -- Auto throttle up -- Windshield washers and wipers, front and rearAll pins / bushings are tight Machine operates as it should smoothly with no noises or leaks.We can provide financing and also the most economical delivery to your location.

CATERPILLAR 730C2 Articulated Dump TruckThe CAT 730C2 offers reliability and durability, high performance and productivity, superior operator comfort, and lower operating costs.Specifications: -- Rated Payload: 31 Tons. -- Engine: 375 HP CAT Diesel. -- Heaped SAE 2:1 23.00 yd3. -- Struck: 17.40 Yd3. -- Tailgate Heaped SAE 2:1: 24.60 yd3. -- Tailgate Struck: 18.20 Yd3. -- Transmission: 5 to 34 MPH. -- Fuel Tank: 108.8 Gal. -- Raise Time: 12.00 Sec. -- Lower Time 8.00 Sec.Equipped with: -- Tailgate. -- Articulating. -- Air conditioning and heated cab. -- Rearview camera.NOTE. Hours: 6,950; tires: 60%; box: straight; hinge: straight.

CATERPILLAR 953K Crawler Track LoaderSave money and transport time with one rugged machine for land clearing, digging, grading, truck loading, slope work and more. Specifications: -- Engine: Cat C7.1 ACERT -- Engine Power (maximum) – SAE J1995: 177.00 HP -- Bucket Width: 97.30" -- Fuel Tank: 70 gal -- Capacity - General Purpose: 2.40 yd3 -- Ground Clearance: 16.40" -- Digging Depth: 5.50" -- Grading Angle: 110.30" -- Operating Weight: 33,852.00 LbsEquipped with: -- General Purpose Bucket -- Enclosed Cabin -- Joystick Bucket Controls -- Pedal Steering -- Air Conditioning -- Good Undercarriage w/ 19"; Pads -- Hours: 2,214 (still in use)

CATERPILLAR 316FL Crawler Excavator Specifications: -- Reach Boom -16'9" (8'6") Stick -- Max. Digging Depth: 20' -- Max. Reach - Ground Level: 28.83' -- Max. Cutting Height: 29.25' -- Max. Loading Height: 20.58' -- Max. Loading Height: 7.5' -- Max. Depth Cut for 2440 mm (8'0") Level Bottom: 19.33' -- Max. Vertical Wall Digging Depth: 16.25' -- Bucket Digging Force - SAE: 22000 IBF -- Bucket Digging Force - ISO: 25000 IBF -- Stick Digging Force - SAE: 15500 IBF -- Stick Digging Force - ISO: 18000 IBF -- Operating Weight: 39710 Lbs. -- Max. Drawbar Pull: 35053 IBF -- Max. Drawbar Pull: 35053 IBF -- Max. Travel Speed: 3.2 MPHEquipped with: -- Auxiliary Hydraulics -- Quick coupler -- 4,176 hours

CATERPILLAR 311D Hydraulic ExcavatorThe 311D’s hydraulic system is designed for high efficiency and performance. Spacious and quiet, this world class cab lets the operator focus on performance and productivity.Specifications: -- Engine: Caterpillar C4.2 Acert Turbo Diesel 2-Speed -- Net Power @ 2200 RPM: 60 kW / 82 HP -- Bucket size: 28" -- Thumb: 13.5" -- Steel Tracks: 23.5" Equipped with: -- Pre-start Check and Monitor Display -- Heat -- AM/FM StereoNote: Serviced approx. 100 hours ago and has 4732.5 hours total. A "gray market" Caterpillar machine with parts available.

CATERPILLAR 309 CR Mini Hydraulic ExcavatorThe 309 CR Mini Excavator delivers maximum power and performance in a mini size to help you work in a wide range of applications. Specifications: -- Engine: Model Cat C3.3B -- Rated Net Power @ 2,200 rpm -- U.S. EPA Tier 4 Final: 52.4 kW / 70.3 HP -- Machine Swing Speed 10.6 RPM -- Travel Speed – High 4.9 km/h 3.1 MPH -- Travel Speed – Low 2.6 km/h 1.6 MPH -- Fuel Tank 147 L 39 gal Equipped with: -- Sealed and Pressurized Cab -- Steel Tracks with Pads -- Stick Steer Mode -- Travel Cruise Control -- Control Pattern Changer -- Bucket -- Hours: 862Additional attachments available for extra cost upon request

CATERPILLAR 303E CR Mini Hydraulic ExcavatorThe 303E CR Mini Hydraulic Excavator delivers high performance, durability and versatility in a compact design to help you work in a variety of applications.Specifications: -- Engine: Cat C1.3 -- Gross Power: 24.8 HP(18.5 kW) -- Travel Speed (Low): 1.5 MPH (2.4 km/h) -- Travel Speed (High): 2.8 MPH (4.5 km/h) -- Vertical Wall: 77" (1960 mm) -- Boom In Reach: 83" (2110 mm) -- Dig Depth: 108" (2750 mm) -- Machine Swing Speed: 9.00 rpm -- Boom Swing – Left: 80° -- Boom Swing – Right: 50° -- Fuel Tank: 11.90 gal -- Hours: 465Equipped with: -- 1-way and 2-way (combined function) auxiliary hydraulic lines -- Hydraulic thumb -- Manual quick attach -- Control pattern changer -- Dozer blade with float function -- Foot travel pedals -- Rubber track -- Standard stick -- Suspension seat

