MATTISON - 69-42 MATTI-MAX: Heavy-Duty Automatic Rotary, high production Turning Lathe with Hopper FeedMicroprocessor controlled for quality turnings and ease of setup; 42" long turning cap. with rotating rear arbor; 4" x 4" max. and 3/4" x 3/4" min. stock size. -- Drives & Speeds: Equipped with: 25 HP - 2,700 RPM Cutterhead Drive; 2-5/8" dia. arbor with variable speed. -- 2 - 45 RPM Stock rotational speed with: 1.5 HP DC Drive (reversing) & self-contained hydraulic unit for precise feed control.Complete with: -- Automatic hopper feed; MATTI-MAX microprocessor-based PLC Controller with keypad entry; machine functions & operation parameters are set directly from the control; RPM of workpiece & feed rate can be programmed to vary during the cut.Matching the feed rate to the stock rotational speed produces an efficient cut.Features -- MATTI-MAX Allows rough cutting at higher speeds (especially rounding of corners) and fine finish cutting at slower speeds. -- Pneumatic tailstock with: Dual pressure to ensure penetration of spur center at high pressure and can be adjusted lower for small dia. turnings. -- Total electrical load: 26.5 HP. -- Setup Stand.NOTE: Large quantity of knife & heads available for additional cost.

MATTISON - 202: Straight Line Rip SawSpecifications -- 15 HP - 3,400 RPM Saw arbor motor; 9" - 14" max. blade capacity; 1-1/2" diameter arbor; overhead arbor design. -- 4" Max. depth of cut: 13" Min. stock length; 24" max. rip capacity to the right of the blade; 77" x 65" table size.Equipped with & Features --Overhead holddown with: (6) Pressure rollers; (3) front and (3) back; 2 HP feed drive; (4) feed speeds of: 56 - 84.Note from the seller : Chain and lead guides are in very good condition.

MATTISON - 202: Straight Line Rip SawSpecifications -- 15 HP - 3,400 RPM Saw arbor motor; 9" - 14" max. blade capacity; 1-1/2" diameter arbor; overhead arbor design. -- 4" Max. depth of cut: 13" Min. stock length; 24" max. rip capacity to the right of the blade; 77" x 65" table size.Equipped with & Features --Overhead holddown with: (6) Pressure rollers; (3) front and (3) back; 2 HP feed drive; (4) feed speeds of: 56 - 84.

MATTISON - 404: Straight Line Rip SawSpecifications -- 15 HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.); 1-1/2" dia. arbor; 4" thickness capacity. -- Table size: 65" x 77" long. -- 30" Distance from: Saw to left edge of table. -- 24-1/4" Between saw & column; 24" rip distance: To right of gauge. -- Top roller holddown with: 7-1/2" Shortest stock handled under (1) roll; 15" under (2) rolls.Equipped with & Features -- Overhead cutting design with: Single cast chain links. -- Chain with: Automatic oil lubrication. -- Variable feed speed.NOTE from Seller: Saw will give an 8-foot glue line!

MATTISON - 404, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.), 1-1/2" dia. arbor; 4" thickness capacity. -- Table size: 65" x 77" long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column, and 24" rip distance to right of gauge. -- Top roller holddown with 7-1/2" shortest stock handled under (1) roll; 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. -- Chain with automatic oil lubrication.. --4-Speed Feed: 62 - 93 - 124, & 186 FPM.

MATTISON - 202, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,400 RPM Saw arbor motor, 9" - 14" max. blade capacity, 1-1/2" diameter arbor, overhead arbor design. -- 4" Max. depth of cut, 13" min. stock length, 24" max. rip capacity to the right of the blade, 77" x 65" table size.Equipped with & Features: --Overhead holddown with: (6) Pressure rollers, (3) front and (3) back; 2 HP feed drive, (4) feed speeds of 56 - 84 - 112 & 168 FPM (fixed at 25 FPM ).

MAX-PAK MP 60 HD-15 Vertical BalerSpecifications: -- 15 HP Motor --Nominal Bale Size 60" x 30" x 48" --Bale Weight Up to 1000 Lbs OCC --Platen Pressure 40.91 PSI --Average Cycle Time 49 Seconds --Loading Height 54-1/2" --Ejector System Semi-Automatic --Full Bale Switch Standard

MAYER PS 9Z Front Load Panel Saw 149.6" Cutting length (3,800 mm), 4.1" (105 mm) max saw blade projection,Equipped with: -- 17.5 HP (9 kW) main saw motor & 1.5 HP (1.1 kW) scoring motor, 355 mm dia. main blade and 127 mm dia. score blade dia.; saw carriage with rack & pinion drive, forward cutting speed 16 - 230 FPM, constant return speed 232 FPM. -- Electronically controlled overhead program fence with rack & pinion drive on hardened & ground guideways, forward speed 80 FPM, return speed 196 FPM. -- Saw Table with: (7) Clamps (open up to 3.1" / 80 mm), of which (3) are closely spaced in crosscut area and the other (4) are at equal distance in rip cut area; AC Servo motor drives on both the saw carriage and pusher fence; rear table with double row support rollers. -- Features: -- PC Front-End WINDOWS XP Operating System, moving graphics displayed on 14" color monitor mounted in a pivoting console, (2) serial & (1) parallel interface; data input by PC keyboard, prepared for possible direct downloading from office PC. -- Control System Features: Automatic cutting length (material is scanned by sensor underneath the packet on the saw bed), electronically controlled automatic cutting height adjustment, automatic trim calculation; cabinet air conditioning. -- Includes: -- (8) Rear support rails with rollers; 78.7" long cross-cut fence; automatic side aligner (.75" to 51") with automatic presetting; rear slotted pressure beam to minimize off-cut; (3) front mounted air table (78" x 25"); plastic segmented safety guards on front of pressure beam; safety fencing around the back section of the machine.

MB Roba-Tech - 1300/2: Denibbing Rotational Brush SanderSpecifications -- Feed Belt: 1,300 mm (51") working width. -- Feed Speeds: 3 - 12 MPM (9 - 36 FPM). -- Vacuum Bed System.Head Configuration -- Cleaning Brush for feed belt. -- Rotational Brush Sanding Unit. -- Working width: 1,300mm (51"). -- Sanding Speed: 30 -140 MPM (98 - 459 FPM). Equipped with & Features -- Touch Screen controls. -- Wired for: 480 V - 3 Ph.

The MB ROBA-TECH 1300/2 is an industrial rotary brush sander used for sanding, deburring, and surface finishing solid wood components, MDF, lacquered panels, and profiled parts. The machine utilizes a system of rotating abrasive brushes combined with a vacuum conveyor belt that holds parts firmly in place during the process, enabling uniform sanding even on complex surfaces, moldings, grooves, and decorative profiles. Its multidirectional sanding technology ensures optimal surface preparation for subsequent painting, lacquering, or assembly processes, enhancing finish quality and increasing efficiency in the industrial manufacturing of furniture, doors, and wood components.Machine type: Industrial rotational brush sander• Model: MB ROBA-TECH 1300/2• Operation type: Sanding, deburring, and surface finishing• Effective working width: 1300 mm (51"")• Vacuum conveyor belt feed system• Feed speed: 3 – 12 m/min• Integrated vacuum system for workpiece hold-down• Rotational brush sanding unit• Sanding speed: 30 – 140 m/min• Interchangeable abrasive brush system• Approximate effective sanding area: 1300 × 1500 mm• Sanding head with 360° rotation• Conveyor belt cleaning brush• Motorized height adjustment of the sanding unit• Touchscreen control• Power supply: 480V 3-phase• Approximate installed power: 16 kW• Industrial dust extraction system• Capability for sanding flat and profiled surfaces• Approximate weight: 2600 kg• Approximate dimensions: 3860 × 2400 × 2000 mm"