CATERPILLAR M318C WHEELED EXCAVATOR w/ SCRAP MAGNETFeatures: -- (2) sets of outriggers -- 48" Magnet -- Generator onboard for magnetHours: Approx. 4,536

CATERPILLAR- XQ125, ...100KW DIESEL GENERATOROnly 50 hours!Specifications: --Diesel Generator --HP/KW: 100 kW --Caterpillar Model: XQ125 --Model Year: 2020 --Hours: 55 --Frequency: 60 Hz --XQ125 - C4.4 engine. --Rating - 125 KVA, --100 KW prime, 60 Hertz, 3 Phase, 12 wire.

CEFLA EASY 2000/D Automatic Spray Finishing Machine: 2010 CEFLA "EASY 2000 D" Reciprocating Sprayer: -- Sprayer fabricated using coated sheet panels, uses a Centrifugal fan for intake of room air to upper air diffusion hood inside of cabin to pressurize the spray area. -- Conveyor speeds variable from 2 - 8 MPM. Belt width capable to carry 1,600 mm (5') wide charge through the machine. -- Machine is PLC Controlled. The Superior Coating application is achieved by utilizing a "back spray" technique. The machine uses a slide-out material recovery system consisting of (2) rollers. -- Infeed & outfeed Conveyors with lift cylinders. -- Includes: (2) Reciprocating arms traveling on polished rods, hydraulic shock absorber provides smooth operation. -- Parts are read at the Infeed of the Conveyor by a photodiode light bar that reads the size of the part and sends that information to the PLC to control the Spray Gun action. -- Machine is equipped with (2) paint circuits.THIS MACHINE IS CURRENTLY BEING RECONDITIONED WITH OUR SUPPLIER IN ITALY AND WILL BE AVAILABLE APRIL 2025.

CEFLA PRIMA 1,300 mm (51.18") W Single-Arm Automatic Oscillating Spray Coating System, with (4) Spray Guns & (2) PumpsSpecifications: -- For water or solvent-based coating of wood, plastic, glass, & metal. -- Feeds right-to-left. -- Working width 1300 mm (51.18"), Min. panel length 250 mm (9.84"). Max. panel thickness 60 mm (2.36"). -- Paper roll width 1520 mm (59.84"), Paper roll length: 2400 M (7,874'), Paper roll dia. 520 mm (20.47"). -- Conveyor speeds 1 - 3 MPM (3 - 10 FPM). -- Chamber size 11’ W x 6’ L x 3-1/2’ H.Equipped with: -- Heavy-duty spray arm, with (4) C.A. TECHNOLOGIES "BOBCAT "66-250" Automatic air assisted airless spray guns with Max. fluid pressure 2,500 PSI, (2) High pressure feeding circuits, & Electronically-controlled oscillation speed. -- 11’ L Disposable paper-covered vacuum belt conveyor, with 2-1/4"; Dia. Infeed & Outfeed rollers on 4-3/8"; Centers, & Vacuum unit. -- Automatic paper payoff & take-up system, with Unwinder with adjustable mechanical brake & Winder with Air motor. -- Automatic panel shape & panel detection system. -- Removable overspray tanks with Filters. -- Natural air inlet, with 2-Stage Large-surface dry filters. -- 4.6 kW (6 HP) High efficiency exhaust fan. -- Dual chamber lights. -- Control, with PLC, SCHNEIDER ELECTRIC "MAGELIS" Graphic Terminal with 6" Color LCD touchscreen, & Diagnostics.Complete with: -- Manual. -- (2) C.A. TECHNOLOGIES "C-20 70-1500" 2 GPM 20:1 Cart-Mounted Stainless Steel Fine Finish Pumps, Each with Fluid volume 2 GPM at 60 Cycles/Min, Max. fluid pressure 2,000 PSI, Max. air pressure 100 PSI, & 5 Gallon Siphon hose assembly. -- C.A. TECHNOLOGIES "54-405" 5 Gallon Pail-Mounted Stainless Steel Mixer. -- 60"; W x 3’ L x 36"; H Infeed & Outfeed Motorized Roller Conveyors, Each with 1-7/8"; Dia. Coated rollers on 4"; Centers & 1/4 HP - 1,700 RPM Motor.