Purchased from MC3 Manufacturing in Kingsville, ON -- Received NEW April 27, 2023; used since purchase: 0 Hours. --230 V - 3/60. Controls: Incoming 110 V; outgoing: 230 V. -- Start/Stop/Variable Speed; Estop: Motor start switches & emergency stop pull cable systems installed around all conveyors. -- All electrical motors, cabling, and panels meet: Zone 22 explosion-proof classification. -- Slider bed belt Conveyor (D-Style). -- Pulley c/c length: 206". -- Horizontal length: 92". -- Conveyor incline: 21°. -- Conveyor elevation: 90" At load end; 163" discharge end. -- Side rails: Included; 12" height. -- Belt width: 18". -- Between frame width TBV Belt-type: 3-Ply "Poly CR74" white PVC; 2-3/4" cleats at 12" centers; full width between side walls with: 60 mm Height white TPU side walls. -- Belt speed (max): 66 FPM. -- 206"; L x 39"; W x 23"; H; weight: 9,000 Lbs.

MCDONOUGH Bandmill 62″ Bottom Wheel.9-1/4" Face, 1-3/8" thick.

ME.SA M21 BORING MACHINE21-Spindle boring head on 32 mm centers, drills vertically from bottom up and head rotates to horizontal position for edge boring, head rotation is manual tilting with assistance from a strut. -- 2-3/4" Max. drilling depth, 2 HP - 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size, max. workpiece width 31-1/2". -- Equipped with: Left & right side fences with stops for mirror-image fence setting for right- & left-hand boring, (2) pneumatic holddown clamps, pneumatic foot pedal control, and magnetic starter with overload protection.

MERCADOR - 40 HP Dual Shaft Shredder -- (2) 20 HP Motors. -- Only (43) hours.

Mereen-Johnson 424 Gang Rip sawSpecifications -- 24" Arbor cap., -- 14" max. dia. tooling, -- 3-1/2" max. manual thickness adjustment, -- 14" min. length for glue joint accuracy and 22" min. for busting only, -- 6" throat. Equipped with and Features: -- 75 HP - 3,600 RPM TEFC Direct drive motor, -- 2-3/16" dia. arbor with disc brake, -- Load meter and slip-off outboard bearing. -- Feed & chain: 3 HP Variable feed speed 30 to 170 FPM, -- M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain -- "Quad Life" hardened dip cams -- Extruded structural aluminum feed bed slats with replaceable steel-backed rubber insert strips --, Automatic chain oiler. -- (4) 3" Dia. air-loaded overhead pressure rolls; full-width spring-loaded overhead bed plate, -- Pressure rolls and bed plate unit with scale & pointer thickness reference; -- Anti-kickback finger system with (1) lower & (2) upper on infeed. -- Sound enclosure, -- (2) Upper dust hoods (1) 10" & (1) 5" dia., and (1) lower 4" dia. hood, -- Requires 3,820 CFM;Also included: -- (7) Lasers with mounting rack -- (2) additional arbor and lots of spacers

MEREEN-JOHNSON 419-DC Gang Rip SawSpecifications: -- 19" Arbor cap., -- 14" max. dia. tooling, -- 3-1/2" max. manual thickness adjustment, -- 29" min. length for glue joint accuracy and 22" min. for busting only, 6" throat.Equipped with & Features: -- 75 HP - 3,600 RPM drive motor with direct drive to arbor. -- Feed & chain: 3 HP Variable feed speed 30 to 150 FPM, -- M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, and chain oiler. -- (4) 3" Dia. spring loaded overhead pressure rolls (with new springs); full width spring loaded overhead bed plate, pressure rolls and bed plate unit with scale & pointer thickness reference; anti-kickback finger system , -- (1) lower & (2) upper on infeed (kickback fingers are newly replaced). -- (2) Upper dust hoods (1) 10" & (1) 5" dia., and (1) lower 4" dia. hood; requires 3,820 CFM; -- Notice the feed chain - it's in exceptional condition!Note from the seller -- Mereen Johnson model 419 DC straight line gang rip saw. Glue joint capable 19"; width 4"; height capacity75 HP. 480 Volt. This is a very good machine with low hours and runs great . Two arbor sleeves with spacers and blades and a Set of new rubber inserts