CEFLA EASY 2000D Reciprocating Feed Through Sprayer and Vertical Oven Finishing Line:This line is still in operation with the original owners, it have never run full time, there are weeks when it is 1 day per week. It is recommended with a line of this age to do a full recondition prior to or as it is being installed. If that is not possible, it is still running and can be seen that way. CEFLA Complete 52" (1,300 mm) Finishing Line with: SORBINI Panel Cleaner, "EASY D 2000 W" Reciprocating Sprayer, Conveyor(s), and CEFLA Hot Water Vertical Oven. The line is composed of the following:001) Belt conveyor CEFLA "TN 2500"002) Panel cleaning / brushing machine SORBINI "VS 33"003) Automatic spraying machine CEFLA "EASY 2000 DRY SYSTEM" with pressurized cabin004) Transfer conveyor005) CEFLA PIEFFE PF2 VL/6 7500 pass through oven006) Vertical Oven, (3) chambers with belts CEFLA "VN 2000"007) Unloading Conveyors

CEFLA "ROTOSTAIN RT 2000 10 + 10 Rotary Stain Machine with: -- 20 Guns; utilized for automatic application of stain material on workpieces; the "Roto-Stain ROT 10 + 10" represents a new generation Spray Machine from CEFLA, the leader in CEFLA "ROTOSTAIN RT 2000 10 + 10 Rotary Stain Machine with: -- 20 Guns; utilized for automatic application of stain material on workpieces; the "Roto-Stain 2000 10 + 10" represents a new generation Spray Machine from CEFLA, the leader in technology development for spraying applications. -- The "Roto-Stain 2000 10 + 10" incorporates CEFLA's previous innovative developments into a machine with maximum capabilities (line speed and production output) for stain application. -- Continuous 65" width carbon fiber belt enables the recovery of over sprayed coating material for reuse. -- Cefla's patented conveyor belt system for coating recovery and belt cleaning is controlled by the PLC and recovers approximately 98% of the coating material deposited on the belt, which is then automatically cleaned with "Coating Appropriate Solvents" -- The automatic air flow system monitors and maintains consistent air flow/pressurization through spray booth. When filters become too plugged to maintain sufficient air flow, system operation is ceased --electronic control unit utilizes a 60 cell photodiode bar to monitor and regulate spray application, further maximizing application transfer efficiency -- Spraying is performed through a rotary system designed for the installation of ten plus ten (10 + 10) guns in (2) coating supply circuits with recycle.TECHNICAL SPECIFICATIONS: Working width from 0 - 1300mm ( 0 - 51") Minimum workpiece length 305mm (12") Speed range from 2 - 11 m/min (6.6 - 36 ft/min) Power consumption 10.7 kW Compressed air required 50 NI/min (1.8 cfm) Exhausted solvent /air mix 10000 mc/h (5886 cfm)

CEFLA ROCTRE D Automatic Spray Finishing Machine: for HIGH VOLUME PRODUCTIONThickness: Max. 50 mm (2"); Min. 5 mm (0.2").Maximum Line speed: 20 MPM (65 FMP).Equipment Specifications:CEFLA, model ROC 3 D. Is a Two Arm reciprocating Spray Machine: -- Parts are fed under the Part Reading Bar to measure size and spray parameters on a continuous CFB belt conveying system. -- Lacquer recovery and belt cleaning are accomplished by means of a "cleaning trolley" located under the exist end feed belt. Made up of counter-rotating rollers with scraper and belt cleaning unit, with 3 rollers and stainless-steel troughs: all the rollers are fitted on the motorized trolley longitudinally removable by hand pulling of trolley out. -- Powered outfeed tilt able belt lifts to approach the cleaning trolley. -- (2) Oscillating arms equipped to accept a maximum of (8) guns, four per arm and driven by a Brushless servo motor.There are (2) Separate lacquer feeding circuits with recycling system. -- This is a fully pressurized spray cabin with an exhaust air filtering system for overspray using double dry filters set, primary filter and secondary . -- Electronic control cabinet to monitor spraying functions.Booth consists of sandwich paneling and air is pushed in through (2) air intake ducts (positioned between guns) above the slanted perforated top panels made up of fine filter material help to reduce turbulence. parts running through the sprayer can be viewed by means of a large front viewing window/access panel which can be lifted to access the guns and interior of the sprayer. Note: EX-FACTORY’s Logistic Department is experienced and set up to provide “Full Service Logistic"; from Overseas Suppliers to your Door. …Packaging, Container Loading, Ocean Freight, Marine Insurance (door to door), US or Canadian Customs, Duty and domestic shipping to your Plant Door.

CEFLA TR3500/CT RUBBER ROLLER CONVEYOR48" infeed/outfeed power conveyor, 140" long, rubber roller conveyor.

CEFLA TNS 3650/RBT BELT CONVEYOR146"L x 60" belt conveyor. 0.75 kW motorNOTE: Will need a new belt, not included in the price.

CEFLA TRC 2000 POWERED ROLLER CONVEYOR72"L x 60"W rubberized roller conveyor with .75kw motor