MEREEN JOHNSON 435-H/DC Panel Rip Saw; 61" Arbor Length;This is a very hard to find 50″ width capacity Mereen Johnson 435-H Multiblade Gang Rip Saw. While older this one is priced right as new ones are 20 times our asking price. Very rare opportunity to own a 50″ width capacity MJ!Working dimensions: 50″ wide x 2-1/2″ thickness ripping dimensionSpecifications -- 75 HP - 3,600 RPM TEFC Direct drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- Feed & chain: 3 HP Variable feed speed approx.20-75 FPM with adjustable jam protection.Equipped with & Features -- Feed: 3 HP feed motor 20-75 FPM. -- Feed system with oil mist lubrication of bottom chain surface and extended pins on chains including automatic -- Low oil and air supply level control, system shut-off feed drive motor to prevent running machine without proper lubrication. -- Upper in-feed pivoting anti-kickback assemblies are provided for operator safety. IIncludes: (24) 10″ inch blades and also included are (10) blade collars.Weight: Aprox 15,000 lbsNOTE: ONLY 3.800 HOURS!

MEREEN-JOHNSON Model 524-DDCSR 2+4 Double Arbor Gang Rip SawSPECIFICATIONS: -- First Arbor Arranged with Two (2) Independently Adjustable Select Saw Assemblies for Mounting Hogging Blades -- Second Arbor with Four (4) Independently Adjustable Select Saw Assemblies -- Arbor Space 24" -- Thickness Capacity to 1-3/4" with 12" Tooling and 2-3/4" Using 14" Tooling -- Minimum Length 30"Equipped with & Features -- Two (2) M-J Direct Drive Motors 75 HP Each -- Feed Motor 7.5 HP TEFC, 30' to 235' rate with Frequency Inverter Speed Control -- Saw Set Up for Second Party Optimizing System.

MEREEN-JOHNSON "312-DC-OPH1" DIP CHAIN GANG RIP SAWSpecifications -- 12" Arbor cap., -- 14" max. dia. tooling, 3-1/2" max. thickness, -- 30" min. length for glue joint accuracy & 22" min. for busting only; -- 6" throat. Equipped with: & Features -- 50 HP - 3,600 RPM TEFC Direct drive motor, -- Arbor with disc brake & load meter, arbor lockout on access door.Feed & chain: -- 3 HP Variable feed speed from 30 - 150 FPM with adjustable jam protection, -- M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams. -- Extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, -- Automatic chain oiler with low level shutoff. -- (4) 3" Dia. air loaded overhead pressure rolls; -- Full width segmented maple, spring loaded overhead pressure shoe -- Pressure rolls & pressure shoe unit adjust with scale & pointer thickness reference -- Anti-kickback fingers. -- Lasers at infeed for pocket location.

MEREEN JOHNSON 424 DC Multiple Blade Rip Saw:Specifications: -- 24" Arbor cap., 14" max. dia. tooling, 3-1/2" max., 22" min. length, 6" throat. -- 75 HP - 3,600 RPM TEFC Direct drive motor, arbor with disc brake. --Feed & chain:3 HP Variable feed speed from 50 to 150 FPM, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, -- "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low-level shutoff. --Equipped with & Features: -- (4) 3" Dia. air-loaded overhead pressure rolls -- Full width spring-loaded overhead bed plate -- Height adjustment with scale & pointer reference -- Anti-kickback finger system with (1) lower & (2) upper on infeed. -- (2) Upper dust hoods, (1) 10" & (1) 5" dia. & (1) lower 4" dia. hood -- Requires 3,820 CFM